No entries match these filters. Clear filters
lsof 4.99.7 adds JSON and JSON Lines output formats and displays UDP UDP A network protocol that sends individual messages without guaranteeing delivery or order. Applications trade built-in reliability for less overhead and can add their own recovery. connection state via -T.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.99.7 https://github.com/lsof-org/lsof.git
$ git checkout 4.99.7
└──▷ TRY IT
Inspect UDP socket connection states on Linux to identify sockets stuck in unexpected states.
Adds -J flag for JSON output wrapping process and file information in a structured envelope. Not checked yet Adds -j flag for JSON Lines output where each line is a JSON object representing a file descriptor. Not checked yet Enables UDP socket connection-state display on Linux via the existing -T option. Not checked yet
3 details in Everything
lsof 4.99.7 adds JSON and JSON Lines output formats and Linux UDP UDP A network protocol that sends individual messages without guaranteeing delivery or order. Applications trade built-in reliability for less overhead and can add their own recovery. connection-state display.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.99.7 https://github.com/lsof-org/lsof.git
$ git checkout 4.99.7
└──▷ TRY IT
Parse all open files for a process in a pipeline using jq — JSON Lines mode streams one object per FD without needing to parse a full JSON document.
copy
$ lsof -j -p 1234 | jq 'select(.type == "REG") | .name'
Capture a full structured snapshot of open files system-wide for offline analysis or ingestion into a SIEM SIEM Security information and event management, collecting logs from many systems and correlating events to find suspicious activity. Analysts use it to investigate alerts and incidents. .
copy
$ lsof -J > open_files_snapshot.json
Show UDP socket connection states on Linux to identify established vs. unconnected UDP flows during an incident.
Adds -J flag for structured JSON output, wrapping process and file descriptor information in a JSON envelope. Not checked yet Adds -j flag for JSON Lines output, emitting one JSON object per file descriptor — ideal for streaming pipelines. Not checked yet Enables UDP socket connection-state display on Linux via the existing -T option. Not checked yet
3 details in Everything
lsof 4.99.6 adds NETPOLICY FD parsing on Darwin, NFS ESTALE unlinked-file selection on Linux, and AIX filename capture.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.99.6 https://github.com/lsof-org/lsof.git
$ git checkout 4.99.6
Adds parsing and printing of NETPOLICY file descriptor type on Darwin. Not checked yet Treats NFS ESTALE file descriptors as unlinked on Linux, enabling them to be selected with the +L flag. Not checked yet Adds AIX platform-specific process_file() implementation with filename capture. Not checked yet File name is now properly saved in liblsof on Darwin. Not checked yet
4 details in Everything
lsof 4.99.1 adds --disable-liblsof configure option to omit liblsof installation.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.99.1 https://github.com/lsof-org/lsof.git
$ git checkout 4.99.1
First alpha release of liblsof for C library access, plus OpenBSD platform support
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.99.0 https://github.com/lsof-org/lsof.git
$ git checkout 4.99.0
Introduces an alpha version of liblsof, allowing users to access lsof functionality via C functions instead of spawning a subprocess and parsing output. Not checked yet Adds a new folder separating the OpenBSD dialect to support platforms that disallow kernel memory access, requiring a switch to user mode API. Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! On macOS, the /dev/kmem backend is removed and replaced with libproc, which may affect older macOS compatibility.
lsof 4.98.0 adds human-readable size display and root-only file listing security options
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.98.0 https://github.com/lsof-org/lsof.git
$ git checkout 4.98.0
Adds -H switch to print file sizes in human-readable format (e.g., 123.4K) Not checked yet Adds --enable-security configure option to restrict listing all open files to the root user only Not checked yet Adds --enable-no-sock-security configure option to allow listing socket files even when --enable-security is active Not checked yet
3 details in Everything
Adds an experimental Autotools-based build system for lsof
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.97.0 https://github.com/lsof-org/lsof.git
$ git checkout 4.97.0
└──▷ BREAKING ON UPGRADE
! Removes support for the decof/du/tru64 operating systems! Removes support for the openstep/nextstep operating systems
Adds -Q option to control exit status and improves startup performance on Linux via close_range(2) .
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.95.0 https://github.com/lsof-org/lsof.git
$ git checkout 4.95.0
Adds the -Q command-line flag to adjust lsof's exit status when no search items are found, allowing it to return 0 instead of the default 1. Not checked yet Uses the Linux close_range(2) syscall instead of repeated close() calls during startup, significantly reducing initialization time on kernels 5.9+. Not checked yet
2 details in Everything
lsof 4.94 adds -d fd pseudo-selector for all numeric fds, POSIX POSIX A family of standards for operating-system interfaces, including process, file and shell behavior. Software that uses these interfaces is easier to move between compatible systems. MQ support, +fg O_PATH/CLOEXEC/TMPF decoding, and -r c<N> stop limit
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.94.0 https://github.com/lsof-org/lsof.git
$ git checkout 4.94.0
└──▷ USE IT
Inspect all numeric file descriptors for the current process, ignoring special names like cwd or txt.
shell
copy
./lsof -p $$ -a -d fd
Limit a continuous monitoring loop to exactly 10 iterations to prevent runaway scripts.
Adds fd as a pseudo file descriptor name to the -d option to select all numbered file descriptors Not checked yet Adds c<N> specifier to the -r option to stop iteration when count reaches N Not checked yet Adds decoding of O_PATH flag in +fg option Not checked yet Adds decoding of O_CLOEXEC flag as CX in +fg option Not checked yet Adds decoding of O_TMPFILE flag as TMPF in +fg option Not checked yet
+6 more
show less
Adds Linux display of POSIX message queue endpoint information with +|-E option Not checked yet Enables printing connection state for unix domain sockets (LISTEN, UNCONNECTED, CONNECTING, CONNECTED, DISCONNECTING, UNKNOWN) Not checked yet Turns off unix domain socket state printing with the -T option Not checked yet Shows pid monitored by a pidfd in [pidfd:%d] format in output Not checked yet Enumerates fds monitored by an eventpoll fd in [eventpoll:<fd0>,<fd1>,...,<fdn>] format in output Not checked yet Makes -Fo option work for printing file offset for regular files Not checked yet
11 details in Everything
lsof 4.90 adds -K i flag to ignore tasks and enhances Linux pseudoterminal reporting
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.90 https://github.com/lsof-org/lsof.git
$ git checkout 4.90
Adds -K i flag to ignore tasks during file listing Not checked yet Enhances +|-E option for Linux pseudoterminal endpoint processing Not checked yet
2 details in Everything
lsof 4.88 adds +E option for Linux endpoint info and drops Solaris support
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.88 https://github.com/lsof-org/lsof.git
$ git checkout 4.88
Adds +E and -E options to display endpoint information on Linux. Not checked yet Adds support for FreeBSD 11, including tmpfs file system support. Not checked yet Adds protocol name support for Linux RDMA RDMA A networking technique that lets one machine read or write another machine's memory directly over a fabric like InfiniBand or RoCE, bypassing both CPUs and OS kernels, giving cyber tools near-zero-latency, high-throughput data transfer. and CRYPTO. Not checked yet
3 details in Everything
lsof 4.87 adds anonymous inode file system support, ICMP ICMP A network-layer protocol in the TCP/IP suite used by devices to send error messages and operational diagnostics, such as unreachable hosts or TTL expiry; cyber tools use it for host discovery and path tracing. socket reporting, and FreeBSD thread/Ki_numthreads detection.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.87 https://github.com/lsof-org/lsof.git
$ git checkout 4.87
Adds support for Linux anon_inodefs file systems to display files backed by anonymous inodes Not checked yet Adds support for FreeBSD builds using the clang compiler Not checked yet
2 details in Everything
lsof 4.86 adds support for Linux SCTP SCTP A transport-layer protocol (RFC 4960) maintained by the IETF that delivers messages with optional ordering and built-in multi-homing, giving cyber tools reliable framing without TCP's head-of-line blocking. sockets, FreeBSD 10, Mac OS X Lion, and fixes NFS duplicate device handling.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.86 https://github.com/lsof-org/lsof.git
$ git checkout 4.86
Adds SCTP socket file support to the lsof command line utility on Linux systems Not checked yet Enables detection of open files on FreeBSD 8.3 and FreeBSD 10 platforms Not checked yet Extends platform coverage to Mac OS X 10.7 (Lion) in the lsof build Not checked yet Improves accuracy for Linux NFS mounts by resolving issues with duplicate device numbers Not checked yet
4 details in Everything
└──▷ BREAKING ON UPGRADE
! AIX is no longer supported on any versions of that operating system.
lsof 4.85 adds Linux +|-e option to exempt file systems from blocking kernel calls and Netlink protocol support
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.85 https://github.com/lsof-org/lsof.git
$ git checkout 4.85
Adds the +|-e option for Linux to exempt file systems named by path from blocking stat(2) , lstat(2) or readlink(2) calls that might hang in the kernel. Not checked yet Adds support for Linux Netlink protocol, allowing lsof to display network sockets using this protocol. Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! FreeBSD 7.x is no longer supported.
lsof 4.84 adds -K flag for Linux task reporting and HASTASKS support.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.84 https://github.com/lsof-org/lsof.git
$ git checkout 4.84
1 detail in Everything
lsof 4.81 adds -c^ exclusion and -stcp|ud state filtering options for faster Internet file selection.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.81 https://github.com/lsof-org/lsof.git
$ git checkout 4.81
Adds -c^<command> option to lsof to exclude files owned by specified commands during scanning Not checked yet Adds -stcp|ud>:[state1,state2,...] or -stcp|ud>:^[state1,state2,...] options to filter Internet files by TCP TCP A network protocol that delivers a reliable, ordered stream of bytes between two endpoints. It detects lost data and retransmits it. /UDP UDP A network protocol that sends individual messages without guaranteeing delivery or order. Applications trade built-in reliability for less overhead and can add their own recovery. state (e.g., LISTEN, CLOSE_WAIT) Not checked yet Implements performance enhancements for socket file operations on Linux and PSTAT-based HP-UX Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! Reduces supported AIX versions; older than AIX 5.3 is no longer tested or supported! Relies on HASTCPUDPSTATE definition in dialect-specific machine.h header to enable new TCP/UDP state options
lsof 4.79 adds Linux /proc/<PID>/fdinfo support and repeat-mode strftime formatting
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.79 https://github.com/lsof-org/lsof.git
$ git checkout 4.79
LINUX_HASSELINUX environment variable added to unconditionally enable or inhibit SELinux SELinux A mandatory access control system built into the Linux kernel, maintained by the NSA and Red Hat, that enforces fine-grained policies restricting what processes can access, even if they run as root. support in lsof Not checked yet
1 detail in Everything
lsof 4.77 adds -X option for Solaris cached v_node paths and improved FreeBSD random seed generation.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.77 https://github.com/lsof-org/lsof.git
$ git checkout 4.77
Adds -X option support for Solaris 10 and above to report cached v_node path names for unlinked files followed by (deleted) Not checked yet Improves cached vnode path name accuracy by appending "(?)" to the end of questionable paths Not checked yet Adds command name length checking to as many dialects as possible (including Linux) for the -c option Not checked yet
3 details in Everything
lsof 4.76 adds partial listen queue length to -Tf and solaris port/ctfs support
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.76 https://github.com/lsof-org/lsof.git
$ git checkout 4.76
Adds partial listen queue length to socket options when using the -Tf flag. Not checked yet Adds support for Solaris 10 Port Files and CTFS files (incomplete inode/size/link count). Not checked yet Enables lsof to process Linux map file names containing embedded spaces. Not checked yet
3 details in Everything
lsof 4.75 adds negation to -g/-p, new -X option for Linux, and supports FreeBSD/NetBSD/AIX platforms
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.75 https://github.com/lsof-org/lsof.git
$ git checkout 4.75
Adds -X option on Linux to inhibit reading /proc/net/tcp* and /proc/net/udp* files Not checked yet Adds negation forms to -g (PGID) and -p (PID) list values for targeted exclusion Not checked yet Enables FreeBSD 5.4 support Not checked yet Enables NetBSD 2.99.12 support Not checked yet Enables IPv6 IPv6 The current version of the Internet Protocol, standardized by the IETF, using 128-bit addresses to replace the exhausted IPv4 space. Cyber tools target it because modern networks run dual-stack or IPv6-only. support for HP-UX > 11 Not checked yet
+1 more
show less
Adds support for SCO OSR 6.0.0 and UnixWare 7.1.4 Not checked yet
6 details in Everything
└──▷ BREAKING ON UPGRADE
! Drops claimed support for DEC OSF/1 and Digital UNIX (last tested revision was 4.74)! Drops support for OpenUNIX 8
Adds -x for symlink/ mount crossing, socket option reporting, and -z for Solaris 10 zones
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.71 https://github.com/lsof-org/lsof.git
$ git checkout 4.71
Added the -x [fl] cross-over option to enable +d and +D processing to cross over symbolic links and/or file system mount points. Not checked yet Added support for optional reporting of socket options, socket states and TCP TCP A network protocol that delivers a reliable, ordered stream of bytes between two endpoints. It detects lost data and retransmits it. flags for AIX, Darwin, BSDI, Digital UNIX/Tru64, FreeBSD, HP-UX, NetBSD, OpenBSD, OPENSTEP, OpenUNIX, SCO OpenServer, Solaris, and UnixWare. Not checked yet Added a -z [z] option to Solaris 10 lsof to enable listing of zone name and select processes/files from specified zones. Not checked yet
3 details in Everything
This release enhances cyber tooling portability and platform coverage for lsof 4.70 by adding IPv6 IPv6 The current version of the Internet Protocol, standardized by the IETF, using 128-bit addresses to replace the exhausted IPv4 space. Cyber tools target it because modern networks run dual-stack or IPv6-only. socket support on Linux and LFS visibility for NetBSD/OpenBSD.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.70 https://github.com/lsof-org/lsof.git
$ git checkout 4.70
Adds raw IPv6 support to the Linux build of lsof. Not checked yet Adds log-structured file system (LFS) support for NetBSD and OpenBSD. Not checked yet
2 details in Everything
lsof 4.68 adds preliminary SAM-FS support and upgrades EXT2FS/UFS for new inode structures.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.68 https://github.com/lsof-org/lsof.git
$ git checkout 4.68
Adds preliminary (and incomplete) SAM-FS file system support to Solaris lsof Not checked yet Upgrades EXT2FS and UFS support for NetBSD and OpenBSD to handle new inode information and fast UFS1/UFS2 file systems Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Disables AIX AFS support in the Configure script for AIX versions above 4.3.3.0 or AIX AFS versions above 3.5
lsof 4.67 adds +c <width> for COMMAND column width and kernel event queue support on FreeBSD/NetBSD/OpenBSD
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.67 https://github.com/lsof-org/lsof.git
$ git checkout 4.67
Adds the +c <width> CLI option to change the maximum output width of the COMMAND column, allowing values other than the default CMDL defined in lsof.h Not checked yet Adds kernel event queue file support for FreeBSD, NetBSD, and OpenBSD, enabling detection of files via the OS kernel's event queue mechanism Not checked yet
2 details in Everything
lsof 4.64 adds exclusion list to -d flag, nullfs support on BSDs, and Solaris 9 FCS/Solaris fd fs improvements
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.64 https://github.com/lsof-org/lsof.git
$ git checkout 4.64
Adds ^ prefix to the -d option to denote an exclusion list for file descriptors Not checked yet Adds nullfs support for FreeBSD, NetBSD, and OpenBSD Not checked yet Adds Solaris 9 FCS specific DNLC code and updates dnode.c for the so_so structure change Not checked yet Adds Solaris fd file system support Not checked yet
4 details in Everything
Adds HPUX_BOOTFILE environment variable and defense against stdio descriptor attack
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.63 https://github.com/lsof-org/lsof.git
$ git checkout 4.63
Adds the HPUX_BOOTFILE environment variable to control HP-UX kernel configuration detection during the Configure script run. Not checked yet Enables HP-UX 10.30 and 11.00 to report open NFS file link counts. Not checked yet Enables HP-UX 11.11 to stat(2) large files. Not checked yet
3 details in Everything
lsof 4.62 adds block node reporting outside /dev and new kernel symbol defaults for NetBSD/OpenBSD
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.62 https://github.com/lsof-org/lsof.git
$ git checkout 4.62
Changes NetBSD lsof source selection logic to prefer getbootfile(3) over /netbsd for kernel symbol resolution Not checked yet Changes OpenBSD lsof source selection logic to prefer /dev/ksyms over /bsd for kernel symbol resolution Not checked yet
2 details in Everything
Adds large file support for Linux and fixes NetBSD/OpenBSD build without system source.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.61 https://github.com/lsof-org/lsof.git
$ git checkout 4.61
Makes Linux lsof capable of handling and reporting file sizes greater than 32 bits. Not checked yet Modifies NetBSD and OpenBSD Configure stanzas so that lsof can be built when there is no system source tree (e.g., /usr/src/sys). Not checked yet
2 details in Everything
lsof 4.59 adds IPv6 IPv6 The current version of the Internet Protocol, standardized by the IETF, using 128-bit addresses to replace the exhausted IPv4 space. Cyber tools target it because modern networks run dual-stack or IPv6-only. selector to -i, raw hex device field r , and OpenUNIX 8 support.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.59 https://github.com/lsof-org/lsof.git
$ git checkout 4.59
Adds IP version selector to the -i option parameters. Not checked yet Adds new output field r for raw device number in hex (excluded from -F/-F0 output). Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Terminated lsof support for PTX PTX A low-level parallel thread execution ISA and virtual machine defined by NVIDIA, used as an intermediate representation for GPU code so tools can compile, inspect, or instrument GPU kernels without targeting specific hardware generations. .
lsof 4.58 adds new socket and OS type detections plus -C option for HP-UX PSTAT builds
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.58 https://github.com/lsof-org/lsof.git
$ git checkout 4.58
Adds detection of OSR Xenix Shared Data and Semaphore file types for OpenServer systems. Not checked yet Enables processing of the -C option for PSTAT-based HP-UX lsof builds. Not checked yet
2 details in Everything
lsof 4.57 adds locale support for character classification and URLs in help output.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.57 https://github.com/lsof-org/lsof.git
$ git checkout 4.57
Help (-h) and version (-v) output now include URLs to the lsof FAQ and man page Not checked yet
1 detail in Everything
Adds in-kernel UNIX socket support for UnixWare 7.1.1+ and TCP TCP A network protocol that delivers a reliable, ordered stream of bytes between two endpoints. It detects lost data and retransmits it. /IP info for HP-UX telnetd multiplexor
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.56 https://github.com/lsof-org/lsof.git
$ git checkout 4.56
Added support for UnixWare 7.1.1 and above in-kernel UNIX sockets Not checked yet
1 detail in Everything
lsof 4.55 adds support for deleted files in /proc/PID/maps and regex command name selection.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.55 https://github.com/lsof-org/lsof.git
$ git checkout 4.55
-c option now accepts a regular expression to select processes by command name. Not checked yet Support for files in /proc/<PID>/maps that have been deleted. Not checked yet
2 details in Everything
lsof 4.53 adds Apple Darwin / Mac OS X 1.2 port and new Configure handling for AIX j2_lock.h.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.53 https://github.com/lsof-org/lsof.git
$ git checkout 4.53
Added Apple Darwin / Mac OS X 1.2 platform support Not checked yet Added j2_lock.h to distribution with automatic detection during configuration Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Removed SunOS 4.1.x support! Removed Linux 2.0.x /dev/kmem support! Dropped claims of support for all UnixWare versions except 7.1.0! Dropped claims of support for all SCO OpenServer versions except 5.0.5
lsof 4.52 adds PSTAT-based HP-UX, AIX 5L, OpenBSD 2.8, and UnixWare 7.x support
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.52 https://github.com/lsof-org/lsof.git
$ git checkout 4.52
Adds PSTAT-based lsof for HP-UX 11 using the pstat(2) interface (sources in lsof_4.52/dialects/hpux/pstat) Not checked yet Adds Configure support for AIX 5L (Monterey/Itanium) via the aix abbreviation Not checked yet Adds Configure support for OpenBSD 2.8 Not checked yet Adds large file, CDFS, and DOSFS support for UnixWare 7.x Not checked yet Adds sockfs to the mount scan exemption list for /proc-based Linux lsof Not checked yet
+2 more
show less
Adds Tru64 5.x CFS support providing cached file attribute information Not checked yet Adds Solaris 9 text file support Not checked yet
7 details in Everything
└──▷ BREAKING ON UPGRADE
! Terminates support for Pyramid, SunOS 4.1.x, and Ultrix platforms
lsof 4.50 adds NetBSD alpha support, OpenBSD 2.7 configure handling, and Solaris VxFS QIO file support.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.50 https://github.com/lsof-org/lsof.git
$ git checkout 4.50
Adds NetBSD alpha test host support. Not checked yet Enables Configure script to handle OpenBSD 2.7. Not checked yet Adds support for Solaris VxFS QIO files. Not checked yet
3 details in Everything
lsof 4.49 adds OpenBSD UVM support, AIX >2GB memory handling, FreeBSD KAME IPv6 IPv6 The current version of the Internet Protocol, standardized by the IETF, using 128-bit addresses to replace the exhausted IPv4 space. Cyber tools target it because modern networks run dual-stack or IPv6-only. , and new HASPRIVPRIPP configure check.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.49 https://github.com/lsof-org/lsof.git
$ git checkout 4.49
Adds HASPRIVPRIPP configuration option to the Configure script for privilege checks. Not checked yet Adds support for OpenBSD UVM virtual memory in the build process. Not checked yet Enables KAME IPv6 support on FreeBSD via updated KAME support logic. Not checked yet Extends AIX compatibility to systems with more than 2GB of memory. Not checked yet
4 details in Everything
Adds -R and -F field output selector behavior and Solaris 8 mntfs support.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.47 https://github.com/lsof-org/lsof.git
$ git checkout 4.47
-FR field output specification now selects the optional PPID field without requiring a separate -R option Not checked yet Added support for the mnt file system (mntfs or /etc/mnttab) on Solaris 8 Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Scripts that parse all field output may require revision due to the change in -FR behavior.
lsof 4.46 adds Solaris 8 Beta/refresh support and libc5 /dev/kmem circumvention for Linux
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.46 https://github.com/lsof-org/lsof.git
$ git checkout 4.46
Adds a libc5 library /dev/kmem-based Linux lsof circumvention. Not checked yet Enables support for OpenBSD 2.6. Not checked yet Enables support for BSDI BSD/OS 4.1. Not checked yet Adds support for INRIA IPv6 IPv6 The current version of the Internet Protocol, standardized by the IETF, using 128-bit addresses to replace the exhausted IPv4 space. Cyber tools target it because modern networks run dual-stack or IPv6-only. to NetBSD. Not checked yet Added support for Solaris 8 Beta and Beta refresh. Not checked yet
5 details in Everything
Adds FILE-FLAG and link count output via new flags +f[G] and +L
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.43 https://github.com/lsof-org/lsof.git
$ git checkout 4.43
Added +f[gG] flag to include the FILE-FLAG column (open flags) in output. Not checked yet Added +L option to display and filter by file link counts. Not checked yet
2 details in Everything
lsof 4.41 adds LSOF_CINFO, LSOF_CC, and LSOF_CCV env vars for configure control and FreeBSD 3.1/4.0 support
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.41 https://github.com/lsof-org/lsof.git
$ git checkout 4.41
Adds LSOF_CINFO string to Configure to propagate a CINFO string into the lsof -v output via a #define LSOF_CINFO in version.h Not checked yet Adds LSOF_CC environment variable for configuring the compiler path during build Not checked yet Adds LSOF_CCV environment variable for specifying the compiler version during build Not checked yet
3 details in Everything
Adds +D and +d directory search options for lsof
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.40 https://github.com/lsof-org/lsof.git
$ git checkout 4.40
Adds +D <dir> option to search the entire directory tree including subdirectory branches Not checked yet Adds +d <dir> option to search only <dir> and its contents without descending into subdirectories Not checked yet Supports LINUX_BASE environment variable to force Linux Configure stanza to use /proc or /dev/kmem source base Not checked yet
3 details in Everything
lsof 4.35 adds configurable kernel identity check, Solaris UNIX socket details and HP-UX NFS3 support
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.35 https://github.com/lsof-org/lsof.git
$ git checkout 4.35
Adds HASKERNIDCK build-time option to control kernel identity checking, configurable via the Customize script Not checked yet Expands the NAME column for Solaris UNIX domain sockets with clone device path names, enabling search by this path Not checked yet Adds support for HP-UX NFS3 files and completes the 64-bit kernel port for HP-UX 11 Not checked yet
3 details in Everything
lsof 4.30 adds Linux Alpha support and new TIMEVAL_LSOF config for glibc evasion.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.30 https://github.com/lsof-org/lsof.git
$ git checkout 4.30
Adds TIMEVAL_LSOF global symbol (default timeval) to allow the /dev/kmem-based Linux lsof to set its private glibc timeval name Not checked yet Adds platform support for Alpha on the /dev/kmem-based Linux lsof Not checked yet
2 details in Everything
Adds repeat mode with +r and adds HP-UX 11.0 support
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.27 https://github.com/lsof-org/lsof.git
$ git checkout 4.27
Adds the +' prefix to the -r' option (i.e., +r) for conditional repeat mode that exits immediately if no open files are listed during a cycle. Not checked yet Adds support for HP-UX 11.0 platform. Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Removed support for RISC/os; its test system is no longer available.
lsof 4.26 adds +f/-f flags to control file system name argument interpretation
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.26 https://github.com/lsof-org/lsof.git
$ git checkout 4.26
Adds +f flag to force path arguments to be considered as file system names regardless of mount table matches Not checked yet Adds -f flag to force path arguments to be considered as simple files rather than file system names Not checked yet Improves -V message for files and file systems with no open files and adds reporting of /proc search failures Not checked yet
3 details in Everything
lsof 4.25 adds configurable decimal digit size argument to -o option for offset formatting control
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.25 https://github.com/lsof-org/lsof.git
$ git checkout 4.25
lsof 4.22 adds +|-M for portmapper info and extends +|- prefix to more options.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.22 https://github.com/lsof-org/lsof.git
$ git checkout 4.22
Adds + and - prefix support to most lsof options, allowing explicit enable (+) or disable (-) of flags like -b, -C, -n, -P. Not checked yet Adds +|-M option to control reporting of portmapper registration information in square brackets after TCP TCP A network protocol that delivers a reliable, ordered stream of bytes between two endpoints. It detects lost data and retransmits it. /UDP UDP A network protocol that sends individual messages without guaranteeing delivery or order. Applications trade built-in reliability for less overhead and can add their own recovery. port or service name. Not checked yet Changes -w option syntax to +|-w to match the new +|- prefix convention and stabilize compile-time behavior. Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! The -w option now requires a + or - prefix to explicitly set width suppression; relying on the bare -w default behavior may change if the default state shifts based on compile flags.
lsof 4.21 adds -R for PGID reporting, FreeBSD root directory support, and BSDI/Irix build enablements.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.21 https://github.com/lsof-org/lsof.git
$ git checkout 4.21
Enables FreeBSD root directory reporting for the output of lsof Not checked yet Allows configuring for BSDI BSD/OS 4.0 during the build process Not checked yet Supports replacing scoff_t with off64_t for IRIX 5.3 systems with NFS kernel patch 1477 Not checked yet
3 details in Everything
Adds support for Reliant UNIX Mesh IPC IPC Inter-process communication, ways for separate programs to exchange data or signals. Examples include pipes, sockets and shared memory. files and AdvFS path lookups in Digital UNIX.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.20 https://github.com/lsof-org/lsof.git
$ git checkout 4.20
lsof 4.18 adds dynamic print columns and 64-bit file size/offset support
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.18 https://github.com/lsof-org/lsof.git
$ git checkout 4.18
Added Configure recognition for OpenBSD 2.2 platform support Not checked yet Added special types and print specification modifiers for file size and offset to handle UNIX dialects with 64 bit sizes and offsets Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Output format changes: lines are generally shorter, less blank space between columns, and no spaces between device number elements (only commas) due to dynamic print columns.
Adds -V option for verbose search result reporting in lsof 4.17
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.17 https://github.com/lsof-org/lsof.git
$ git checkout 4.17
lsof 4.16 adds -T flag to display TCP TCP A network protocol that delivers a reliable, ordered stream of bytes between two endpoints. It detects lost data and retransmits it. /TPI queue lengths and window sizes in the NAME column
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.16 https://github.com/lsof-org/lsof.git
$ git checkout 4.16
Adds -T option to select or de-select TCP/TPI info reporting in output Not checked yet Includes scripts/identd.perl5, a Perl 5 identd server implementation using lsof Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Service name arguments with embedded minus signs at the start of a range are no longer supported due to processor update
lsof 4.15 adds Solaris VxFS configuration, socket state TCO/TPI support
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.15 https://github.com/lsof-org/lsof.git
$ git checkout 4.15
Added improved Solaris VxFS configuration and handling Not checked yet Added socket state -- TCO or TPI -- for socket files Not checked yet
2 details in Everything
lsof 4.12 adds conditional Pyramid OBJFS support and enhances the Configure script for cross-configuration.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.12 https://github.com/lsof-org/lsof.git
$ git checkout 4.12
Adds a new documentation file 00XCONFIG that describes the process for cross-configuration of lsof. Not checked yet Enhances the Configure script to enable cross-configuration of lsof, based on suggestions from Marty Leisner. Not checked yet
2 details in Everything
lsof 4.09 adds new kernel name cache module rnmh.c to read BSD-form hashed entries
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.09 https://github.com/lsof-org/lsof.git
$ git checkout 4.09
Adds OpenBSD EXT2FS support and activates /kern filesystem detection for NetBSD in lsof 4.07
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.07 https://github.com/lsof-org/lsof.git
$ git checkout 4.07
Configure now detects and enables /kern file system support for NetBSD when kern_target structure is found. Not checked yet Adds OpenBSD platform support for scanning EXT2FS file systems. Not checked yet
2 details in Everything
lsof 4.03 introduces build-time configuration via WARNINGSTATE and expands platform support for HP-UX, SCO, PTX PTX A low-level parallel thread execution ISA and virtual machine defined by NVIDIA, used as an intermediate representation for GPU code so tools can compile, inspect, or instrument GPU kernels without targeting specific hardware generations. 4.4, and VxFS.
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.03 https://github.com/lsof-org/lsof.git
$ git checkout 4.03
Added WARNINGSTATE define support to machine.h and the Customize script, allowing the builder to set the default state for warning message issuance. Not checked yet
1 detail in Everything
lsof 4.02 adds AX.25 support and eases -i protocol lookup requirements
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.02 https://github.com/lsof-org/lsof.git
$ git checkout 4.02
Added rudimentary AX.25 network layer support for lsof Not checked yet Eased the requirement that service name lookup for the -i option be accompanied by a protocol name when TCP TCP A network protocol that delivers a reliable, ordered stream of bytes between two endpoints. It detects lost data and retransmits it. and UDP UDP A network protocol that sends individual messages without guaranteeing delivery or order. Applications trade built-in reliability for less overhead and can add their own recovery. names yield the same port Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! HP-UX CCIT support disabled in lsof for HP-UX versions 10 and above
lsof 4.01 adds TFS support for Pyramid dialects
└──▷ GET THIS VERSION
copy
$ git clone --branch 4.01 https://github.com/lsof-org/lsof.git
$ git checkout 4.01