No entries match these filters. Clear filters
edb-debugger 1.6.0 adds hardware breakpoint dialog, bookmark save/restore with library load awareness, cancelable searches, function block comments, and Qt6 support︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
└──▷ GET THIS VERSION
copy
$ git clone --branch 1.6.0 https://github.com/eteran/edb-debugger.git
$ git checkout 1.6.0
└──▷ HOW TO FIND IT
When debugging a binary that uses dynamic libraries, use bookmark save/restore to keep your analysis positions intact across restarts where library base addresses may shift.
📍 In the Bookmarks panel, set your bookmarks as usual; they are automatically saved and restored with library load awareness on the next session.
When you need to trigger on memory access or execution without consuming a software breakpoint slot, open the hardware breakpoint dialog from the debug menu to configure a hardware breakpoint.
📍 In the debugger menu, open the hardware breakpoint dialog, select the address, condition (execute, read, write), and width, then apply.
edb-debugger now shows which bookmarks have breakpoints set, making it easier to distinguish breakpoint-annotated bookmarks at a glance.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet edb-debugger adds a hardware breakpoint dialog for configuring hardware breakpoints through the UI. Not checked yet edb-debugger adds bookmark save/restore with library load awareness, so bookmarks persist correctly across sessions that involve dynamic library loading. Not checked yet edb-debugger adds cancelable search in most or all dialogs, allowing long searches to be interrupted. Not checked yet edb-debugger adds automatic function block comments before detected functions in the disassembly view. Not checked yet
+2 more
show less
edb-debugger now supports building and running with Qt6, including Qt 6.11. Not checked yet edb-debugger adds the ability to reset the UI layout from within the GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. . Not checked yet
edb-debugger now shows which bookmarks have breakpoints set, making it easier to distinguish breakpoint-annotated bookmarks at a glance.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet edb-debugger adds a hardware breakpoint dialog for configuring hardware breakpoints through the UI. Not checked yet edb-debugger adds automatic function block comments before detected functions in the disassembly view. Not checked yet edb-debugger now supports building and running with Qt6, including Qt 6.11. Not checked yet edb-debugger adds the ability to reset the UI layout from within the GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. . Not checked yet
2 more in Everything
edb-debugger 1.5.0 adds XFCE terminal support and initial translations infrastructure
└──▷ GET THIS VERSION
copy
$ git clone --branch 1.5.0 https://github.com/eteran/edb-debugger.git
$ git checkout 1.5.0
edb-debugger 1.2.0 adds I/O pipe redirection for child processes
└──▷ GET THIS VERSION
copy
$ git clone --branch 1.2.0 https://github.com/eteran/edb-debugger.git
$ git checkout 1.2.0
Introduced the ability to redirect I/O in and out of the child process via pipes Not checked yet
1 detail in Everything
edb adds --symbols CLI flag to generate ELF ELF The standard binary format for executables, shared libraries, and object files on Linux and most Unix-like systems, giving cyber tools a predictable structure to parse, instrument, or analyze compiled code. symbol files directly.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2010-10-16 https://github.com/eteran/edb-debugger.git
$ git checkout 2010-10-16
└──▷ TRY IT
Generate a symbol map for an ELF binary directly using the new built-in command.
copy
$ ./edb --symbols <filename>
Adds ELF symbol file generation capability built into edb Not checked yet
1 detail in Everything
edb-debugger adds OpenBSD support, new ROP gadget finder plugin, and run until return feature.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2010-10-10 https://github.com/eteran/edb-debugger.git
$ git checkout 2010-10-10
Adds New ROP gadget finder plugin for finding Return-Oriented Programming sequences Not checked yet Adds experimental run until return support to execute code until a function returns Not checked yet Adds OpenBSD platform support allowing the debugger to compile and attach Not checked yet
3 details in Everything
edb-debugger adds Ctrl+G global goto shortcut
└──▷ GET THIS VERSION
copy
$ git clone --branch 2010-07-02 https://github.com/eteran/edb-debugger.git
$ git checkout 2010-07-02
edb-debugger 2010-03-31 updates DumpState plugin, removes Ctrl+C version check, and fixes UI updates
└──▷ GET THIS VERSION
copy
$ git clone --branch 2010-03-31 https://github.com/eteran/edb-debugger.git
$ git checkout 2010-03-31
Adds options to the DumpState plugin to control its output Not checked yet Uses the current data view tab as the basis for the DumpState plugin data output Not checked yet Removes ctrl+c keyboard shortcut mapping that previously checked version Not checked yet
3 details in Everything
edb-debugger adds flow control command highlighting for improved readability.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2010-02-26 https://github.com/eteran/edb-debugger.git
$ git checkout 2010-02-26
└──▷ HOW TO FIND IT
Visually distinguish jumps, calls, and returns during debugging sessions.
📍 Open edb-debugger v2010-02-26
edb-debugger adds Heap Graphs feature to visualize memory node relationships
└──▷ GET THIS VERSION
copy
$ git clone --branch 2009-10-17 https://github.com/eteran/edb-debugger.git
$ git checkout 2009-10-17
Adds Heap Graphs visualization to show relationships between heap nodes Not checked yet
1 detail in Everything
edb-debugger adds region-based binary info plugins for runtime analysis.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2009-07-11 https://github.com/eteran/edb-debugger.git
$ git checkout 2009-07-11
edb-debugger 2009-07-03 adds plugin tab support and non-fuzzy function analysis.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2009-07-03 https://github.com/eteran/edb-debugger.git
$ git checkout 2009-07-03
Added --no-fuzzy flag or config option to disable fuzzy logic in the analyzer for faster, higher-quality function discovery. Not checked yet Plugins can now add custom tabs to the options dialog via a new API hook. Not checked yet
2 details in Everything
edb-debugger adds UTF-16 string search and SIGCHLD-handling waitpid with timeout
└──▷ GET THIS VERSION
copy
$ git clone --branch 2009-06-20 https://github.com/eteran/edb-debugger.git
$ git checkout 2009-06-20
Enables UTF-16 support in base string searching routines (limited to ASCII subset for now) Not checked yet Implements waitpid with a timeout by safely catching SIGCHLD using Qt4 Not checked yet
2 details in Everything
edb-debugger v2009-02-10 enables plugin-based session handlers
└──▷ GET THIS VERSION
copy
$ git clone --branch 2009-02-10 https://github.com/eteran/edb-debugger.git
$ git checkout 2009-02-10
session_handler moved from core code to a plugin interface Not checked yet
1 detail in Everything
edb-debugger adds stack ASCII string search and context menu plugin hooks
└──▷ GET THIS VERSION
copy
$ git clone --branch 2009-01-22 https://github.com/eteran/edb-debugger.git
$ git checkout 2009-01-22
Added Find ASCII string in stack feature that searches for pointers to matching strings on the stack. Not checked yet Plugins can now add items to various context menus. Not checked yet
2 details in Everything
edb-debugger gains a complete plugin system and Windows attaching support
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-12-10 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-12-10
Complete the new plugin system which decouples internal components and restores normal operation. Not checked yet
1 detail in Everything
Introduces PluginAPI structure and m_API variable for plugin initialization in EDB debugger.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-12-08 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-12-08
Adds PluginAPI structure passed to every plugin upon init for strict control over plugin capabilities Not checked yet Exposes m_API variable within plugins to access the copied interface code Not checked yet
2 details in Everything
edb-debugger 2008-12-06 adds initial UTF-16 string analysis framework and Win32/Win64 support
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-12-06 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-12-06
Starts a framework for supporting UTF16 strings in analysis Not checked yet
1 detail in Everything
edb-debugger 2008-08-25 adds GS/FS segment base retrieval for expression resolution and syscall breakpoint tricks
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-08-25 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-08-25
Adds support for resolving the base of GS and FS segments in expressions to allow the instruction analyzer to correctly display certain values Not checked yet
1 detail in Everything
Adds Follow Immediate in Dump and Follow Immediate in Stack CPU CPU The main general-purpose processor in a computer. It runs application instructions and coordinates work with memory and other hardware. context menus to edb-debugger
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-07-15 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-07-15
└──▷ HOW TO FIND IT
Use the new CPU context menu options to quickly trace immediate values in dump or stack windows.
📍 Right-click in the Dump/Stack window and select Follow Immediate in Dump / Follow Immediate in Stack
edb-debugger adds right-click Follow context menu to evaluate JMP/CALL operands
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-07-13 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-07-13
└──▷ HOW TO FIND IT
Navigate to a target address for a JMP/CALL instruction directly from the CPU CPU The main general-purpose processor in a computer. It runs application instructions and coordinates work with memory and other hardware. disassembly view without manual entry.
📍 Right-click on a JMP or CALL instruction in the CPU view, select Follow from the context menu.
Adds a Follow item to the CPU context menu that scrolls the view to evaluated JMP or CALL operand addresses Not checked yet
1 detail in Everything
edb-debugger adds function bounds visualization and fine-grained QHexView scrolling
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-07-03 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-07-03
└──▷ HOW TO FIND IT
Navigate hex dumps with byte-level precision in QHexView widgets.
📍 Press Control+Up or Control+Down while focusing a QHexView widget.
Adds graphical indication of function bounds based on analysis results Not checked yet
1 detail in Everything
edb-debugger gets centralized analysis engine with FunctionFinder plugin and EIP context menu action.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-07-01 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-07-01
└──▷ HOW TO FIND IT
Analyze the currently selected region in the disassembly view to find functions using the new centralized engine.
📍 In the disassembly view, select a region and press Ctrl+A
Set the Instruction Pointer (EIP) to a specific instruction in the CPU CPU The main general-purpose processor in a computer. It runs application instructions and coordinates work with memory and other hardware. context menu.
📍 Right-click an instruction in the CPU view › set EIP to selected instruction
Adds centralized analysis engine accessed via Ctrl+A to analyze the current region. Not checked yet Adds 'set EIP to selected instruction' option in CPU context menu. Not checked yet
2 details in Everything
edb-debugger 2008-06-18 extends OpcodeSearcher to 8-byte opcodes and adds edisassm backend support
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-06-18 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-06-18
OpcodeSearcher now considers opcode sizes up to 8 bytes (previously limited to 4) Not checked yet OpcodeSearcher plugin rewritten to use edisassm for improved robustness Not checked yet
2 details in Everything
edb-debugger adds partial 64-bit disassembly via edisassm
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-05-06 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-05-06
The edisassm component now partially disassembles 64-bit code Not checked yet
1 detail in Everything
edb-debugger adds 64-bit support via template-based Instruction and Operand classes
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-04-30 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-04-30
Instruction and Operand now accept a template parameter (e.g., <32> or <64>) to select architecture width Not checked yet
1 detail in Everything
edb-debugger adds preliminary hardware breakpoint support for Intel via DebuggerCore.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-02-25 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-02-25
edb-debugger 2008-01-24 adds symbol display in disassembler and improved function finder
└──▷ GET THIS VERSION
copy
$ git clone --branch 2008-01-24 https://github.com/eteran/edb-debugger.git
$ git checkout 2008-01-24
Function finder plugin now assigns bonus points to functions that have known symbols. Not checked yet
1 detail in Everything
edb-debugger adds --run flag to launch and attach to a new process via CLI
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-12-10 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-12-10
└──▷ USE IT
Launch edb attached to a new process with specific arguments for immediate debugging.
shell
copy
./edb --run /bin/ls /etc /bin
Adds the --run command-line option to execute and attach to a program directly Not checked yet Supports passing arbitrary arguments to the target program when using --run Not checked yet
2 details in Everything
Adds EDBTypes.h macros for architecture detection and x86-64 compilation groundwork
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-11-24 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-11-24
EDB_X86_64 and EDB_X86 macros defined in EDBTypes.h based on build architecture. Not checked yet EDB_FMT_PTR format specifier added to EDBTypes.h for edb::address_t output. Not checked yet Adds x86-64 compilation support to DebuggerCore, laying groundwork for future arch-sensitive features. Not checked yet
3 details in Everything
edb-debugger now identifies jump sources for instructions during analysis
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-11-15 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-11-15
Adds identification of jump sources to instruction analysis, attempting to find nearby relative jumps targeting the current instruction Not checked yet
1 detail in Everything
edb-debugger adds Check On Start plugin option for automatic version checks
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-11-06 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-11-06
└──▷ HOW TO FIND IT
Enable or disable automatic version checking on debugger startup via the UI.
📍 In the menu, go to Plugins › CheckVersion › Check On Start
Adds Plugins -> CheckVersion -> Check On Start menu item to automatically check for new versions on startup Not checked yet
1 detail in Everything
edb-debugger 2007-10-23 adds automated function detection algorithm
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-10-23 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-10-23
Adds an algorithm to enumerate potential functions by disassembling all addresses and using call reference counts (>=2) to identify code bounds. Not checked yet
1 detail in Everything
edb-debugger 2007-10-09 adds support for debugged application arguments containing spaces.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-10-09 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-10-09
└──▷ TRY IT
Pass a file path with spaces as an argument to the debugged application using quoted syntax.
copy
$ edb --args "my app" "file with space.txt"
Added support for arguments with spaces in them. Not checked yet General code cleanups and optimizations Not checked yet
2 details in Everything
edb-debugger adds variadic logging to Debugger::log
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-09-10 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-09-10
└──▷ USE IT
Log formatted debug messages directly in custom edb-debugger scripts or plugins without intermediate string buffers.
code
copy
Debugger::log("User %s connected from %s", username, ip_addr)
Makes Debugger::log a variadic function, allowing formatted output directly without temporary variables Not checked yet
1 detail in Everything
edb-debugger adds readPages interface to accelerate large block data reads.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-09-05 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-09-05
readPages routine added to the DebuggerCoreInterface for efficient reading of large data blocks Not checked yet
1 detail in Everything
edb-debugger 2007-08-20 now displays filling instructions in grey to clarify function boundaries
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-08-20 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-08-20
Displays functions with no real effect or used as padding (filling instructions) in grey text Not checked yet
1 detail in Everything
edb-debugger v2007-08-08 adds search filters to opcode and string plugins
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-08-08 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-08-08
search filter added to the opcode search plugin for region selection Not checked yet search filter added to the strings plugin for region selection Not checked yet
2 details in Everything
edb-debugger 2007-08-06 adds ASCII display in heap viewer and filtering in environment viewer
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-08-06 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-08-06
Added ascii string display in the heap viewer plugin's data column when a heap block contains an ASCII string. Not checked yet Added a filter to the environment viewer plugin to quickly find variables. Not checked yet
2 details in Everything
edb-debugger adds configurable command window program and binary fill options to CPU CPU The main general-purpose processor in a computer. It runs application instructions and coordinates work with memory and other hardware. context menu.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-08-01 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-08-01
edb-debugger adds FreeBSD PID enumeration and breakpoint management via CPU CPU The main general-purpose processor in a computer. It runs application instructions and coordinates work with memory and other hardware. view context menu
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-07-26 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-07-26
edb-debugger 2007-07-17 adds breakpoint type display and safe byte modification with ELF32 framework groundwork
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-07-17 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-07-17
Breakpoint dialog now displays the breakpoint type. Not checked yet Modifying bytes overlapping a breakpoint now prompts to continue (removing breakpoints) or abort, preventing silent state corruption. Not checked yet Initial framework introduced for supporting multiple binary types, retaining current ELF32 support. Not checked yet
3 details in Everything
edb-debugger 2007-07-12 adds smarter operand analysis and improved debug stability
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-07-12 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-07-12
operand analysis now distinguishes byte ptr, word ptr, and dword ptr expression types. Not checked yet
1 detail in Everything
edb-debugger now uses the edisassm disassembly engine for improved performance and extensibility
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-07-11 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-07-11
Replaces the previous disassembly engine with the new edisassm library. Not checked yet Removes AT&T assembly syntax support temporarily due to the engine switch. Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! AT&T syntax is no longer supported in disassembly views.
edb-debugger adds eflags condition flags to register view and finishes environment viewer plugin
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-07-06 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-07-06
edisassm is now nearly complete and ready for integration into the debugger core. Not checked yet Register view displays condition flags as a sub-item under eflags. Not checked yet
2 details in Everything
edb-debugger adds Edit bytes command to the QDisassembly viewer for inline modification
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-05-20 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-05-20
└──▷ HOW TO FIND IT
Modify instructions in place during a debugging session via the GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. .
📍 In the QDisassembly viewer pane, right-click the target instruction and select Edit bytes .
QDisassembly viewer now supports the new Edit bytes command to modify disassembled code directly. Not checked yet
1 detail in Everything
edb-debugger adds configurable fonts for register/disassembly views in the options dialog
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-04-30 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-04-30
└──▷ HOW TO FIND IT
Customize the appearance of register and disassembly panes via the GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. settings.
📍 Open Options dialog › set fonts for register view and disassembly view
register view and disassembly view fonts can now be configured from the Options dialog Not checked yet data view font defaults to the setting in the Options dialog Not checked yet
2 details in Everything
edb-debugger 2007-04-23 adds an Open Files plugin to list open files.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-04-23 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-04-23
└──▷ HOW TO FIND IT
Access the Open Files view via the GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. to inspect currently loaded resources.
📍 In the edb-debugger menu, select Plugins › Open Files
Began work on a new "Open Files" plugin which currently lists open files and will eventually show socket/pipe information Not checked yet
1 detail in Everything
edb-debugger 2007-04-15 adds heuristic for main symbol resolution and 64-bit build progress
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-04-15 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-04-15
Progress added towards supporting 64-bit builds. Not checked yet
1 detail in Everything
Adds conditional breakpoints support via breakpoint manager plugin
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-04-06 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-04-06
└──▷ HOW TO FIND IT
Stop execution only when a specific expression evaluates to true.
📍 Open the breakpoint manager plugin, add a new breakpoint, and enter an expression in the condition field.
Adds compile-time default directories and plugin discovery API
└──▷ GET THIS VERSION
copy
$ git clone --branch 2007-03-15 https://github.com/eteran/edb-debugger.git
$ git checkout 2007-03-15
Adds compile-time option to specify default directory strings Not checked yet Adds preliminary method for code to find a plugin based on the plugins name Not checked yet edb will now look in the current working directory as well as the path specified in the options for plugins Not checked yet
3 details in Everything
edb-debugger adds tooltip for long instructions, register-as-string display, and push/pop to stack context menu
└──▷ GET THIS VERSION
copy
$ git clone --branch 2006-12-16 https://github.com/eteran/edb-debugger.git
$ git checkout 2006-12-16
Adds a tooltip in the disassembly view showing all instruction bytes when instruction length exceeds display capacity Not checked yet Enables automatic display of ASCII strings next to registers when analysis detects a pointer to an ASCII string Not checked yet Adds push and pop operations directly to the stack context menu Not checked yet
3 details in Everything
edb-debugger adds REP step-over support and robust expression evaluation.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2006-11-30 https://github.com/eteran/edb-debugger.git
$ git checkout 2006-11-30
step over now handles REP prefixed operations Not checked yet
1 detail in Everything
edb-debugger 2006-11-28 adds configurable hex display width and 64-bit format support via context menu.
└──▷ GET THIS VERSION
copy
$ git clone --branch 2006-11-28 https://github.com/eteran/edb-debugger.git
$ git checkout 2006-11-28
Added ability to choose bytes per word and words per row in displays via the context menu Not checked yet
1 detail in Everything
edb-debugger 2006-11-27 adds getBinaryStringFromUser to debugger API and filename in title bar
└──▷ GET THIS VERSION
copy
$ git clone --branch 2006-11-27 https://github.com/eteran/edb-debugger.git
$ git checkout 2006-11-27
getBinaryStringFromUser is now available in the debugger API for retrieving user-provided binary strings. Not checked yet
1 detail in Everything
edb-debugger adds StringSearcher double-click follow and CheckVersion plugin for release checks
└──▷ GET THIS VERSION
copy
$ git clone --branch 2006-11-22 https://github.com/eteran/edb-debugger.git
$ git checkout 2006-11-22
double click in the dump view follows to StringSearcher plugin Not checked yet New CheckVersion plugin reads http://www.codef00.com/projects/debugger-latest to detect new releases Not checked yet
2 details in Everything
edb-debugger adds opcode pattern matching via OpcodeSearcher with double-click navigation
└──▷ GET THIS VERSION
copy
$ git clone --branch 2006-11-21 https://github.com/eteran/edb-debugger.git
$ git checkout 2006-11-21
Adds [esp + 8]->eip to OpcodeSearcher for new opcode pattern detection. Not checked yet Enables double-clicking results in OpcodeSearcher to jump the disassembly view to the found address. Not checked yet
2 details in Everything