No entries match these filters. Clear filters
Unleashed Firmware adds a Remote Analyzer app, Nero Radio and Freezer decoding, a T5577 T5577 A reprogrammable RFID chip commonly used in 125 kHz proximity cards, widely supported by researchers because it can emulate many legacy card formats for access-control testing. app with Sniff Password, and new SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocols for FAAC TM and KeeLoq KeeLoq A proprietary block cipher developed by Microchip Technology, used in rolling-code systems for keyless entry devices; cyber tools target it to analyze or attack RF-based access control protocols. Phantom/Hilan︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-095 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-095
└──▷ TRY IT
Send a specific infrared signal from a universal remote database over the CLI without triggering a device reboot.
copy
$ ir universal <remote> <signal>
Send infrared signals over the CLI with ir universal <remote> <signal> without rebooting the device.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Adds the Remote Analyzer app, which detects garage and gate remotes that SubGHz does not yet decode (showing their type and details), detects Life Fido remotes and Crypt /Crypt Lite encrypted remotes, and includes Mod. sweep, which walks modulations one second at a time while a remote transmits and locks onto the one that works. Not checked yet Adds a T5577 app that reads a T5577 tag, saves it to /ext/lfrfid, and writes it back, with Sniff Password to recover a tag password by listening to a reader or cloner write a tag and keep found passwords in a personal dictionary. Not checked yet Exports the T5577 block read/write API for apps via t5577.h and t5577_file.h, plus faac_slh_reset_prog_mode, subghz_protocol_decoder_base_get_type, ibutton_protocols_is_writable, and bit_lib_reverse_32_fast. Not checked yet Adds decoding and replay support for several new remote protocols: KeeLoq Phantom/Hiland (now reads and sends properly, available as KL: Phantom/Hiland 433M in Add Manually, with CounterMode: 10 sending the resync pair 0xFFFE then 0xFFFF in one press as a clone remote), FAAC TM 12 dip-switch TM 433/868 DS remotes (available as FAAC TM 433MHz and FAAC TM 868MHz in Add Manually), Nero Radio rolling remotes, Freezer remotes, and Proteco MOVER remotes (with custom buttons). Not checked yet
+5 more
show less
Nice O-Code app can now decode a saved RAW .sub file and shows the certificate beside the installer code, and supports the longer 72-bit frame as Nice O-Code One 433MHz and 112-bit certificate frames as Nice O-Code+Crt 433MHz in Add Manually. Not checked yet Nice O-Code — New remote mints a serial the gate is certain to enrol. Not checked yet Seed Capturer can decode a saved RAW .sub file and supports BFT Mitto remotes on 433.92 MHz, using an external CC1101 module. Not checked yet Dooya remotes now support custom buttons. Not checked yet KeeLoq remotes that send at half the usual rate (Te 200us) are now decoded and sent back at the rate they were received, shown as Crypt Key instead of an unknown manufacturer. Not checked yet
Send infrared signals over the CLI with ir universal <remote> <signal> without rebooting the device.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Adds the Remote Analyzer app, which detects garage and gate remotes that SubGHz does not yet decode (showing their type and details), detects Life Fido remotes and Crypt /Crypt Lite encrypted remotes, and includes Mod. sweep, which walks modulations one second at a time while a remote transmits and locks onto the one that works. Not checked yet Adds a T5577 app that reads a T5577 tag, saves it to /ext/lfrfid, and writes it back, with Sniff Password to recover a tag password by listening to a reader or cloner write a tag and keep found passwords in a personal dictionary. Not checked yet Exports the T5577 block read/write API for apps via t5577.h and t5577_file.h, plus faac_slh_reset_prog_mode, subghz_protocol_decoder_base_get_type, ibutton_protocols_is_writable, and bit_lib_reverse_32_fast. Not checked yet Adds decoding and replay support for several new remote protocols: KeeLoq Phantom/Hiland (now reads and sends properly, available as KL: Phantom/Hiland 433M in Add Manually, with CounterMode: 10 sending the resync pair 0xFFFE then 0xFFFF in one press as a clone remote), FAAC TM 12 dip-switch TM 433/868 DS remotes (available as FAAC TM 433MHz and FAAC TM 868MHz in Add Manually), Nero Radio rolling remotes, Freezer remotes, and Proteco MOVER remotes (with custom buttons). Not checked yet
+1 more
show less
Nice O-Code — New remote mints a serial the gate is certain to enrol. Not checked yet
4 more in Everything
└──▷ BREAKING ON UPGRADE
!
KeeLoq `CounterMode: 7` now sends what `CounterMode: 8` previously sent; the old `CounterMode: 7` resync pack is now mode 8, and the previous mode 8 is now mode 9.
Our best guess
unlshd-094 adds targeted write lists for iButton/RFID, 10+ new SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocols, Texkom NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. emulation, Seed Capturer app, and two new menu styles.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-094 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-094
Adds Settings -> Write Blanks list in the iButton app letting users enable/disable individual blank targets (RW1990.1, RW1990.2, TM2004, TM01x) so a write only attempts the selected types; choice is saved and honoured by the iButton CLI.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Adds Settings -> Write Chips list in the 125 kHz RFID app letting users enable/disable individual chip targets (T5577 T5577 A reprogrammable RFID chip commonly used in 125 kHz proximity cards, widely supported by researchers because it can emulate many legacy card formats for access-control testing. , EM4305, Hitag micro / ID82xx variants 8265, 8210, H5.5) so a write skips unselected chips; choice is saved and honoured by the rfid CLI. Not checked yet Adds ID82xx (F8268, 8211 and relatives) china clone Hitag S chip as an EM4100 write target in the 125 kHz RFID app and rfid CLI; disabled by default — enable via Settings -> Write Chips (8268 ) to use. Not checked yet Adds Manufacture: Genius field to .sub files (alongside Seed:) enabling proper read and resend of Genius remotes; Genius 433MHz and Genius 868MHz added to Add Manually. Not checked yet Adds new SubGHz app Seed Capturer (under Apps -> Sub-GHz) that collects Fix + Hop pairs from FAAC SLH, Genius, or Erreka remotes for offline seed recovery, saving up to 10 captures to /ext/apps_data/subghz_seed_captures. Not checked yet
+5 more
show less
Adds RPC Storage range-read capability: a read request now accepts an offset and size so a companion app can fetch a partial file instead of the entire file. Not checked yet Adds Texkom (Техком) NFC key read and emulation for TK13, TK15, TK17 and MMBIT variants at 13.56 MHz; TK13, TK17 and MMBIT are also available in Add Manually. Not checked yet Adds two new main menu styles Macintosh and 3D, selectable under Settings -> Desktop -> Menu Style. Not checked yet Adds RFID 'Add Manually by facility code and card number' flow: formats including EM4100, HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. H10301, HID H10302/H10304/H10306, AMAG S10401, Corporate 1000 35-bit, ioProx XSF, AWID, Pyramid 26-bit, Gallagher, and Casi-Rusco C10106 can be entered as FC/ID rather than hex. Not checked yet Adds read support for HID H10302, H10304, H10306, AMAG S10401, and Corporate 1000 35-bit HIDProx cards, displaying FC and card number on read and saved-card screens. Not checked yet
10 details in Everything
└──▷ BREAKING ON UPGRADE
! The FeliCa FeliCa A contactless smart card standard developed by Sony, widely used in Japanese transit and payment systems, operating at 13.56 MHz with its own proprietary protocol distinct from ISO 14443. file format is now at version 4; a file saved by an earlier build holds the root area key version on its system line — that value is no longer read back as the system key version and the field shows as unknown until the card is re-read.
Unleashed unlshd-093 adds Nice O-Code and Security+ 2.0 keypad support, new menu styles, and IR signal saving from Universal Remote.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-093 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-093
Adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Nice O-Code protocol support (52, 72 bits, Dynamic) — decode, save, and emulate — plus a new Nice O-Code app that recovers the installer code from 4+ captures.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Adds SubGHz Security+ 2.0 keypad support (86 bits, Dynamic) — decode, save, and emulate keypad frames — plus a new Security+ PIN app to test and change the keypad PIN in file. Not checked yet Adds SubGHz Superrollo (GW60) roller-shutter protocol (KeeLoq KeeLoq A proprietary block cipher developed by Microchip Technology, used in rolling-code systems for keyless entry devices; cyber tools target it to analyze or attack RF-based access control protocols. HCS361, 67-bit rolling code with CRC, including Add Manually support). Not checked yet Adds new KeeLoq manufacturers: JCM Tech Gen2, Stagnoli, Telcoma, SEA, and two additional Wisniowski variants. Not checked yet Adds a second page to the Desktop up-button menu, accessible via left/right, with screen brightness, volume, and vibro controls. Not checked yet
+3 more
show less
Adds Settings -> Desktop -> Menu Style to choose from Default, PS4, Wii, DSi, C64, Compact, CoverFlow, Vertical, and Grid main menu layouts, each shipped as its own plugin. Not checked yet Adds the ability to save a working signal straight from the Infrared Universal Remote — pause brute force and press down to keep the signal as a new remote or append it to an existing one. Not checked yet Adds a Save Keys to Dictionary action on NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. read or saved MIFARE Classic MIFARE Classic A family of contactless smart card chips made by NXP, widely used in access control and transit systems, whose weak proprietary encryption makes it a frequent target for RFID analysis and cloning tools. cards, making keys found by any attack available to future reads and to NFC Magic. Not checked yet
Adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Nice O-Code protocol support (52, 72 bits, Dynamic) — decode, save, and emulate — plus a new Nice O-Code app that recovers the installer code from 4+ captures.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Adds SubGHz Security+ 2.0 keypad support (86 bits, Dynamic) — decode, save, and emulate keypad frames — plus a new Security+ PIN app to test and change the keypad PIN in file. Not checked yet Adds SubGHz Superrollo (GW60) roller-shutter protocol (KeeLoq KeeLoq A proprietary block cipher developed by Microchip Technology, used in rolling-code systems for keyless entry devices; cyber tools target it to analyze or attack RF-based access control protocols. HCS361, 67-bit rolling code with CRC, including Add Manually support). Not checked yet Adds Settings -> Desktop -> Menu Style to choose from Default, PS4, Wii, DSi, C64, Compact, CoverFlow, Vertical, and Grid main menu layouts, each shipped as its own plugin. Not checked yet Adds the ability to save a working signal straight from the Infrared Universal Remote — pause brute force and press down to keep the signal as a new remote or append it to an existing one. Not checked yet
+1 more
show less
Adds a Save Keys to Dictionary action on NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. read or saved MIFARE Classic MIFARE Classic A family of contactless smart card chips made by NXP, widely used in access control and transit systems, whose weak proprietary encryption makes it a frequent target for RFID analysis and cloning tools. cards, making keys found by any attack available to future reads and to NFC Magic. Not checked yet
2 more in Everything
Unleashed Firmware unlshd-092 adds app categories, pluginized NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. scenes, and loading animation for .fap files
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-092 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-092
Adds categories for apps in firmware builds to organize apps moved to new subfolders. Not checked yet Moves NFC protocol scenes into their own plugins , reducing resident RAM RAM Working memory that holds programs and data while a computer is running. Its contents usually disappear when power is removed. usage by roughly half. Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Apps that were moved to new subfolders in favourites or on quick buttons must be re-added to favs/buttons.
Unleashed Firmware unlshd-091 adds Native MIFARE Ultralight AES AES A symmetric block cipher standardized by NIST that encrypts data in 128-bit blocks using 128-, 192-, or 256-bit keys; tools use it because hardware acceleration makes it fast enough for bulk encryption. and MIFARE Ultralight C MIFARE Ultralight C A low-cost NXP contactless smart card IC using ISO 14443-A at 13.56 MHz, adding 3DES authentication over the original Ultralight; tools use it to read, clone, or audit access-control tokens built on this chip. support, moves JS Runner to external app, updates API to 88.3.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-091 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-091
Adds native support for MIFARE Ultralight AES (MF0AES20) cards in NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. reader/writer Not checked yet Enables creation of blank MIFARE Ultralight AES cards from Add Manually Not checked yet Enables creation of blank MIFARE Ultralight C cards from Add Manually Not checked yet Moves JS Runner out of the core firmware into an external app (apps/assets/js_app.fap) Not checked yet Changes js CLI command to a CLI plugin Not checked yet
+2 more
show less
Updates Current API version to 88.3 Not checked yet Adds documentation on how to build FAPs on Android with Termux Not checked yet
7 details in Everything
Unleashed Firmware unlshd-090 adds MIFARE Plus native support via SL3, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Magic 2.0 app, Telcoma protocol, and Network/GPS RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. services
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-090 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-090
└──▷ HOW TO FIND IT
Enable full read/write/emulation for MIFARE Plus cards using the new native SL3 support, bypassing detection-only limitations.
📍 NFC › MIFARE Plus (SL3)
Use the updated LFRFID subsystem to wipe a T5577 T5577 A reprogrammable RFID chip commonly used in 125 kHz proximity cards, widely supported by researchers because it can emulate many legacy card formats for access-control testing. tag and verify the blank state.
📍 LFRFID › Wipe T5577
Access the new network and GPS RPC services for remote device management via the Flipper mobile app or CLI.
📍 RPC › Network/GPS
Adds Native MIFARE Plus support in SL3 to the NFC subsystem, enabling full read/write/emulation capabilities for MIFARE Plus cards instead of detection-only. Not checked yet Adds NFC Magic 2.0 app which provides write, clone, and wipe functionality for Ultralight/NTAG formats (USCUID-UL) with transport auto-selection and partial write resume. Not checked yet Adds support for the Telcoma/Cardin EDGE protocol (32bit, Static) within the SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. RF front-end. Not checked yet Adds support for Hitag Micro chips (8265/8210/H5.5) in the LFRFID subsystem. Not checked yet Adds Network and GPS RPC services to enable remote control of network connectivity and location data via the RPC interface. Not checked yet
+3 more
show less
Adds Standard card emulation support for NFC FeliCa FeliCa A contactless smart card standard developed by Sony, widely used in Japanese transit and payment systems, operating at 13.56 MHz with its own proprietary protocol distinct from ISO 14443. protocols. Not checked yet Adds Wipe T5577 capability with reset-to-blank and read-back verification in the LFRFID subsystem. Not checked yet Replaces the built-in clock app with NightStand Clock, featuring overnight display, brightness control, nightlight, and locale-aware alarms saved to /ext/apps_data/clock/. Not checked yet
8 details in Everything
Unleashed Firmware unlshd-088 adds GPS config and Nearby Files base pack
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-088 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-088
Nearby Files moved to the Base app pack. Not checked yet Adds option to set baudrate for connected GPS module. Not checked yet Enables adding or updating GPS position metadata in existing SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. , NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. , RFID, and iButton files. Not checked yet
3 details in Everything
Unleashed Firmware unlshd-087 adds dozens of new SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocols, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. write support for ISO15693 and Mifare Ultralight C, plus two new public API functions.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-087 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-087
└──▷ HOW TO FIND IT
Capture and replay or analyze the new Allstar Firefly 318ALD31K signal.
📍 SubGHz › Protocol › Custom › Load Allstar Firefly 318ALD31K
Enable NFC app to write data to ISO15693-3 cards.
📍 NFC › Advanced › ISO15693 › Write
Adds 42+ Keeloq based systems support in SubGHz Not checked yet Adds Allstar Firefly 318ALD31K protocol (18 bits, Static) to SubGHz Not checked yet Adds Nord ICE protocol (33 bits, Static) to SubGHz Not checked yet Adds support for CAME TOP44FGN in CAME TWEE protocol Not checked yet Adds ISO15693-3 and SLIX write-back support to NFC Not checked yet
+2 more
show less
Adds new parsers SZPPK, SKPPK and SevPPK to NFC Not checked yet Adds canvas_get_buffer and canvas_get_buffer_size to public API Not checked yet
7 details in Everything
Unleashed Firmware unlshd-086 adds Ditec GOL4 and KeyFinder SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocols, Indala 224-bit LFRFID support, and makes view_port_send_to_back public.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-086 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-086
Adds support for the Ditec GOL4 54bit dynamic protocol in SubGHz (with programming mode, button switch, and manual add). Not checked yet Adds support for the KeyFinder 24bit static protocol in SubGHz. Not checked yet Adds manual add and button switch support for Somfy Keytis in SubGHz. Not checked yet Adds Indala 224-bit (long format) protocol support to LFRFID. Not checked yet
4 details in Everything
Unleashed Firmware unlshd-085 adds Cardin S449 and Beninca ARC AES128 SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. support, remote simulation, TX Power control, and IR to the JS engine.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-085 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-085
Adds Cardin S449 protocol full support for SubGHz with Add manually and all button codes. Not checked yet Adds Beninca ARC AES128 protocol full support for SubGHz with Add manually and 3 button codes. Not checked yet Adds FSK12K modulation to read remotes (e.g., Cardin S449). Not checked yet Adds Treadmill37 protocol support for SubGHz. Not checked yet Adds Jarolift protocol full support for SubGHz with Add manually and all button codes. Not checked yet
+18 more
show less
Adds new modulation FSK with 12KHz deviation . Not checked yet Adds KingGates Stylo 4k support with Add manually and button switch. Not checked yet Adds Stilmatic (R-Tech) 12bit discriminator fix and button 9 support. Not checked yet Adds refactored counter editor for SubGHz signals. Not checked yet Adds speedup for Alutech AT-4N and Nice Flor S in SubGHz. Not checked yet Updates Sommer fm2 Add manually to use FM12K modulation. Not checked yet Adds support for last button code 0x6 on Sommer remotes (mapped to arrow keys). Not checked yet Adds two counter mode support for V2 Phoenix (Phox). Not checked yet Adds 390MHz and 430.5MHz to the default SubGHz hopper list. Not checked yet Adds decrypted hop display in Hop field for KeeLoq KeeLoq A proprietary block cipher developed by Microchip Technology, used in rolling-code systems for keyless entry devices; cyber tools target it to analyze or attack RF-based access control protocols. protocols. Not checked yet Enables decoding BFT KeeLoq with zero seed. Not checked yet Displays BFT programming mode TX in KeeLoq when arrow button is held. Not checked yet Adds counter mode 7 for KeeLoq (sends 7 signals increasing counter with 0x3333 steps). Not checked yet Enables remote simulation via signals button editor (full signal transmit with one click). Not checked yet Adds TX Power setting control. Not checked yet Changes Desktop lock menu to use BT ON/OFF instead of Lock/Unlock action. Not checked yet Allows opening power settings via left button when holding back button to power off. Not checked yet Adds IR capabilities to the JS engine. Not checked yet
23 details in Everything
Unleashed Firmware unlshd-084 adds experimental SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. counter modes and UI, Saflok MFUL parser support, and NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. performance improvements
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-084 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-084
SubGHz: Adds Counter Edit option with UI for manual counter modification (requires Debug mode) Not checked yet SubGHz: Adds UI for Counter Experimental Mode to switch counter behavior (requires Debug mode) Not checked yet SubGHz: Adds support for Keeloq, CAME Atomo, Nice Flor S, and AlutechAT4N Counter modes Not checked yet SubGHz: Adds new experimental counter overflow mode (OFEX) which resets counter values on overflow Not checked yet SubGHz: Adds default remote and clear slot features for SubGHz Remote Not checked yet
+3 more
show less
NFC: Adds MFUL counters to the Info page Not checked yet NFC: MFKey 4.0 and MIFARE Classic MIFARE Classic A family of contactless smart card chips made by NXP, widely used in access control and transit systems, whose weak proprietary encryption makes it a frequent target for RFID analysis and cloning tools. Static Encrypted Nested attacks now run 10x faster Not checked yet Apps : Enables use of keys found in key cache for NFC Nested attacks without clearing the cache first Not checked yet
8 details in Everything
Unleashed Firmware unlshd-083 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocol decoders, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. MFC key management, FeliCa FeliCa A contactless smart card standard developed by Sony, widely used in Japanese transit and payment systems, operating at 13.56 MHz with its own proprietary protocol distinct from ISO 14443. dump improvements, and CLI commands
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-083 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-083
Adds support for Came Atomo (TOP44RBN) remotes in SubGHz mode. Not checked yet Adds Elplast 18bit static code protocol to the SubGHz decoder list. Not checked yet Enables on-the-fly decoding of BFT (2-button remotes) in regular Read mode without external tools. Not checked yet Improves Linear and Dickert MAHS protocol decoders with better EZCode support. Not checked yet Adds ZKTeco 430.5 MHz manual entry capability for SubGHz. Not checked yet
5 details in Everything
Unleashed Firmware unlshd-082 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocol support (V2 Phoenix, Keeloq variants), NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Type 4 tags, TM01x iButton write, and GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. API extensions.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-082 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-082
Adds SubGHz: Roger (static 28 bit) protocol support with manual add capability Not checked yet Adds SubGHz: V2 Phoenix full support including button switch, manual add, and counter decrypt/encrypt Not checked yet Adds SubGHz: Keeloq support for Motorline, Rosh, Pecinin, Rossi, Merlin, Steelmate with manual add Not checked yet Adds SubGHz: Marantec protocol with CRC verification display and manual add support Not checked yet Adds SubGHz: Keeloq IronLogic (aka IL100) smart clone remote copiers support Not checked yet
+10 more
show less
Adds SubGHz: Comunello Keeloq manual add support Not checked yet Extends Alarms, Sensors, Cars ignore options in SubGHz with Hollarm, GangQi, Kia, Starline, ScherKhan, Magellan, Honeywell, Legrand, Feron parsers Not checked yet Adds NFC Type 4 tag support (NDEF on NTAG4xx / MIFARE DESFire) including NTAG413 DNA and NTAG424 DNA detection Not checked yet Adds NFC NXP Native Commands refactor sharing between MIFARE DESFire, MIFARE Plus, and NTAG4xx protocols Not checked yet Expands ISO14443-4A API with listener (emulation) support for sending responses to reader Not checked yet Exposes ISO14443-3A listener , ISO15693-3 device/poller/listener APIs for application use Not checked yet Adds MIFARE DESFire poller API ability to switch between native and ISO7816-wrapped commands Not checked yet Adds Ventra ULEV1, CSC Service Works, Philips Sonicare, SmartRider NFC tag parsers Not checked yet Adds submenu_remove_item() function to the GUI API Not checked yet Adds is_connected API for Expansion modules Not checked yet
15 details in Everything
└──▷ BREAKING ON UPGRADE
! The NFC CLI was removed with refactoring (will be back soon)
Unleashed Firmware unlshd-081 adds Feron/Prastel protocols, CLI autocomplete, BadUSB mouse/key combos, and new settings
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-081 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-081
Adds Feron protocol (static 32 bit) full support for SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. transmission Not checked yet Adds Revers RB2 / RB2M Protocol (static 64 bit) support with manual addition in SubGHz Not checked yet Adds Prastel (42bit static code) support for SubGHz Not checked yet Adds Came Atomo button hold simulation for full cycle pairing in SubGHz Not checked yet Adds LCD Color Inversion option under Settings - LCD and Notifications - LCD Inversion Not checked yet
+13 more
show less
Adds Night Shift Feature to dim backlight in a selected time interval via Display settings Not checked yet Combines RGB Backlight mod with original backlight support (including Rainbow/Wave effect) enabled via Notifications settings Not checked yet Enables FindMyFlipper as a system app with autostart on boot Not checked yet Adds BadUSB: Mouse control capability for BadUSB payloads Not checked yet Enables BadUSB arbitrary key combinations Not checked yet Adds Universal IR signal selection feature Not checked yet Adds EM4305 support to LFRFID module Not checked yet NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. app can now launch MFKey32 Not checked yet Adds Pinning of settings options in the UI Not checked yet Sets default UL/UL-C pwd/key for NFC key input Not checked yet Adds option to limit battery charging level (suppress charging) under Power settings Not checked yet Adds Vibro on Button press option under Input settings Not checked yet Introduces new CLI architecture with autocomplete and other enhancements Not checked yet
18 details in Everything
└──▷ BREAKING ON UPGRADE
! Desktop (fav apps) and LCD & Notifications settings are reset to default values due to config struct changes; they must be configured again after installation.
Unleashed Firmware unlshd-080 adds Jolly Motors SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. support, auto power-off timer, and new API functions for apps.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-080 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-080
Adds Jolly Motors device support to SubGHz reception (requires manual addition). Not checked yet Adds Power: Auto Power Off Timer feature to reduce battery drain when idle. Not checked yet Adds ability to send an Infrared signal once via RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. in the Official Firmware. Not checked yet Increases the maximum carrier limit for the Infrared transmitter. Not checked yet Adds new API functions flipper_format_write_empty_line(...) for data formatting. Not checked yet
+1 more
show less
Exposes FuriThread stdin access via a new API surface. Not checked yet
6 details in Everything
Unleashed Firmware unlshd-079 adds Monarch and Princeton 8bit SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocols, i2c/SPI SPI Serial Peripheral Interface, a synchronous communication bus standard used to connect microcontrollers to sensors, flash memory, and other peripherals at short range; cyber tools use it to read or write firmware on embedded devices. JS modules, BadUSB PIN on boot, and more NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. parsers.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-079 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-079
Keeloq: Monarch full support with add manually option Not checked yet Princeton protocol support for second button encoding type (8bit) Not checked yet Hollarm protocol adds more button codes Not checked yet NFC emulator parses H World Hotel Chain Room Key format Not checked yet NFC emulator parses Tianjin Railway Transit format Not checked yet
+3 more
show less
NFC emulator parses Moscow social card format Not checked yet NFC emulator parses Caltrain zones for Clipper format Not checked yet New i2c & SPI JS modules for extension board control Not checked yet
8 details in Everything
└──▷ BREAKING ON UPGRADE
! dialog, keyboard, and submenu JS modules removed; replaced by gui/dialog, gui/text_input, and gui/submenu respectively! badusb.setup() parameters mfr_name, prod_name, layout_path renamed to mfrName, prodName, layoutPath! math.is_equal() renamed to isEqual() ! storage module overhauled: use openFile() with modes instead of previous methods! textbox module removed; replaced by gui/text_box! Global __filepath and __dirpath renamed to __filename and __dirname! Global to_string() , to_upper_case() , and to_lower_case() moved to string class as .toString() , .toUpperCase() , and .toLowerCase()
Unleashed Firmware unlshd-078 adds Marantec24, GangQi, and Hollarm SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocols
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-078 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-078
SubGhz: Add support for Marantec24 (static 24 bit), GangQi (static 34 bit), and Hollarm (static 42 bit) protocols with button parsing Not checked yet SubGhz: Add support for Hay21 (dynamic 21 bit) protocol with button parsing Not checked yet SubGhz: Add Princeton custom buttons support (0x1, 0x2, 0x4, 0x8, 0xF) Not checked yet NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. : Add Saflok parser improvements Not checked yet Infrared: Add Airwell AW-HKD012-N91 to universal AC remote library Not checked yet
5 details in Everything
Unleashed Firmware unlshd-077 adds Dickert MAHS SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocol support and LFRFID GProxII compatibility
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-077 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-077
Adds Dickert MAHS garage door remote control protocol support for SubGHz transmission Not checked yet Adds lfrfid GProxII support for 125kHz RFID reading and writing Not checked yet
2 details in Everything
Unleashed Firmware unlshd-076 adds Novoferm SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. support, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. EMV transaction display, and CCID worker improvements.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-076 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-076
Adds full support for Novoferm remotes in the SubGHz module Not checked yet Enables DEZ 8 display form for EM4100 LF RFID cards Not checked yet Allows choosing RSSI threshold in SubGHz Hopping mode Not checked yet Implements NFC EMV transaction visibility controls and reduces nesting Not checked yet
4 details in Everything
Unleashed Firmware unlshd-075 adds Legrand SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocol, Securakey LF support, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. write/emulation, JS storage module and ISO7816.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-075 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-075
Add new sub-GHz protocol - legrand 18bit Not checked yet Added Support for Securakey Protocol in LF RFID Not checked yet OFW: MF Ultralight Original write support Not checked yet OFW: Mifare Plus detection support Not checked yet OFW: Felica emulation Not checked yet
+5 more
show less
JS: adc support in gpio module Not checked yet JS: storage module (without virtual mount API at the moment) Not checked yet Add Finnish keyboard layout for BadUSB Not checked yet OFW: RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. : Add TarExtract command Not checked yet OFW: Add initial ISO7816 support Not checked yet
10 details in Everything
Unleashed Firmware unlshd-074 adds Skylanders plugin, Slix NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. capabilities, Toshiba IR remote, JS modules, and BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. negotiation scheme.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-074 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-074
Adds Skylanders plugin for the Flipper Zero Not checked yet Adds Slix protocol support to the NFC subsystem Not checked yet Adds Toshiba RAS-2518D infrared remote control capability Not checked yet Adds JavaScript textbox, math, and submenu modules for app development Not checked yet Adds new BLE connection parameters negotiation scheme Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! NFC CLI was removed with refactoring (will be back soon)
Unleashed Firmware unlshd-073 adds BadUSB layout support, Felica NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. poller, configurable IR TX, and new JS modules.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-073 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-073
Adds BadUSB layout support via the JS runtime Not checked yet Adds Felica (NFC-F) poller capability for NFC tag interactions Not checked yet Enables configurable Infrared TX output with AutoDetect and saved settings Not checked yet Updates radio stack to version v1.19.0 Not checked yet
4 details in Everything
└──▷ BREAKING ON UPGRADE
! The external amplifier option for SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. is removed and the feature is enabled by default on the unused gpio pin.
Unleashed Firmware unlshd-072 adds FindMy Flipper app, BadKB renaming, new JS modules, and Gallagher access control support.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-072 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-072
Adds the FindMy Flipper application for locating paired devices Not checked yet Introduces new JavaScript modules including UsbDisk, badusb.quit() , SubGHzSubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. , Submenu , BleBeacon, Keyboard , Math , GPIOGPIO General-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI. , and textbox Not checked yet Adds support for Gallagher access control (MIFARE Classic MIFARE Classic A family of contactless smart card chips made by NXP, widely used in access control and transit systems, whose weak proprietary encryption makes it a frequent target for RFID analysis and cloning tools. only) in the NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. app Not checked yet Enables custom UID entry when manually adding an NFC tag Not checked yet Implements dictionary-based MFC unlocking within the NFC app Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! Old EMV saved files may no longer be compatible due to NFC parser changes.
Unleashed Firmware unlshd-071 adds EMV and NDEF parsers, Dea Mio programming mode, SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. TX from file CLI, and expansion module protocol.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-071 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-071
subghz tx_from_file CLI command added for transmitting radio files directly from the Flipper's storage. Not checked yet Expansion module protocol support added, allowing configuration read/store via the new expansion settings interface. Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! The NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. CLI is removed and no longer available for use.
Adds EMV, NDEF, and Zolotaya Korona NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. parsers; SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. TX from file CLI; T5577 T5577 A reprogrammable RFID chip commonly used in 125 kHz proximity cards, widely supported by researchers because it can emulate many legacy card formats for access-control testing. write with random/custom password; expansion module protocol
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-070 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-070
NFC: EMV parser added Not checked yet NFC: Add NFC NDEF parser Not checked yet NFC: Zolotaya Korona Online parser added Not checked yet LF RFID: Write T5577 with random and custom password added (clear password via Extra actions) Not checked yet OFW: Expansion module protocol (+ expansion settings read and store in ram) Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! NFC CLI was removed with refactoring! Option to unlock Slix-L (NFC V) with preset or custom password was removed with refactoring
Unleashed Firmware unlshd-068 adds NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. plugin support, Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. transmitter UX changes, and new IR remote database entries.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-068 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-068
Adds ability to read WashCity card balance via a new NFC plugin Not checked yet Enables manual addition of MF Classic cards with custom UID in the NFC app Not checked yet Updates the NFC API to version v50.x, changing how third-party apps interact with NFC hardware Not checked yet Allows exiting the Sub-GHz transmitter using a long press action Not checked yet Adds support for Samsung AC models DB93 and AR-EH04 to the IR remote database Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! The NFC API is updated to v50.x; apps targeting the old NFC stack are no longer compatible and require a complete remake.! Removed EMV simple data parser and support for unlocking Slix-L (NFC V) with preset or custom passwords.
Unleashed Firmware unlshd-067 adds SubGhz signal deletion, SubGhz/EMV/MyKey/NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. parsers, USART DE/RE control, and RTC factory reset API.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-067 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-067
Adds a new SubGhz option to delete old signals when memory is full Not checked yet Adds support for manually adding Faac rc/xt protocols in the SubGhz manual entry interface Not checked yet Adds USART Bridge support for software control of DE/RE pins Not checked yet Adds FuriHal RTC register reset API and a new factory reset routine that wipes all RTC backup registers Not checked yet Adds Zolotaya Korona transport card NFC parser Not checked yet
+1 more
show less
Adds MyKey NFC parser Not checked yet
6 details in Everything
└──▷ BREAKING ON UPGRADE
! NFC API was updated to v50.x; apps built for the old stack are no longer compatible and require a complete remake! NFC CLI was removed with refactoring! The option to unlock Slix-L (NFC V) with preset or custom password was removed with refactoring! EMV simple data parser was removed with protocol refactoring! Mifare Classic with custom UID add manually option was temporarily removed
Unleashed Firmware unlshd-066 adds parsers for Umarsh/Kazan/Moscow transport cards, Saflok/MyKey KDFs, and Honeywell/SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Mastercode protocols.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-066 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-066
Adds parsers for Umarsh, Kazan, Moscow, and Metromoney(Tbilisi) NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. transport card formats Not checked yet Adds Saflok and MyKey KDF support to mf_classic_dict key processing Not checked yet Adds honeywell protocol support to the SubGHz stack Not checked yet Adds 303.9 MHz as a default SubGHz frequency Not checked yet Adds Mastercode SubGHz protocol support Not checked yet
+6 more
show less
Adds Movie and PTT modes to the Bluetooth Remote / USB Keyboard & Mouse app Not checked yet Adds Gen4 Actions (option to fix card with broken config) to the NFC Magic app Not checked yet Adds Mifare Classic nested auth support for OFW Not checked yet Adds write support for ST25TB tags Not checked yet Felica UID emulation added to OFW Not checked yet Adds infrared remote button index support Not checked yet
11 details in Everything
└──▷ BREAKING ON UPGRADE
! NFC CLI was removed with refactoring! EMV simple data parser was removed with protocol with refactoring! Option to unlock Slix-L (NFC V) with preset or custom password was removed with refactoring! Mifare Classic with custom UID add manually option was temporarily removed (Unleashed)! API was updated to v49.x which breaks compatibility with apps made for old nfc stack
Unleashed Firmware unlshd-065 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. manual entry systems and BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. Spam app updates
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-065 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-065
Adds four new SubGHz system presets to the Add Manually input menu for direct transmission support. Not checked yet Updates the BLE Spam application with expanded platform support including Android and Windows targets. Not checked yet
2 details in Everything
Adds custom button code 0x3 for Nice FLoRa S in SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. ; initial CCID and extended I2C HAL support with API bump to 39.x.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-064 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-064
Adds fal_embedded parameter for PLUGIN apps Not checked yet Initial CCID support (PC To Reader Transfer Block data) Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Extended I2C HAL functions introduce a breaking API change from version 38.x to 39.x
Unleashed Firmware unlshd-063 adds Apple BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. Spam app, FAAC SLH programming mode for SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. , and PicoPass emulation.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-063 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-063
Adds Apple BLE Spam app to builds n, r, e, and the full feature build. Not checked yet Adds FAAC SLH - Programming mode support in SubGHz remote. Not checked yet Adds PicoPass NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. emulation via Apps -> NFC menu. Not checked yet Adds Ignore Princeton option for SubGHz operations. Not checked yet Adds ability to save all SubGHz settings and reset config to default. Not checked yet
+4 more
show less
Adds SubGhz Remote with new design implementation. Not checked yet Adds support for Mifare Classic 4k SAK 0x38 ATQA 0x02, 0x04, 0x08. Not checked yet Adds FW_CFG_name build configuration variable and File Naming setting. Not checked yet Improves UI by allowing Keyboard ok to toggle select all in cursor mode. Not checked yet
9 details in Everything
└──▷ BREAKING ON UPGRADE
! API update from 36.x to 37.x requires updating apps.! API update from 35.x to 36.x for the new File Naming setting requires updating apps.! Storage HAL migration updates API from 37.x to 38.x requiring app updates.
New configurable dummy mode and up to 4 favourite apps in Desktop settings
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-062 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-062
Adds fully configurable dummy mode support in the Desktop environment. Not checked yet Increases the limit for pinned favourite desktop icons from 3 to 4. Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Desktop settings (Favourite apps, PIN Code, AutoLock time) are reset to default after installation; you must re-enter your PIN and favourite apps in Settings->Desktop.
Unleashed Firmware unlshd-061 adds manual NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. MF Classic with custom UID, clean c build option, and crypto engine API exposure.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-061 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-061
NFC: Add manually creating MF Classic cards with a custom UID. Not checked yet Builds : New c build variant contains only main apps, excluding the preinstalled app pack. Not checked yet OFW: Expose additional functions of the crypto engine to user applications (breaking API change 34.x -> 35.x). Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! Crypto engine API is updated from version 34.x to 35.x; existing external apps relying on the previous API must be migrated.
Unleashed Firmware unlshd-060 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Ebyte E07 power amp support and new env var for fbtenv control
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-060 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-060
Adds driver code for the Ebyte E07 module power amp switch in SubGHz, enabling support for devices like TehRabbitt's Flux Capacitor Board Not checked yet Adds an additional environment variable via fbtenv to allow users to control execution flow programmatically Not checked yet
2 details in Everything
Unleashed Firmware unlshd-059 adds Spectrum Analyzer modulation switching via hold OK and Infrared Play/Pause support in universal projector remote.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-059 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-059
Adds Spectrum Analyzer plugin with modulation switching capability by holding the OK button Not checked yet Adds Play / Pause toggle functionality to the Infrared universal projector remote Not checked yet
2 details in Everything
Adds Xiaomi TV and Daikin AC IR assets to Unleashed Firmware unlshd-058
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-058 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-058
Infrared: Universal remote assets - Add Xiaomi TV and (Daikin AC from OFW PR 2913 by minchogaydarov) Not checked yet Plugins: Spectrum Analyzer -> Add a Precise mode and other small changes (by @ALEEF02 | PR #550 #553) Not checked yet
2 details in Everything
Unleashed Firmware unlshd-057 adds Cut/Copy/Paste in FileBrowser and a SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Bruteforcer settings menu.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-057 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-057
Adds Cut /Copy /Paste & NewDir options to the Archive (FileBrowser) context menu Not checked yet Adds new extra settings menu for the SubGHz Bruteforcer plugin, exposing repeats and Te configuration options Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Desktop settings (Favoutite apps, PIN Code, AutoLock time) are reset to default after installation! Manually copied apps in the apps folder on microSD must be manually updated or removed; failure to do so causes issues due to OFW API version update
Unleashed Firmware unlshd-056 adds KeeLoq KeeLoq A proprietary block cipher developed by Microchip Technology, used in rolling-code systems for keyless entry devices; cyber tools target it to analyze or attack RF-based access control protocols. Centurion Nova SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. support and NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Maker plugin
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-056 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-056
Adds Keeloq: Centurion Nova read and emulate support to the SubGHz module Not checked yet Adds NFC Maker plugin for creating tags with URLs, WiFi, and other data Not checked yet Adds NFC/RFID detector app as a built-in application Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! Desktop settings (Favorite apps, PIN Code, AutoLock time) are reset to default after installing; users must reconfigure these in Settings->Desktop! OFW API version update requires removal of manually copied apps from the apps folder on microSD to avoid issues
Unleashed Firmware unlshd-055 adds Heat Index and SCD40 CO2 plugin support, SLIX2 NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. emulation, and debug sync capabilities
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-055 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-055
Adds Heat Index feature to the UniTemp plugin Not checked yet Appends carbon dioxide sensor (SCD40) support to the UniTemp plugin Not checked yet Adds SLIX2 NFC tag emulation support for practical use with Dymo printers Not checked yet Enables syncing apps on attach during debug, allowing debugging of already started apps that have crashed Not checked yet
4 details in Everything
Unleashed Firmware unlshd-054 adds external CC1101 module support via CLI for SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. operations.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-054 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-054
SubGHz: Added external cc1101 module at CLI to enable control of an external CC1101 hardware module directly from the command line interface. Not checked yet
1 detail in Everything
Unleashed Firmware unlshd-053 adds iButton and RFID fuzzers, SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. /Infrared support, new API v30
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-053 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-053
Plugins: adds new RFID 125KHz and iButton Fuzzers (remade from scratch with new features) Not checked yet Plugins: SubGHz Bruteforcer adds configurable Time delay setting between signals and higher repeat limits Not checked yet Plugins: Updates TOTP TOTP A one-time password algorithm (RFC 6238) that generates short-lived codes from a shared secret and the current time, giving cyber tools phishing-resistant second-factor authentication without a server round-trip. Authenticator plugin Not checked yet SubGHz: adds 430, 431 MHz to the default frequency list Not checked yet GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. : Byte input gains a keyboard-less editor mode accessible via Up button navigation Not checked yet
+3 more
show less
Infrared: adds RCA protocol support Not checked yet API: bumps device API version to 30.x and adds furi_hal_version_uid_default Not checked yet Settings: adds contrast adjustment under Settings->LCD and Notifications Not checked yet
8 details in Everything
└──▷ BREAKING ON UPGRADE
! API version changed from 29.x to 30.x due to Services API simplification; manually copied apps must be updated or removed.! Settings->LCD and Notifications are reset to default values one time after installation due to the new Contrast setting.
Adds Opal card reading support, BadUSB pause, IR Carrier 42QHB12D8S, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. V emulation latency fix
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-052 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-052
Adds support for reading Opal cards (Sydney, Australia transit system) Not checked yet Adds script execution pause capability to BadUSB payloads Not checked yet Adds Carrier 42QHB12D8S to the Infrared Universal AC remote library Not checked yet Removes delay from NFC V emulation loop to improve Android reader compatibility Not checked yet
4 details in Everything
└──▷ BREAKING ON UPGRADE
! The OFW API version was changed from 27.x to 28.x; manual apps in the apps folder may fail and must be removed or updated.
Unleashed Firmware unlshd-051 adds Opal card reading, BadUSB pauses, SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. KL support, and Carrier IR support.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-051 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-051
Adds manual SubGHz Keeloq STilmatic protocol support Not checked yet Adds script execution pause capability to BadUSB Not checked yet Adds Carrier 42QHB12D8S to Infrared Universal AC remote list Not checked yet Bumps FuriHal API version from 27.x to 28.x with bus abstraction Not checked yet
4 details in Everything
└──▷ BREAKING ON UPGRADE
! FuriHal API version changed from 27.x to 28.x; apps folder must be removed or cleaned of manually copied apps before installation to avoid OFW API conflicts.
Unleashed Firmware unlshd-050 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Remote Configurator plugin, Nexkey/Nexwatch RFID support, and desktop clock.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-050 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-050
Adds SubGHz Remote: Configurator plugin allowing creation and editing of map files directly on the Flipper Not checked yet Adds ability to show clock on main desktop screen (Settings->Desktop->Show Clock) Not checked yet Adds Gen4 ultimate card detection in Magic app NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. reader Not checked yet Adds custom button 0x78 support for SubGHz Security+ 2.0 protocol Not checked yet Enables PSK RAW emulation in LFRFID debug GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! API version was changed from 26.x to 27.x due to Infrared carrier frequency and duty cycle settings handling
Adds BadBT, SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. CAME Atomo manual buttons, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. SAK 0x89, BT MAC/name APIs, and desktop settings in-un-device renaming
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-049 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-049
Plugins: BadBT plugin (BT version of BadKB) added to the toolchain Not checked yet SubGHz protocol support for CAME Atomo - Add manually support and custom buttons support Not checked yet NFC Mifare mini with SAK 0x89 support enabled Not checked yet WiFi Marauder plugin can now sniff pmkid on selected aps from 0.10.4 update Not checked yet Infrared module moves External output out of debug with an added power option for external modules Not checked yet
+11 more
show less
SubGHz uses scene manager functions in DecodeRAW Not checked yet GUIGUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. submenu supports locked elements Not checked yet GUI text input now includes a cursor and minimum length setting capability Not checked yet Device name can now be changed directly via Settings->Desktop instead of external configuration Not checked yet OFW PR 2316 brings NFC V support to the core Not checked yet OFW adds lib/nfc/protocols/nfc_util.h to the API surface Not checked yet OFW app manifests now allow strings for the fbt fap_version field Not checked yet Desktop service via Rpc allows desktop integration; PIN lock is no longer bypassable by reboot, though settings reset to default on install Not checked yet Mfkey32 application added to OFW Not checked yet DigitalSequence and PulseReader applications added to OFW Not checked yet ufbt toolchain adds source "ufbt -s env" for toolchain access during app automation Not checked yet
16 details in Everything
└──▷ BREAKING ON UPGRADE
! Desktop settings (Favourite apps, PIN Code, AutoLock time) are reset to default on install; user must reconfigure Settings->Desktop! PIN lock can no longer be bypassed by rebooting the device
Unleashed Firmware unlshd-047 adds DeepSleep power-saving mode, Vizio/Sharp TV support, HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. mouse auto-clicker, and Bomberduck plugin.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-047 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-047
└──▷ HOW TO FIND IT
Configure the device to enable the new power-saving mode.
📍 Settings -> System -> Debug = OFF
Settings -> System -> Log level = None
Settings -> System -> Heap trace = None
Settings -> System -> Sleep Method = Default
Adds DeepSleep new power-saving mode, requiring settings Debug = OFF, Log level = None, Heap trace = None, and Sleep Method = Default to function Not checked yet Extends IR Universal TV remote with Sharp and Vizio brand support Not checked yet Adds HID mouse auto-clicker capability (OFW PR 2627) Not checked yet Introduces Bomberduck plugin for the Flipper Zero Not checked yet
4 details in Everything
Unleashed Firmware unlshd-046 adds DeepSleep power-saving mode, UI lock without PIN, and friendly RAW emulation.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-046 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-046
Adds DeepSleep new power-saving mode which replaces previous sleep behavior when configured correctly Not checked yet Enables locking the desktop interface without entering a PIN via short click on the Lock menu item Not checked yet
2 details in Everything
Unleashed Firmware unlshd-045 adds manual SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. scene creation and fixes NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. crash issues.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-045 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-045
Adds the ability to add manual scenes in the SubGHz application Not checked yet
1 detail in Everything
Unleashed Firmware unlshd-044 adds timestamp filenames in Radio Settings, Alutech AT4N support, and stealth mode.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-044 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-044
└──▷ HOW TO FIND IT
Save SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. captures with timestamped, protocol-named files instead of random strings for easier identification.
📍 Navigate to Radio Settings -> Time in names = ON
Automatically lock stealth mode when entering a specific range or context.
📍 Navigate to Settings -> Security -> Enable Stealth Mode and Auto-Selective Lock
SubGHz now supports timestamps and protocol names in file names, enabled via Radio Settings -> Time in names Not checked yet SubGHz adds experimental Nero Radio 57bit support with encoder improvements Not checked yet SubGHz Remote adds Alutech AT4N protocol support Not checked yet SubGHz allows ignoring Magellan and Cars (ScherKhan, Kia) signals Not checked yet Plugins: BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. Remote gains Keynote plugin with vertical layout Not checked yet
+5 more
show less
Plugins: WiFi Marauder keyboard adds extra symbols via UART UART A hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack. terminal port Not checked yet Plugins: GPS UART app supports configurable baudrates including 19200 Not checked yet Plugins: Bluetooth Remote implements YouTube Shorts remote control Not checked yet OFW introduces stealth mode and auto-selective lock functionality Not checked yet Power GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. changes battery style without requiring a reboot via new API trigger Not checked yet
10 details in Everything
└──▷ BREAKING ON UPGRADE
! Active RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. session icon updates require migrating from API version 22.x to 23.x! Deep Sleep Idle feature requires migrating from API version 21.x to 22.x! FuriHal GPIO GPIO General-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI. naming and explicit pull updates require migrating from API version 20.x to 21.x
Adds manual fixes for AN-Motors AT4 SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. and a StarLine ignore option; adds IR Scope app and updates TOTP TOTP A one-time password algorithm (RFC 6238) that generates short-lived codes from a shared secret and the current time, giving cyber tools phishing-resistant second-factor authentication without a server round-trip. /UART UART A hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack. plugins
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-041 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-041
Adds StarLine ignore option in Read -> Config (PR #410) Not checked yet Adds IR Scope app (by @kallanreed, PR #407) Not checked yet Updates TOTP (Authenticator) plugin with Steam guard support Not checked yet Updates UART Terminal plugin with AT commands support Not checked yet
4 details in Everything
Unleashed Firmware unlshd-040 adds Allmatic SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. support, badUSB WAIT_FOR_BUTTON_PRESS, UART UART A hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack. baudrate changes, and AVR ISP programmer plugin
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-040 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-040
Adds manual Allmatic (read as Beninca) protocol support for SubGHz transmission. Not checked yet Adds WAIT_FOR_BUTTON_PRESS functionality to badUSB scripts. Not checked yet Adds AVR ISP Programmer FAP with optional 5V power enable on start. Not checked yet Adds interactive UART baudrate switching (9600, 57600, 115200) in the GPS NMEA plugin via the Up button. Not checked yet
4 details in Everything
Unleashed Firmware unlshd-039 adds AN-Motors AT4, Alutech AT4N, and Aprimatic keeloq SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocol support.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-039 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-039
Unleashed Firmware unlshd-038 adds GSN SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. support, BadUSB boot protocol, and app loader API mismatch override
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-038 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-038
Adds GSN protocol support to the SubGHz module Not checked yet Enables manual configuration for SubGHz hopping with 318 and 418 MHz bands Not checked yet Adds App Loader option to ignore API mismatches for custom applications Not checked yet Implements boot protocol support for BadUSB device emulation Not checked yet Improves OFW screen streaming performance Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! The 1-Wire Overdrive Mode API changes from version 19.x to 20.x! The hmac_sha256 function is removed from the public API, changing the API from version 18.x to 19.x
Unleashed Firmware unlshd-037 adds WAV Player 16-bit support and OTP OTP One-time password: a short-lived numeric or alphanumeric code valid for a single authentication attempt, generated via TOTP or HOTP standards, giving cyber tools phishing-resistant second-factor verification without stored shared secrets. exit codes
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-037 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-037
Adds 16 bit audio support to the built-in WAV Player plugin Not checked yet Makes the OTP programmer return specific exit codes based on error type Not checked yet
2 details in Everything
Unleashed Firmware unlshd-036 adds DS1420 iButton support and tertiary favourite app setting on Desktop.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-036 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-036
iButton: Add support for DS1420 (not fully tested) Not checked yet Desktop: Option to set Tertiary favourite app (Hold right arrow on desktop) Not checked yet Desktop: Ability to disable favourite app (use last element in a main list None (disable)) Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! Desktop settings (pin code, favourite app, autolock time) are resetted once after installing this release due to changes in settings structure.
Unleashed Firmware unlshd-035 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocols (CAME Space, Stilmatic), NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. APDU CLI command, and external plugin app type requirement.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-035 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-035
SubGHz: Adds support for new CAME Space and Stilmatic / Schellenberg protocols Not checked yet SubGHz: Adds ability to send custom button codes (0x80, 0x81, 0xE2) via Security+ 2.0 Not checked yet SubGHz: Adds manual protocol entry for Beninca, Sommer(FSK) , IronLogic, DTM Neo, Gibidi, and Elmes Electronic Not checked yet NFC: Introduces new CLI command for APDU operations Not checked yet OFW: Adds support for Dallas DS1971 iButton protocol Not checked yet
+1 more
show less
Plugins: Requires apptype=FlipperAppType.EXTERNAL in plugin manifests for external apps Not checked yet
6 details in Everything
└──▷ BREAKING ON UPGRADE
! External plugins must now set apptype=FlipperAppType.EXTERNAL in their manifest to function correctly.
Unleashed Firmware unlshd-034 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. custom button layout, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Mifare Key B reading, and iCx card reset support
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-034 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-034
SubGHz: Default custom buttons layout for non-standard remotes allows mapping transmit on different physical buttons when standard ones are broken. Not checked yet
1 detail in Everything
└──▷ BREAKING ON UPGRADE
! API changed from 17.x to 18.x due to ValueMutex removal! API changed from 16.x to 17.x for stricter CAME validation and verbose error handling in SubGhz protocols! API changed from 15.x to 16.x for iButton system and app refactoring
Unleashed Firmware unlshd-033 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. programming modes for Nice Flor S/Somfy Telis and BFT Mitto, manual Picopass factory key support, and unified power/debug commands.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-033 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-033
Adds custom button mapping for Nice Flor S / Somfy Telis subprotocols with programming mode support Not checked yet Enables manual entry and receiver programming for BFT Mitto remotes via SubGHz plugin Not checked yet Allows manual entry and regular-button programming for Nice One remotes in SubGHz Not checked yet Adds factory key support for Picopass protocol analysis Not checked yet Unifies power info, power debug, and device_info into a single command Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! The battery charging voltage limit API was updated to version 15.x (previously 14.x), which breaks manually installed plugins that depend on the old interface.
Adds Keeloq (Beninca) SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocol support, custom button mappings for Alutech AT4N, and GPIO GPIO General-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI. debug TX output
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-032 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-032
SubGHz: Keeloq: Beninca - protocol support enables decoding/encoding of the Beninca rolling code protocol. Not checked yet Custom buttons for Keeloq and Alutech AT4N allows sending signal with different button codes via arrow buttons. Not checked yet Infrared: Debug TX PIN output settings moves IR TX signal out to GPIO. Not checked yet Debug mode counter increase settings (+5, +10, default +1) adds finer granularity for SubGHz debug mode counter increments. Not checked yet
4 details in Everything
Unleashed Firmware unlshd-031 adds SWD SWD Serial Wire Debug, a two-pin ARM debug and programming interface that replaces JTAG on Cortex-M microcontrollers, letting cyber tools flash firmware or read memory with minimal hardware connections. Probe plugin, autolock PIN code, and NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Mifare Classic data display.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-031 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-031
Adds SWD Probe plugin to main firmware Not checked yet Adds Desktop autolock with PIN Code setting Not checked yet Enables Display of Mifare Classic data in the NFC app Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! Desktop settings (pin code, favourite app, autolock time) are resetted upon installation due to changes in settings structure
Unleashed Firmware unlshd-030 adds Nice ON2E SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. support and updates TOTP TOTP A one-time password algorithm (RFC 6238) that generates short-lived codes from a shared secret and the current time, giving cyber tools phishing-resistant second-factor authentication without a server round-trip. plugin.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-030 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-030
Adds Nice ON2E (Nice One) protocol support to the SubGHz receiver Not checked yet Updates the TOTP (Authenticator) plugin from akopachov Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! 467.75 frequency is removed from the SubGHz Frequency Analyzer to reduce false detections, though manual transmission on this frequency remains possible
Unleashed Firmware unlshd-028 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. custom modulation for lrs pagers and internal file browser tab.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-028 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-028
Adds frequency 467.75 to the default SubGHz list Not checked yet Adds Internal tab to FileBrowser (DEBUG mode only) Not checked yet
2 details in Everything
Unleashed Firmware unlshd-027 adds BinRAW and five new SubGhz protocols, SPI SPI Serial Peripheral Interface, a synchronous communication bus standard used to connect microcontrollers to sensors, flash memory, and other peripherals at short range; cyber tools use it to read or write firmware on embedded devices. Mem Manager, and Mifare value block support
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-027 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-027
Adds SubGhz protocol BinRAW (binarization of data quantized quantized Storing a model's weights at lower numeric precision, such as 8 or 4 bits instead of 16, so it needs less memory and runs faster. It trades a small amount of accuracy for fitting on smaller hardware. by the minimum correlated duration) Not checked yet Adds SubGhz protocol KingGates Stylo4k encoder for sending signals Not checked yet Adds SubGhz protocol Nice One Not checked yet Adds SubGhz protocol Alutech at-4n encoder for sending signals Not checked yet Adds SubGhz protocol DOOYA Not checked yet
+4 more
show less
Adds SubGhz protocol Linear Delta-3 in the Bruteforcer plugin for 310MHz Not checked yet Adds SPI Mem Manager C port to use Flipper as a programmer for supported chips Not checked yet Adds NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Mifare Classic value block commands Not checked yet Updates API to version 14.x Not checked yet
9 details in Everything
Unleashed Firmware unlshd-026 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. CC1101 support, LaCrosse-TX/Paradox LF protocols, MIFARE MINI NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. , and more
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-026 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-026
SubGHz: External CC1101 support for expanded frequency range capabilities. Not checked yet Plugins: Added movement interval configuration for mouse_jiggler USB & BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. plugins. Not checked yet OFW: Add support for GUI-CTRL command in bad_usb scripts. Not checked yet OFW: Print card CID directly in storage info output. Not checked yet OFW: LF-RFID: add CRC calculation to paradox protocol. Not checked yet
+5 more
show less
OFW: WS (Wireless Sensor): add LaCrosse-TX (TFA Dostmann) protocol support. Not checked yet OFW: NFC: add MIFARE MINI card type support. Not checked yet OFW: emv: parse track1 & track2 equivalent data for EMV cards. Not checked yet GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. : Custom font set function available for system UI theming. Not checked yet Plugins: Solitaire and Blackjack games now affect Flipper's experience level. Not checked yet
10 details in Everything
Unleashed Firmware unlshd-024 adds Somfy Telis SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. encoder, Text Viewer/ProtoView/UART UART A hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack. plugins, and IR page-turning.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-024 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-024
Adds Somfy Telis Encoder support in the SubGHz menu for controlling compatible home automation devices Not checked yet Extends default SubGHz frequency range to include 350Mhz alongside existing bands Not checked yet Includes new plugins: Text Viewer , UART Terminal , and ProtoView via the extra apps pack Not checked yet Adds UniTemp plugin support for new temperature sensors Not checked yet Enables manual control of Infrared signal decoding by allowing users to disable automatic Learn RAW detection Not checked yet
+2 more
show less
Updates Infrared capabilities with page-turning functionality for supported universal remote assets Not checked yet Adds Czech (CZ) keyboard layout to the BadUSB subsystem Not checked yet
7 details in Everything
Unleashed Firmware unlshd-023 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Holtek HT12X support, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Mifare dictionary speedups, and new barcode plugins.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-023 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-023
Adds Holtek_ht12x protocol support to the SubGhz application Not checked yet Improves Mifare dictionary attack performance in the OFW stack Not checked yet Enables manual creation of Nice Flor S and Nice Smilo frames in SubGHz Not checked yet Allows removing password protection from T5577 T5577 A reprogrammable RFID chip commonly used in 125 kHz proximity cards, widely supported by researchers because it can emulate many legacy card formats for access-control testing. RFID cards to make them operational Not checked yet Adds EAN-13 barcode generation support in the Barcode Generator plugin Not checked yet
+5 more
show less
Adds 2048 Game as a new plugin Not checked yet Enables +5V power output on Wifi Marauder plugin start for custom boards Not checked yet Adds float_tools to the OFW SDK API Not checked yet Displays OTP OTP One-time password: a short-lived numeric or alphanumeric code valid for a single authentication attempt, generated via TOTP or HOTP standards, giving cyber tools phishing-resistant second-factor verification without stored shared secrets. Flipper region on debug and about screens Not checked yet Allows setting Fahrenheit/Celsius temperature units via Settings > System in WeatherStation Not checked yet
10 details in Everything
Unleashed Firmware unlshd-022 adds new SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocols, IDTECK card support, and a VSCode serial console task.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-022 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-022
Plugins -> SubGHz Bruteforcer: Add support for PT2260, SMC5326, UNILARM, Honeywell(file only) protocols Not checked yet OFW: Added support for IDTECK cards Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! API version changed from 10.x to 11.x due to breaking changes, requiring the updated Extra pack.
Unleashed Firmware unlshd-020 adds POCSAG Pager plugin and improves SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. app launch times.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-020 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-020
Adds the flipper-pager plugin for POCSAG Pager functionality Not checked yet Improves SubGHz application launch time performance significantly Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! The setting_user file is removed during this specific update (unlshd-020); users must backup custom changes as the file will no longer be overwritten by future updates.
Unleashed Firmware unlshd-018 adds CAME 315Mhz to SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Bruteforcer and byte selection control.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-018 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-018
Adds CAME 315Mhz support in the SubGHz Bruteforcer plugin for broader frequency coverage. Not checked yet Enables selecting two bytes in the BF existing dump mode of the SubGHz Bruteforcer, with navigation via the Up button. Not checked yet
2 details in Everything
Unleashed Firmware unlshd-017 adds Auriol HG0601A SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. support, BadUSB layouts, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Mifare DESFire enhancements, and API 8.x update.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-017 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-017
Adds Auriol HG0601A protocol support in the SubGHz plugin for WS (Wall Switch) devices Not checked yet Adds Slovenian (si), Croatian (hr), and Bosnian Latin (ba) keyboard layouts to BadUSB PR applications Not checked yet Adds NFC Mifare DESFire support for non-parsed apps Not checked yet Adds NFC NTAG password auto-capture capability Not checked yet Introduces API version 8.x with unified Info, App Error, and Data Xchange endpoints Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! API version bumped to 8.x which is a breaking change in the OFW API
Ansonic 12bit SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocol support, src CLI command, GT-WT02 Infrared protocol, and new BlackJack/Solitaire/HEX Viewer plugins.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-016 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-016
SubGhz Bruteforcer plugin adds support for the Ansonic 12bit (FM238) protocol Not checked yet Adds src / source CLI command to execute other CLI scripts during exploration Not checked yet Power management now displays the battery percentile while charging Not checked yet Frequency Analyzer saves the last trigger level setting for SubGHz analysis Not checked yet SubGHz launch speed from favorites optimized Not checked yet
+2 more
show less
i2c tools receive a UI update and improved name display Not checked yet New plugins installed: BlackJack, Solitaire, and HEX Viewer Not checked yet
7 details in Everything
Unleashed Firmware unlshd-015 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. frequency analyzer enhancements and new plugins including BH1750 and iButton Fuzzer.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-015 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-015
└──▷ HOW TO FIND IT
Scan for signals on the newly supported SubGHz frequencies.
📍 Navigate to Radio › SubGHz › Signal Analyzer and observe peaks at 434.075 MHz or 434.390 MHz
Measure ambient light levels using the new BH1750 sensor plugin.
📍 Go to Apps › Beta › BH1750 Lightmeter
Fuzz iButton devices with the new plugin.
📍 Go to Apps › Beta › iButton Fuzzer
Adds frequencies 434.075 and 434.390 to the SubGHz subsystem Not checked yet Adds a counter to the SubGHz Frequency Analyzer along with GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. fixes that enable the OK button when a signal is present Not checked yet Adds BH1750 lightmeter plugin Not checked yet Adds iButton Fuzzer plugin Not checked yet
4 details in Everything
Unleashed Firmware unlshd-014 adds NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. magic card writing and auto-run Bad USB
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-014 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-014
Adds support for NFC Magic cards (gen1a) including the ability to write UID via OFW: NFC subsystem. Not checked yet Enables running Bad USB scripts automatically immediately after device connection via new startup trigger. Not checked yet
2 details in Everything
Unleashed Firmware unlshd-013 adds DHT, Morse Code, and Game15 plugins plus Ambient Weather protocol support.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-013 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-013
Adds DHT Temperature sensor Monitor plugin via PR Not checked yet Adds Morse Code plugin Not checked yet Adds Game15 puzzle game as new plugin entry Not checked yet Adds AM2320 Sensor plugin Not checked yet
4 details in Everything
Adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocol support in bruteforer and multiple OFW subsystem improvements
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-011 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-011
Adds new protocol support to the existing SubGHz Bruteforer dump analysis Not checked yet Adds API version 8.2 changes including Infrared API for .fap plugins Not checked yet Adds OFM Mf Classic initial write, update, and reader detection capabilities Not checked yet Adds Keeloq magic serial types 2 and 3 support in OFW Not checked yet Adds ability to add extra repeats to SubGHz Bruteforer via left/right keys on start screen Not checked yet
+8 more
show less
Adds context menu option to show file content in File Browser archive view Not checked yet Adds debug feature to change animations by holding OK button on main screen Not checked yet Adds new icons for SubGHz signals (Dynamic, Static, Raw) and infrared universal remotes Not checked yet Adds 330Mhz support in SubGHz user settings and frequency analyzer Not checked yet Adds Oregon2 additional sensor defines in OFW Not checked yet Adds RAW read threshold RSSI support in SubGHz subsystem Not checked yet Adds Acurite 592TXR protocol support in WS (Weather Station) subsystem Not checked yet Adds support for all screen orientations in OFW Not checked yet
13 details in Everything
└──▷ BREAKING ON UPGRADE
! API version changed to 8.2 requiring download of extra pack update if unleashed version was lower than 009
Unleashed Firmware unlshd-010 adds Infrared API for .faps, SubGhz Bruteforcer repeats, and RAW Read threshold rssi.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-010 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-010
Adds Plugins: SubGHz Bruteforcer - ability to add extra repeats (accessed by pressing left/right in first start screen) Not checked yet Adds OFW: SubGhz: add 330Mhz in setting user and frequency analyzer Not checked yet
2 details in Everything
Unleashed Firmware unlshd-007 adds HC-SR04 distance sensor plugin and Acurite protocol to WS
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-007 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-007
Adds the HC-SR04 Distance sensor plugin for ultrasonic ranging Not checked yet Adds Acurite 592TXR protocol support in the Weather Station (WS) plugin Not checked yet
2 details in Everything
Unleashed Firmware unlshd-003 adds EMV card UID emulation and saving support.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-003 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-003
Adds EMV card UID emulation capability Not checked yet Enables saving EMV cards for later emulation Not checked yet
2 details in Everything
Unleashed Firmware unlshd-002 adds Temperature Sensor Plugin support for HTU21D/SI7021
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-002 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-002
Adds GPS plugin via UART UART A hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack. NMEA 0183 module and i2c Tools plugin; adds Acurite-606TX and LaCrosse_TX141THBv2 wireless sensor protocols.
└──▷ GET THIS VERSION
copy
$ git clone --branch unlshd-001 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout unlshd-001
Added GPS plugin that works with the NMEA 0183 module via UART Not checked yet Added i2c Tools plugin Not checked yet Added support for the Acurite-606TX wireless sensor protocol (OFW -> WS) Not checked yet Added support for the LaCrosse_TX141THBv2 wireless sensor protocol (OFW -> WS) Not checked yet
4 details in Everything
Adds a new Frequency analyzer with history and manual frequency selection capabilities
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-9a9abd https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-9a9abd
Adds a new Frequency analyzer that maintains a history of the last 4 frequencies, allowing users to select a previous frequency from the list and hold OK to enter Read mode Not checked yet
1 detail in Everything
SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Bruteforcer now supports Chamberlain 9bit 433MHz; adds 434.19 and 434.62 MHz frequencies to user config
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-79c304 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-79c304
Plugins: SubGHz Bruteforcer adds support for Chamberlain 9bit 433MHz protocol. Not checked yet SubGHz user config now includes 434.19 and 434.62 MHz frequencies. Not checked yet
2 details in Everything
Adds Chamberlain 7bit/8bit to SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Bruteforcer plugin and updates API to v4.1
└──▷ GET THIS VERSION
copy
$ git clone --branch un2-72713d https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un2-72713d
└──▷ BREAKING ON UPGRADE
! SubGHZ files using Protocol: Magellen are no longer valid; the protocol name must be changed to Magellan in the file text.
Adds Airforce protocol to SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. , Elite card reading to Picopass, raw IR receive, and USB UART UART A hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack. RTS/DTR pin support.
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-72713d https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-72713d
Adds Airforce protocol support to SubGHz with a fix for CAME wrong number of bits in key Not checked yet Adds ability to read Elite cards via the Picopass plugin Not checked yet Adds forced RAW receive option for Infrared CLI Not checked yet Allows pins 0 and 1 to be used as RTS/DTR for USB UART Bridge Not checked yet Updates API version from 3.2 to 4.1 due to breaking changes in SubGHz parts Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! Protocol Magellen is renamed to Magellan in subghz files; existing files must be manually edited! Apps compiled against API 3.2 must be recompiled to work with the new API version 4.1
Unleashed Firmware un2-f61a8f adds support for additional SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. (FAAC, Normstahl) and LFRFID protocols.
└──▷ GET THIS VERSION
copy
$ git clone --branch un2-f61a8f https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un2-f61a8f
SubGHz: Keeloq - added support for FAAC RC,XT, Mutancode, Normstahl Not checked yet LFRFID: CLI - Add raw_analyze to usage help Not checked yet Plugins: Added DTMF Dolphin [(by litui)](https://github.com/litui/dtmf_dolphin) Not checked yet Infrared: Updated universal remote assets (by @Amec0e) Not checked yet OFW: Feature: infrared add remote to cli Not checked yet
5 details in Everything
Adds manual entry of 433MHz Security+ 1.0/2.0 sub-GHz signals
└──▷ GET THIS VERSION
copy
$ git clone --branch un2-d5b239 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un2-d5b239
Add 433Mhz Security+ 1.0/2.0 in add manually in subghz Not checked yet
1 detail in Everything
Adds PIN lock via long press of the up button and shows BadUSB script errors on-screen.
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-8fdee1 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-8fdee1
Adds ability to lock the device by long pressing the up button requiring a PIN Not checked yet Adds display of BadUSB script errors on the device screen Not checked yet Updates the TOTP TOTP A one-time password algorithm (RFC 6238) that generates short-lived codes from a shared secret and the current time, giving cyber tools phishing-resistant second-factor authentication without a server round-trip. (Authenticator) plugin Not checked yet
3 details in Everything
Unleashed Firmware un1-255227 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. JCM support, TOTP TOTP A one-time password algorithm (RFC 6238) that generates short-lived codes from a shared secret and the current time, giving cyber tools phishing-resistant second-factor authentication without a server round-trip. /Metronome/Minesweeper plugins, and 36-bit AWID/ble tiktok controllers
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-255227 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-255227
Adds JCM (keeloq) encoder support for SubGHz transmission. Not checked yet Adds TOTP (Authenticator) plugin. Not checked yet Adds Metronome plugin. Not checked yet Adds Minesweeper plugin. Not checked yet Enables 36-bit AWID support via OFW PR 1838. Not checked yet
+1 more
show less
Adds BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. TikTok controller via OFW PR 1859. Not checked yet
6 details in Everything
└──▷ BREAKING ON UPGRADE
! Dolphin score points update resets Dolphin Level to zero.
Unleashed Firmware un2-906124 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Bruteforcer v3 with faster speeds and RAW detection fixes.
└──▷ GET THIS VERSION
copy
$ git clone --branch un2-906124 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un2-906124
Adds SubGHz Bruteforcer v3 with improved speed across all protocols (e.g., CAME reduced from 17:48 to 5:58). Not checked yet Adds SubGHz RAW signal detection that splits files properly and adds random noise before/after the signal for better decoding. Not checked yet
2 details in Everything
Adds configurable time delay in RFID Fuzzer plugin for slow readers
└──▷ GET THIS VERSION
copy
$ git clone --branch un4-0f9ea9 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un4-0f9ea9
Adds the ability to adjust the time delay between cards during an RFID Fuzzing session. Not checked yet
1 detail in Everything
Adds RFID protocols PAC PAC A Proxy Auto-Configuration file, a JavaScript snippet a browser or OS fetches to decide which proxy server to route each request through, letting cyber tools intercept or redirect traffic without per-app configuration. /Stanley and H10301 to the RFID Fuzzer plugin
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-0f9ea9 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-0f9ea9
SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. analyzer long-press OK switch to Read menu and label line length increase
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-76d38e https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-76d38e
OK button long press in SubGHz Frequency analyzer switches to the Read menu Not checked yet Sub-GHz Remote label line length increased to 16 characters Not checked yet
2 details in Everything
Unleashed Firmware un1-bcfb12 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. 868.8MHz support, an IR asset update, a Signal Generator app, and qFlipper .tgz installation support.
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-bcfb12 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-bcfb12
Adds 868.8 mhz into user config for Sommer Systems to enable SubGHz frequency support. Not checked yet Introduces the Signal Generator app as a new application feature. Not checked yet Updates Infrared assets for improved compatibility or content. Not checked yet Enables firmware installation via .tgz package using qFlipper 1.2.0, Web Updater, or self-update. Not checked yet
4 details in Everything
Unleashed Firmware un1-12a629 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. frequency reuse, settings persistence, new Bruteforcer protocol and BETT support.
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-12a629 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-12a629
Frequency analyzer now feeds the selected frequency into Read modes on OK press. Not checked yet SubGHz preserves last-used frequency and modulation settings across sessions. Not checked yet Plugins: SubGHz Bruteforcer adds chamberlain 9bit 300mhz protocol support. Not checked yet SubGHz Add Manually menu adds BETT protocol. Not checked yet
4 details in Everything
└──▷ BREAKING ON UPGRADE
! DFU files are no longer included in releases; users must use .tgz packages, web updater, or microSD update package to install.
SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. bruteforcer plugin improvements and faster firmware flashing via new DFU file handling. no breaking_changes
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-5bb7ca https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-5bb7ca
Adds SubGHz bruteforcer plugin fixes and speed-up Not checked yet
1 detail in Everything
└──▷ BREAKING ON UPGRADE
! DFU files no longer included in releases; users must use .tgz file with qFlipper, web updater, or microSD update package.
Unleashed Firmware un1-a6b98c adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. bruteforcer plugin and preliminary Rust support
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-a6b98c https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-a6b98c
Adds a SubGHz bruteforcer plugin (PR #75) with deep refactoring for RF signal analysis. Not checked yet
1 detail in Everything
New C++ plugin support in ELF ELF The standard binary format for executables, shared libraries, and object files on Linux and most Unix-like systems, giving cyber tools a predictable structure to parse, instrument, or analyze compiled code. loader and RAW SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. datetime naming.
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-2a2078 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-2a2078
Adds C++ plugin support to the ELF-Loader for firmware extensions Not checked yet Updates OFW PR: SubGHz default filename format to include datetime in RAW read names Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! DFU files are no longer included in releases; users must install via qFlipper (.tgz), web updater, or microSD package.
Adds HIDProx support to the RFID Fuzzer and updates UI/subGHz protocol handling
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-3360f8 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-3360f8
└──▷ BREAKING ON UPGRADE
! DFU files are no longer included in release assets; users must use .tgz, web updater, or microSD update package to install.
Adds 868.95 MHz SubGhz config, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. user dictionary management, and Russian transport card parsers.
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-f5ff64 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-f5ff64
Adds 868.95 MHz to the subghz user config for supported regions Not checked yet Adds NFC user dictionary list, delete, and de-duplication capabilities in OFW Not checked yet Adds Oregon v2.1 decoder for SubGhz signals in OFW Not checked yet Adds error popup when NFC chip is not initialized or disconnected Not checked yet
4 details in Everything
└──▷ BREAKING ON UPGRADE
! DFU files are no longer included in releases; users must use the web updater or self-update package
Unleashed Firmware un1-b9a766 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Detect Raw, Brazilian Portuguese BadUSB layout, new clock timer, and updates to existing apps.
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-b9a766 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-b9a766
SubGHz Detect Raw feature added for detecting raw signals in the Sub-GHz band. Not checked yet Brazilian Portuguese BadUSB keyboard layout added via PR 65. Not checked yet New clock/timer app combined from contributions by GMMan and kowalski7cc. Not checked yet
3 details in Everything
Unleashed Firmware un6-0f6f9a adds CAME 12-bit bruteforce at 307.80MHz and restores MPU Hal
└──▷ GET THIS VERSION
copy
$ git clone --branch un6-0f6f9a https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un6-0f6f9a
Include CAME 12 bits bruteforce on 307.80Mhz (PR 63 / by @enovella) Not checked yet Add MPU Hal back Not checked yet
2 details in Everything
Adds .sub playlist plugin via PR 62 and reports HW Region as 0 to skip subghz provisioning.
└──▷ GET THIS VERSION
copy
$ git clone --branch un5-0f6f9a https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un5-0f6f9a
Integrates the .sub playlist plugin (originally by darmiel) into firmware. Not checked yet
1 detail in Everything
Adds SubGhz Bruteforce plugin and NRFSniff unique count display to Unleashed Firmware un2-0f6f9a
└──▷ GET THIS VERSION
copy
$ git clone --branch un2-0f6f9a https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un2-0f6f9a
Add SubGhz Bruteforce plugin (PR #57) Not checked yet
1 detail in Everything
Adds SubGhz Bruteforce plugin and enhanced NRFSniff metrics to Unleashed Firmware
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-0f6f9a https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-0f6f9a
Adds SubGhz Bruteforce plugin for automated key recovery scenarios Not checked yet Enhances NRFSniff with unique count display to distinguish signal varieties Not checked yet
2 details in Everything
Adds Intertechno_V3 and Prastel SubGhz protocols, Picopass write support, PAC PAC A Proxy Auto-Configuration file, a JavaScript snippet a browser or OS fetches to decide which proxy server to route each request through, letting cyber tools intercept or redirect traffic without per-app configuration. /Stanley etc. LF RFID protocols, NRF24 sniffer tweaks, and SD/RAM RAM Working memory that holds programs and data while a computer is running. Its contents usually disappear when power is removed. optimizations.
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-e7a5d1 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-e7a5d1
Adds Intertechno_V3 protocol support for SubGhz Not checked yet Adds Prastel protocol support for SubGhz Not checked yet Enables Picopass write capability Not checked yet Adds PAC/Stanley, Paradox, Jablotron, Viking, Pyramid protocols support for LF RFID Not checked yet Improves NRF24 sniffer speed and reliability via tweaked sniff parameters Not checked yet
+1 more
show less
Speeds up SD card operations and enlarges available RAM Not checked yet
6 details in Everything
Unleashed Firmware un1-ab4bb5 adds long button press support for UniRF, EM4100 RFID fuzzer plugin, and Frequency Analyzer feedback modes
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-ab4bb5 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-ab4bb5
Adds UniRF long button press support for Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. remote protocols to enable holding buttons for extended durations Not checked yet Introduces a new RFID EM4100 Fuzzer plugin for testing RFID card vulnerabilities Not checked yet Adds feedback modes to the Frequency Analyzer for improved signal visualization during analysis Not checked yet
3 details in Everything
Unleashed Firmware adds LF-RFID subsystem with new protocols/Animal tags, Multi Converter plugin, and MFC 1/4K manual UID support.
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-7c54fc https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-7c54fc
Replaces Hex/Dec converter with Multi Converter plugin for broader format handling Not checked yet Enables MFC 1/4K 4/7bUID input in the Add Manually screen for NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. cards Not checked yet Adds Magellen protocol support in SubGhz subsystem Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! Build filenames changed from cg to un prefix (e.g. cg-unleashed.dfu -> un-unleashed.dfu)
Unleashed Firmware un1-9b1384 adds new NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. info screens and updates Wifi Marauder
└──▷ GET THIS VERSION
copy
$ git clone --branch un1-9b1384 https://github.com/DarkFlippers/unleashed-firmware.git
$ git checkout un1-9b1384
Adds OFW: New NFC info screens to display detailed information on the Flipper Zero's screen for NFC interactions. Not checked yet
1 detail in Everything