PAGES
Subscribe Get it delivered — five to ten releases we picked each morning from the tools you run, with every release in the issue on the web. Compare plans →

The Cyber Toolchain — issue -030, January 31, 2024

THE CYBER TOOLCHAIN NO. -030
Tail
THE DAILY RELEASE FIREHOSE
PUBLISHED JANUARY 31, 2024 · EVERY DAY
EDITIONS tail grep head ls diff uniq

The daily firehose — everything the toolchain shipped today, already filtered.

We read every release from the 1325 tools on our watchlist at the source — GitHub and GitLab release notes, vendor release pages and changelogs, project blogs and feeds, vendor press releases, and the source code behind the tag. Bug-fix-only releases and non-product newsroom noise are dropped; what's left is summarized down to the new capability, how to try it, and any screenshots or videos the release itself published. Every entry links to the sources it was built from.

VIEW
ISSUE VIEW scroll
ISSUE WIDTH reading width
Do you prefer scroll?
ADDITIONAL FILTERS
$ tct list   # 148 tools matched
Offensive Security
◆  Hacking Hardware

RFID Research Group proxmark3

[Steamboat Willie.4.17768][2024-01-03]

Proxmark3 adds real-time LF sampling, hf_unisniff standalone sniffing, and hw bootloader command

  • Adds hw bootloader subcommand to reboot the device into bootloader mode
  • Adds hf unisniff standalone mode combining 14a/14b/15 sniffing with extra flash save options
  • Adds real-time LF sampling support
  • Adds Saflok KDF for generating MIFARE ClassicMIFARE ClassicA family of contactless smart card chips made by NXP, widely used in access control and transit systems, whose weak proprietary encryption makes it a frequent target for RFID analysis and cloning tools. keys via the existing key generation infrastructure

4 details in Everything

Was this useful?

m5stick-nemo

v2.4.1 3 releases · 2024-01-07 → 2024-01-28 Stable

M5 Stick C firmware for high-tech pranks and digital self defense.

Adds Plus2 Clock mode and fixes TV-B-Gone for Plus2/Cardputer.

└──▷ GET THIS VERSION
$ git clone --branch v2.4.1 https://github.com/n0xa/m5stick-nemo.git
# already have the repo? check out this version:
$ git checkout v2.4.1
2 more releases in this issue · 2024-01-07 → 2024-01-28
v2.4.0 Stable

m5stick-nemo v2.4.0 adds battery info support for M5StickC Plus2 and NEMO Portal cardputer keyboard entry

└──▷ GET THIS VERSION
$ git clone --branch v2.4.0 https://github.com/n0xa/m5stick-nemo.git
# already have the repo? check out this version:
$ git checkout v2.4.0
  • Adds battery info display and M5LED fix for the M5StickC Plus2 hardware variant.
  • Enables NEMO Portal to accept SSID input via the Cardputer keyboard.

2 details in Everything

v2.3.1 Stable

Adds Evil Twin SSID cloning and manual SSID editing via web portal in v2.3.1

└──▷ GET THIS VERSION
$ git clone --branch v2.3.1 https://github.com/n0xa/m5stick-nemo.git
# already have the repo? check out this version:
$ git checkout v2.3.1
  • Enables cloning an Evil Twin SSID directly from the WiFi scan list
  • Adds HTTP endpoint http://172.0.0.1/ssid to manually change the default SSID
  • Persistently saves updated SSID to EEPROM for retention across power cycles and upgrades

3 details in Everything

Was this useful?

DarkFlippers Unleashed Firmware

unlshd-070 2 releases · 2024-01-06 → 2024-01-31 Stable

Flipper Zero Unleashed Firmware, an unlocked alternative firmware.

Adds EMV, NDEF, and Zolotaya Korona NFCNFCNear Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. parsers; SubGHzSubGHzRadio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. TX from file CLI; T5577T5577A reprogrammable RFID chip commonly used in 125 kHz proximity cards, widely supported by researchers because it can emulate many legacy card formats for access-control testing. write with random/custom password; expansion module protocol

└──▷ GET THIS VERSION
$ git clone --branch unlshd-070 https://github.com/DarkFlippers/unleashed-firmware.git
# already have the repo? check out this version:
$ git checkout unlshd-070
  • NFC: EMV parser added
  • NFC: Add NFC NDEF parser
  • NFC: Zolotaya Korona Online parser added
  • LF RFID: Write T5577 with random and custom password added (clear password via Extra actions)
  • OFW: Expansion module protocol (+ expansion settings read and store in ram)

5 details in Everything

└──▷ BREAKING ON UPGRADE
  • !NFC CLI was removed with refactoring
  • !Option to unlock Slix-L (NFC V) with preset or custom password was removed with refactoring
1 more release in this issue · 2024-01-06 → 2024-01-31
unlshd-068 Stable

Unleashed Firmware unlshd-068 adds NFCNFCNear Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. plugin support, Sub-GHzSub-GHzRadio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. transmitter UX changes, and new IR remote database entries.

└──▷ GET THIS VERSION
$ git clone --branch unlshd-068 https://github.com/DarkFlippers/unleashed-firmware.git
# already have the repo? check out this version:
$ git checkout unlshd-068
  • Adds ability to read WashCity card balance via a new NFC plugin
  • Enables manual addition of MF Classic cards with custom UID in the NFC app
  • Updates the NFC API to version v50.x, changing how third-party apps interact with NFC hardware
  • Allows exiting the Sub-GHz transmitter using a long press action
  • Adds support for Samsung AC models DB93 and AR-EH04 to the IR remote database

5 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The NFC API is updated to v50.x; apps targeting the old NFC stack are no longer compatible and require a complete remake.
  • !Removed EMV simple data parser and support for unlocking Slix-L (NFC V) with preset or custom passwords.
Was this useful?

Pwnagotchi

v2.7.9 5 releases · 2024-01-11 → 2024-01-27 Stable

A Raspberry Pi gadget instrumenting Bettercap for Wi-Fi pwning. This is the maintained fork; the original evilsocket repo last released in 2021.

Pwnagotchi v2.7.9 adds Raspberry Pi 5 support and whitelist improvements

└──▷ GET THIS VERSION
$ git clone --branch v2.7.9 https://github.com/jayofelony/pwnagotchi.git
# already have the repo? check out this version:
$ git checkout v2.7.9
  • Adds official support for the Raspberry Pi 5 hardware platform

1 detail in Everything

4 more releases in this issue · 2024-01-11 → 2024-01-27
v2.7.7 Stable

Pwnagotchi v2.7.7 adds aircrackonly and hashie plugins by default

└──▷ GET THIS VERSION
$ git clone --branch v2.7.7 https://github.com/jayofelony/pwnagotchi.git
# already have the repo? check out this version:
$ git checkout v2.7.7
  • Adds aircrackonly plugin to the default plugin set, enabled by default.
  • Adds hashie plugin to the default plugin set, enabled by default (requires hcxtools).
  • Consolidates whitelist configuration for grid, wigle, wpa-sec, and onlinehashcrack plugins into a single unified list.

3 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Pi 5 support requires flashing the new image; existing installations do not work out of the box.
v2.7.3 Stable

Pwnagotchi v2.7.3 adds native support for 2.13inch G and 2.66 B e-ink displays.

└──▷ GET THIS VERSION
$ git clone --branch v2.7.3 https://github.com/jayofelony/pwnagotchi.git
# already have the repo? check out this version:
$ git checkout v2.7.3
  • Adds 2.13inch G display support
  • Adds 2.66 B display support

2 details in Everything

v2.7.1 Stable

v2.7.1 adds skip logic in whitelist based on hostname and partial MAC match to prevent deauthentication.

└──▷ GET THIS VERSION
$ git clone --branch v2.7.1 https://github.com/jayofelony/pwnagotchi.git
# already have the repo? check out this version:
$ git checkout v2.7.1
  • Adds a skip check for hostnames and MAC (upto last 2 digits) in whitelist so they will not be deauthenticated anymore.

1 detail in Everything

v2.6.2 Stable

Pwnagotchi v2.6.2 enables first official Raspberry Pi 5 support via 64-bit image and re-enables AI components.

└──▷ GET THIS VERSION
$ git clone --branch v2.6.2 https://github.com/jayofelony/pwnagotchi.git
# already have the repo? check out this version:
$ git checkout v2.6.2
  • Adds first release image supporting Raspberry Pi 5 (requires 64-bit RPi systems).
  • Re-enables the AI component, which was previously disabled due to compatibility issues with bettercap.

2 details in Everything

Was this useful?

Flipper Devices Flipper Zero

0.98.2

A portable multi-tool for pentesters and geeks; this is its official firmware.

Flipper Zero 0.98.2 adds subghz tx_from_file CLI cmd, new expansion module protocol, NFCNFCNear Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. DESFire improvements, and HIDHIDHuman Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. MFC plugin.

└──▷ GET THIS VERSION
$ git clone --branch 0.98.2 https://github.com/flipperdevices/flipperzero-firmware.git
# already have the repo? check out this version:
$ git checkout 0.98.2
└──▷ TRY IT
Transmit a captured Sub-Ghz signal file stored on the device's SD card without needing a PC.
$ subghz tx_from_file /ext/firmware/MySignal.raw
  • Adds subghz tx_from_file CLI command to transmit raw Sub-Ghz files directly from the device.
  • Introduces a new configurable serial logging feature via FuriHal's new serial API with separate control plane.
  • Adds HID MFC plugin for emulating MIFARE ClassicMIFARE ClassicA family of contactless smart card chips made by NXP, widely used in access control and transit systems, whose weak proprietary encryption makes it a frequent target for RFID analysis and cloning tools. cards via HID interface.

3 details in Everything

Was this useful?
◆  Post-Exploitation

SpecterOps BloodHound

v5.5.0 2 releases · 2024-01-04 → 2024-01-23 Stable

BloodHound v5.5.0 adds Group Management page, tag/untag UI, Helm chart, new ADCSADCSActive Directory Certificate Services, Microsoft's PKI role for issuing and managing X.509 certificates inside a Windows domain; cyber tools target it because misconfigurations frequently allow privilege escalation or domain compromise. edges and selectors API changes

└──▷ GET THIS VERSION
$ git clone --branch v5.5.0 https://github.com/SpecterOps/BloodHound.git
# already have the repo? check out this version:
$ git checkout v5.5.0
└──▷ TRY IT
Deploy BloodHound to a Kubernetes cluster using the newly provided Helm chart
$ helm install bloodhound ./charts/bloodhound --namespace bloodhound --create-namespace
Manage groups directly via the UI's new Group Management page without external scripts
📍Open the Group Management page from the main sidebar in the BloodHound web interface.
Tag or untag specific AD objects directly from the visualization canvas for quick filtering or notes
📍Right-click a node in the BloodHound graph view and select Tag or Untag from the context menu.
  • Adds Helm chart for Kubernetes deployment in charts/bloodhound
  • Adds Group Management page for managing groups directly in the application
  • Enables tagging and untagging nodes from the context menu in the UI
  • Adds partnertier2support and members properties to tier-zero/high-value dynamic update rules (DURs)
  • Adds CanAbuseUPNCert edge type for ADCS exploitation paths
+4 more show less
  • Adds CanAbuseWeakCertBinding edge type specifically for ADCS ESC6 attacks
  • Adds canAbuseUPNCert edge to post-processed relationships
  • Adds new audit log fields for enhanced logging capabilities
  • Adds asset group mock endpoint for testing and development

9 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The selectors endpoint has been updated, potentially breaking existing integrations relying on the previous API structure
1 more release in this issue · 2024-01-04 → 2024-01-23
v5.4.0 Stable

Bloodhound v5.4.0 adds ADCSADCSActive Directory Certificate Services, Microsoft's PKI role for issuing and managing X.509 certificates inside a Windows domain; cyber tools target it because misconfigurations frequently allow privilege escalation or domain compromise. node ingestion, owned node API, container panel and context menus.

└──▷ GET THIS VERSION
$ git clone --branch v5.4.0 https://github.com/SpecterOps/BloodHound.git
# already have the repo? check out this version:
$ git checkout v5.4.0
└──▷ TRY IT
Retrieve the Cypher queries a user has saved for future analysis.
$ curl -X GET http://localhost:8080/api/v1/users/{userId}/saved-cypher-queries
Trigger a context menu action on a selected node to automate remediation or further enumeration.
$ curl -X POST http://localhost:8080/api/nodes/{id}/actions -d '{"action": "disable_mfa"}'
Update an asset group's selectors via the API to dynamically change which objects belong to the group.
$ curl -X POST http://localhost:8080/api/asset-group-selectors/update -d '{"groupId": "1", "selectors": [...]}'
  • /api/v1/users/{userId}/saved-cypher-queries endpoint for user-saved Cypher queries
  • GET /api/asset-group-selectors/update endpoint to update asset group selectors
  • POST /api/nodes/:id/actions context menu entry to execute actions on selected graph nodes
  • container entity panel in the UI showing expanded details for node types
  • ingestion and identification of ADCS (Active DirectoryActive DirectoryMicrosoft's directory service for Windows networks that centralises authentication and authorisation; cyber tools target or integrate with it because it controls identity and access across most enterprise environments. Certificate Services) nodes and edges in the cyber tool

5 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Gorm AutoMigrate is removed; schema changes must now be handled by stepwise migrations
Was this useful?
◆  Reconnaissance & OSINT

ProjectDiscovery subfinder

v2.6.4

Subfinder v2.6.4 adds -all flag for crtsh and enables SecurityTrails pagination.

└──▷ GET THIS VERSION
$ git clone --branch v2.6.4 https://github.com/projectdiscovery/subfinder.git
# already have the repo? check out this version:
$ git checkout v2.6.4
  • Adds -all option to the crtsh source to extend the result limit
  • Adds pagination support to the SecurityTrails source

2 details in Everything

Was this useful?

ProjectDiscovery httpx-toolkit

v1.3.8

The httpx-toolkit probes HTTP services in parallel to identify live hosts, technologies, status codes, titles, and other web metadata.

httpx v1.3.8 adds -exclude, screenshot timeout, and headless options while removing old -ec flag

└──▷ GET THIS VERSION
$ git clone --branch v1.3.8 https://github.com/projectdiscovery/httpx.git
# already have the repo? check out this version:
$ git checkout v1.3.8
└──▷ TRY IT
Filter out CDNCDNA content delivery network, servers distributed across locations that cache and serve content near readers. It can reduce loading time and traffic to the original server. IPs and private ranges during scanning
$ httpx -u https://example.com -e 'cdn,private-ips'
Wait longer for a slow page to fully render its screenshot
$ httpx -u https://slow-site.com -st 30
Pass specific Chrome flags for headless enumeration
$ httpx -u https://example.com -ho '--no-sandbox' -ho '--disable-gpu'
  • -exclude (alias -e) replaces -ec to exclude hosts matching cdn, private-ips, cidr, ip, or regex filters
  • -screenshot-timeout (alias -st) sets the screenshot capture timeout in seconds (default 10)
  • -headless-options (alias -ho) passes additional arguments to headless Chrome

3 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The old -ec option is removed; users must migrate to -exclude
Was this useful?

Nettacker

0.3.3

New Ivanti, Citrix, and WordPress scanning modules added to Nettacker 0.3.3

└──▷ GET THIS VERSION
$ git clone --branch 0.3.3 https://github.com/OWASP/Nettacker.git
# already have the repo? check out this version:
$ git checkout 0.3.3
  • Adds ivanti_ics_cve-2023-46805 vulnerability detection module for Ivanti ICSICSIndustrial Control Systems — hardware and software that monitor and control physical processes like power grids, pipelines, and manufacturing lines, making them a target for cyber tools focused on operational technology environments.
  • Adds ivanti_epmm_cve-2023-35082 vulnerability detection module for Ivanti EPMM
  • Adds wordpress_post_smtp_cve-2023-6875 vulnerability detection module for WordPress POST SMTPSMTPThe application-layer protocol used to send email between servers and from clients to servers; cyber tools use it to relay alerts, phishing simulations, or exfiltrated data over standard mail infrastructure. Mailer Plugin
  • Adds citrix_last_patched_date_scan module for scanning Citrix Gateway last patched date
  • Adds html_title_scan module for HTML title scanning
+2 more show less
  • Adds ivanti_ics_last_patched_date_scan module for Ivanti ICS last patched date scan
  • Adds ivanti_epmm_last_patched_date_scan module for Ivanti EPMM last patched date scan

7 details in Everything

Was this useful?
◆  Wireless & RF

AngryOxide

v0.8.1 2 releases · 2024-01-15 → 2024-01-28 Stable

v0.8.1 adds --noactive flag for broken drivers and custom Attack Rate option.

└──▷ GET THIS VERSION
$ git clone --branch v0.8.1 https://github.com/Ragnt/AngryOxide.git
# already have the repo? check out this version:
$ git checkout v0.8.1
  • --noactive CLI argument to manually disable active monitor mode for broken mt7921/mt7601 drivers
  • Attack Rate option allows customization of attack speed

2 details in Everything

1 more release in this issue · 2024-01-15 → 2024-01-28
v0.7.1 Stable

Adds AutoHunt mode to AngryOxide v0.7.1 for automatic channel scanning.

└──▷ GET THIS VERSION
$ git clone --branch v0.7.1 https://github.com/Ragnt/AngryOxide.git
# already have the repo? check out this version:
$ git checkout v0.7.1
└──▷ USE IT
Run the tool to automatically find and lock onto wireless targets across all available channels.
shell
angryoxide --auto-hunt
  • AutoHunt mode automatically adds all available channels, performs rapid 3x fast hop cycles to discover targets, and locks onto them once found.

1 detail in Everything

Was this useful?

hcxtools

2024-01-26

hcxpcapngtool introduces a new --lts CLI flag to export BSSID data for GPS synchronization.

└──▷ GET THIS VERSION
$ git clone --branch 2024-01-26 https://github.com/ZerBea/hcxtools.git
# already have the repo? check out this version:
$ git checkout 2024-01-26
  • Adds the --lts=<file> option to hcxpcapngtool, allowing users to store a BSSID list formatted with Linux timestamp, AP MAC, and ESSID for synchronization with external GPS data

1 detail in Everything

Was this useful?
◆  Exploitation & C2

BC Security powershell-empire

v5.9.1 2 releases · 2024-01-20 → 2024-01-25 Stable

Adds BOFBOFA Buffer Overflow exploit technique where attacker-controlled input overwrites adjacent memory to hijack program execution; cyber tools use it to develop and deliver shellcode-based exploits against vulnerable binaries. modules (nanodump, secinject, etc.), YAML module format, and custom certificate path config

└──▷ GET THIS VERSION
$ git clone --branch v5.9.1 https://github.com/BC-SECURITY/Empire.git
# already have the repo? check out this version:
$ git checkout v5.9.1
└──▷ TRY IT
Scan systems for credentials using the new nanodump BOF module within Empire.
$ usemodule powershell/credentials/nanodump
Configure Empire to use a custom TLS certificate for secure agent communications.
yaml
certfile: /path/to/custom/cert.pem
keyfile: /path/to/custom/key.pem
Handle validation errors in a custom module by raising the new exception type instead of returning a tuple.
python
raise ModuleValidationException('Invalid parameter provided')
  • Adds BOF modules to Empire as yaml files, including ClipBoardWindow-Inject, nanodump, secinject, tgtdelegation, and TrustedSec's SA modules
  • Adds support for returning validation/execution exceptions (ModuleValidationException, ModuleExecutionException, PluginValidationException, PluginExecutionException) from module and plugin generate/execute functions
  • Adds decorators for module generate functions to automatically get the module_source and call finalize_module
  • Adds custom certificate path configuration via server_config.yaml
  • Updates install script and Docker file to use Python 3.12.1

5 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Returning tuples from module generate functions is deprecated; raise ModuleValidationException for 400 errors and ModuleExecutionException for 500 errors instead of using handle_error_message
  • !Returning tuples from plugin execution functions is deprecated; raise PluginValidationException for 400 errors and PluginExecutionException for 500 errors
  • !Loading plugins from a .plugin file is deprecated; use a .py file with a plugin.yaml instead
  • !Extending the Plugin class is deprecated; use the BasePlugin class instead
  • !Plugins must now have a plugin.yaml; the Base plugin class is now BasePlugin
1 more release in this issue · 2024-01-20 → 2024-01-25
5.9.0 Stable

Empire 5.9.0 adds YAML-based BOFBOFA Buffer Overflow exploit technique where attacker-controlled input overwrites adjacent memory to hijack program execution; cyber tools use it to develop and deliver shellcode-based exploits against vulnerable binaries. modules and custom cert path to server config

└──▷ GET THIS VERSION
$ git clone --branch 5.9.0 https://github.com/BC-SECURITY/Empire.git
# already have the repo? check out this version:
$ git checkout 5.9.0
  • Adds custom_certificate_path key to server_config.yaml to specify the TLS certificate location for the Empire server
  • Adds support for Beacon Object Files (BOFs) as YAML modules, enabling immediate use of ClipBoardWindow-Inject, nanodump, secinject, tgtdelegation, and TrustedSec's SA modules

2 details in Everything

Was this useful?
Application Security
◆  Code Security

Codacy

Cloud January 2024

Codacy Cloud Jan 2024 adds security category filtering and switches to installation access tokensaccess tokensA credential that authorizes a client to use a service or API. It usually has limited permissions and a lifetime; anyone holding it may be able to use those permissions..

  • Adds ability to filter security and risk items by security category in the UI
  • Switches repository integration method from deprecated SSH keys to installation access tokens

2 details in Everything

Was this useful?

Veracode

January 18, 2024 4 releases · 2024-01-04 → 2024-01-18 Stable

Veracode CLI package command enables Static Analysis autopackaging for Java, JS, and Python.

└──▷ USE IT
Automatically package a Java application for Static Analysis via the CLI.
shell
veracode package --language java <path-to-app>
  • package subcommand removes manual packaging steps to streamline application security tests

1 detail in Everything

3 more releases in this issue · 2024-01-04 → 2024-01-18
The Veracode CLI now supports autopackaging for Veracode Static Analysis ​ Stable

Veracode CLI adds Static Analysis autopackaging for Java, JavaScript, and Python

  • Adds the package subcommand to the Veracode CLI to automate application packaging for Static Analysis

1 detail in Everything

SCA API enhancements ​ Stable

getProjectIssues endpoint now accepts all parameters supported by getWorkspaceIssues.

Veracode Vulnerability Database now includes exploit information ​ Stable

The Veracode SCASCASoftware composition analysis, identifying third-party dependencies and checking them for known vulnerabilities and license issues. It covers software a team uses rather than writes itself. vulnerability database now provides EPSSEPSSExploit Prediction Scoring System, an estimate of the probability that a published vulnerability will be exploited in the next 30 days. It helps prioritize investigation and patching. and KEVKEVCISA's Known Exploited Vulnerabilities catalog, a list of vulnerabilities with evidence of exploitation in real attacks. It helps teams prioritize fixes for problems attackers already use. exploit data to help security teams prioritize remediation efforts based on real-world exploitability.

Was this useful?

Bearer

v1.37.0 3 releases · 2024-01-09 → 2024-01-29 Stable

Adds unanchored class declaration support for source code analysis.

└──▷ GET THIS VERSION
$ git clone --branch v1.37.0 https://github.com/Bearer/bearer.git
# already have the repo? check out this version:
$ git checkout v1.37.0
2 more releases in this issue · 2024-01-09 → 2024-01-29
v1.35.0 Stable

Bearer v1.35.0 adds new scan context for GitLab and fixes Azure DevOps URL handling.

└──▷ GET THIS VERSION
$ git clone --branch v1.35.0 https://github.com/Bearer/bearer.git
# already have the repo? check out this version:
$ git checkout v1.35.0
  • feat: add more scan context for gitlab (#1464)

1 detail in Everything

v1.34.0 Stable

Bearer v1.34.0 adds simplified GitLab diff scan configuration

└──▷ GET THIS VERSION
$ git clone --branch v1.34.0 https://github.com/Bearer/bearer.git
# already have the repo? check out this version:
$ git checkout v1.34.0
  • Adds simplified configuration for GitLab diff scans via the gitlab feature.
  • Removes hardcoded application_identity value from the CLI binary.

2 details in Everything

Was this useful?

GitLab

16.8 4 releases · 2024-01-11 → 2024-01-18 Stable

GitLab 16.8 adds static analysis in MR diffs, Google Cloud Secret Manager integration, Workspaces GA, admin 2FA enforcement, Maven proxy, and instance-level S3 audit streamin

  • Adds Static Analysis Findings display in the Merge request changes view drawer
  • Adds Google Cloud Secret Manager support for retrieving secrets in CI/CD jobs
  • Marks Workspaces as generally available with error handling, private project, and SSH support
  • Adds setting to enforce 2FA for GitLab administrators on self-managed instances
  • Adds Maven dependency proxy for external Java repositories in GitLab Self-Managed
+19 more show less
  • Adds Issue Analytics report visualization for closed issues over time
  • Adds DORA Performers score panel to the Value Streams Dashboard
  • Adds gitlab.rb command generation for GitLab Kubernetes Agent Server, Workhorse, and Exporter passwords
  • Enables smarter approval resets in merge requests using git-patch-id alignment
  • Adds file blame information view directly on the file page
  • Adds ability to set CPUCPUThe main general-purpose processor in a computer. It runs application instructions and coordinates work with memory and other hardware. and memory usage per workspace at the GitLab agent level
  • Adds full support for Kubernetes version 1.28
  • Adds five new custom role abilities: manage project/group access tokensaccess tokensA credential that authorizes a client to use a service or API. It usually has limited permissions and a lifetime; anyone holding it may be able to use those permissions., manage group members, archive project, delete project
  • Allows assigning a custom role as the default SAML SSOSAML SSOAn authentication protocol that lets a user log in once with an identity provider and access multiple services without re-entering credentials, by passing signed XML assertions between parties. provisioned role
  • Adds filtering of streaming audit events by sub-group or project at the group level
  • Adds Instance-level audit event streaming destination to AWS S3
  • Adds Prevent branch modification setting to scan result policies
  • Adds SAMLSAMLA standard for passing signed identity assertions between a sign-in provider and an application. It lets a user sign in through their organization's identity provider. Group Sync support for mapping custom roles in SAML SSOSSOSingle sign-on, using one identity provider to sign in to multiple applications. It reduces separate passwords and centralizes account and access management.
  • Enables SAML SSO authentication for merge request approval instead of password-based auth
  • Introduces group-level landing page for Analytics Dashboards with Value Streams Dashboard
  • Adds ability to view ancestor hierarchy for Tasks and Objectives/Key Results
  • Adds CSV export of compute minutes used by instance runners in the Runner Fleet Dashboard
  • Tweaks CI_MERGE_REQUEST_DESCRIPTION predefined variable to truncate at 2700 characters and adds CI_MERGE_REQUEST_DESCRIPTION_IS_TRUNCATED variable
  • Adds Windows 2022 support for SaaSSaaSSoftware delivered over the internet and billed by subscription, hosted and operated by the vendor so the buyer skips installation and infrastructure management. runners using saas-windows-medium-amd64 tag

24 details in Everything

3 more releases in this issue · 2024-01-11 → 2024-01-18
16.1.6 Stable

User password reset now accepts multiple email addresses in GitLab 16.1.6.

16.3.7 Stable

GitLab 16.3.7 allows password reset for multiple email addresses linked to one user account.

16.4.5 Stable

GitLab 16.4.5 now accepts multiple email addresses for password resets.

Was this useful?

noir

v0.12.1

noir v0.12.1 adds -f output format options for targeted extraction

└──▷ GET THIS VERSION
$ git clone --branch v0.12.1 https://github.com/owasp-noir/noir.git
# already have the repo? check out this version:
$ git checkout v0.12.1
└──▷ TRY IT
Extract a list of function parameters from source code for fuzzing without post-processing.
$ noir -b my_app -f only-param
Export findings in a line-delimited JSON format suitable for streaming or log ingestion.
$ noir -b my_app -f jsonl
  • Adds only-url, only-param, only-header, and only-cookie output formats to the -f flag
  • Adds jsonl output format to the -f flag

2 details in Everything

Was this useful?

Openlayer

Cost-per-request, new tests, subpopulation support for data tests, and more precise row filtering

Openlayer adds cost-per-request monitoring, subpopulation filtering for data tests, and new Column average/contains string test types.

  • Adds Column average test to ensure column averages fall within a specified range
  • Adds Column contains string test where values in one column must contain strings from another column
  • Adds cost-related tests: Max cost, Mean cost, and Total cost per evaluation window
  • Shows request costs on the Requests page with cost graph support
  • Enables subpopulation filtering for integrity and consistency data tests using row-level metrics like conciseness
+1 more show less
  • Returns to the timeline page to visualize commit performance against goals over time

6 details in Everything

Was this useful?

HashiCorp terraform

v1.7.2 2 releases · 2024-01-17 → 2024-01-31 Stable

terraform fmt now includes .tfmock.hcl files in formatting.

└──▷ GET THIS VERSION
$ git clone --branch v1.7.2 https://github.com/hashicorp/terraform.git
# already have the repo? check out this version:
$ git checkout v1.7.2
  • terraform fmt now formats Terraform mock data files (.tfmock.hcl).
  • Add diagnostics when a generated provider block fails schema validation.

2 details in Everything

1 more release in this issue · 2024-01-17 → 2024-01-31
v1.7.0 Stable

Terraform v1.7.0 adds terraform test mocking, removed block for refactoring, and console plan evaluation

└──▷ GET THIS VERSION
$ git clone --branch v1.7.0 https://github.com/hashicorp/terraform.git
# already have the repo? check out this version:
$ git checkout v1.7.0
└──▷ TRY IT
Evaluate expressions against the planned state during an interactive console session
$ terraform console -plan
> plan.resources[0].attributes.id
  • terraform test: Add mock_provider, override_resource, override_data, and override_module blocks to .tftest.hcl files for provider and resource mocking
  • Add removed block to configuration for refactoring module references without manually running terraform state rm
  • terraform console: Add -plan option to evaluate expressions against the planned new state
  • import block: Support for_each to expand imports for multiple resource instances
  • backend/s3: use_legacy_workflow argument defaults to false and uses AWS SDK default provider chain
+1 more show less
  • terraform graph: Default output is now a simplified resources-only graph

6 details in Everything

Was this useful?

Snyk

Snyk AppRisk - View Only Permission 4 releases · 2024-01-26 → 2024-01-29 Stable

Snyk AppRisk now supports View Only permissions for team members.

  • Adds View Only permission level for Snyk AppRisk users

1 detail in Everything

3 more releases in this issue · 2024-01-26 → 2024-01-29
The New REST Issues API is now GA Stable

Snyk's New REST Issues API reaches GA, unifying SCASCASoftware composition analysis, identifying third-party dependencies and checking them for known vulnerabilities and license issues. It covers software a team uses rather than writes itself./SASTSASTStatic application security testing, analyzing source code or compiled code for vulnerabilities without running the application. It helps developers find problems before deployment./IaCIaCInfrastructure as Code: the practice of defining and provisioning compute infrastructure through machine-readable config files rather than manual processes, giving cyber tools repeatable, version-controlled environment setup. issues across projects and orgs.

  • Introduces the General Availability of the Unified Issues API for listing all Snyk issues (SCA, SAST, IaC+) in a single paginated call.
  • Adds new filters to the REST Issues API to allow tailored querying of unified issues.

2 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Experimental REST Issues API versions are scheduled for deprecation in 30 days.
  • !The beta REST Issues API version is scheduled for deprecation in 90 days.
Snyk Code - DeepCode AI Fix now supports 7 languages Stable

DeepCode AI Fix adds Java, Python and C/C++, plus limited support for Go, C# and APEX

  • Adds DeepCode AI Fix support for Go (Limited support)
  • Adds DeepCode AI Fix support for C# (Limited support)
  • Adds DeepCode AI Fix support for APEX (Limited support)

3 details in Everything

Snyk Open Source Gradle 8 CLI support Stable

Snyk CLI v1.1273.0+ supports scanning Gradle 8 projects.

Was this useful?
◆  Web Application Security

Hackmanit TInjA

1.1.0

TInjA 1.1.0 adds hybrid template injection scanning with verification requests and tinja raw command for importing HTTP request files.

└──▷ GET THIS VERSION
$ git clone --branch 1.1.0 https://github.com/Hackmanit/TInjA.git
# already have the repo? check out this version:
$ git checkout 1.1.0
└──▷ TRY IT
Scan a previously saved HTTP request for template injection vulnerabilities using the new raw import capability.
$ tinja raw -R "/path/to/request.txt"
  • Adds a hybrid approach for template injection: sends a tailored verification request after initial detection to reduce false positives.
  • Adds tinja raw subcommand to read and scan from raw HTTP request file paths via the -R flag.

2 details in Everything

Was this useful?

sstimap

v1.2

Adds --req-body-type for multi-format payloads and --shell to specify target shell in SSTImap v1.2

└──▷ GET THIS VERSION
$ git clone --branch v1.2 https://github.com/vladko312/SSTImap.git
# already have the repo? check out this version:
$ git checkout v1.2
└──▷ USE IT
Exploit an SSTI vulnerability where the payload must be sent as JSON rather than URL-encoded form data.
shell
sstimap -u http://target/app -p param --req-body-type json
Force the tool to use a specific shell interpreter (e.g., cmd.exe) when targeting Windows systems.
shell
sstimap -u http://target/app --shell cmd.exe
  • Adds --req-body-type flag (json, text, fromhex) to handle non-URLencoded request bodies
  • Adds --shell argument to specify the expected target system shell

2 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The original Twig payload is now renamed to Twig_v1; scripts referencing the previous default Twig payload name will fail.
Was this useful?

ProjectDiscovery nuclei

v3.1.7 3 releases · 2024-01-08 → 2024-01-22 Stable

Nuclei v3.1.7 adds -scan-id to upload results to existing pdpc scans

└──▷ GET THIS VERSION
$ git clone --branch v3.1.7 https://github.com/projectdiscovery/nuclei.git
# already have the repo? check out this version:
$ git checkout v3.1.7
└──▷ USE IT
Attach current scan results to a specific PDCP scan for aggregation.
shell
nuclei -u example.com -cloud-upload -scan-id XXXXXX
2 more releases in this issue · 2024-01-08 → 2024-01-22
v3.1.6 Stable

Nuclei v3.1.6 adds GetServiceTicket and GetKerberoastableUsers methods to the kerberos and ldap modules for new attack capabilities.

└──▷ GET THIS VERSION
$ git clone --branch v3.1.6 https://github.com/projectdiscovery/nuclei.git
# already have the repo? check out this version:
$ git checkout v3.1.6
└──▷ USE IT
Retrieve a service ticket via the kerberos module.
go
// Code snippet demonstrating the new method
kerberos.GetServiceTicket(...)
Identify kerberoastable users via the ldap module.
go
// Code snippet demonstrating the new method
ldap.GetKerberoastableUsers(...)
  • Adds GetServiceTicket method to the kerberos module
  • Adds GetKerberoastableUsers method in ldap module

2 details in Everything

v3.1.4 Stable

nuclei v3.1.4 adds self-contained fuzzing input, -as custom tags, internal matchers, and L4 layer exclusion.

└──▷ GET THIS VERSION
$ git clone --branch v3.1.4 https://github.com/projectdiscovery/nuclei.git
# already have the repo? check out this version:
$ git checkout v3.1.4
  • self-contained is now supported for input in fuzzing templates, allowing templates to define their own input sources directly.
  • The -as CLI option accepts additional custom tags that are included with scan results.
  • Matchers can now be hidden from flow output by setting internal: true within the matcher definition.
  • Layer 4 scans via fastdialer now support an exclude list to filter out specific targets.

4 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The to attribute in extractor configurations is removed; file write operations in extractors are no longer supported for security reasons.
Was this useful?

ProjectDiscovery Katana

v1.0.5

Katana v1.0.5 adds the -disable-redirects flag to control redirect following behavior

└──▷ GET THIS VERSION
$ git clone --branch v1.0.5 https://github.com/projectdiscovery/katana.git
# already have the repo? check out this version:
$ git checkout v1.0.5
└──▷ USE IT
Scan a target without following redirects, useful for testing raw endpoint responses or avoiding redirect loops.
shell
katana -url https://example.com -dr
  • Adds the -dr (and --disable-redirects) CLI flag to disable following HTTP redirects

1 detail in Everything

Was this useful?

Commix

v3.9

Commix v3.9 adds --ignore-stdin, --ignore-proxy, and --smart heuristic checks

└──▷ GET THIS VERSION
$ git clone --branch v3.9 https://github.com/commixproject/commix.git
# already have the repo? check out this version:
$ git checkout v3.9
  • --smart option runs tests only when positive heuristics are detected.
  • --ignore-proxy switch ignores the system default HTTP proxy.
  • --ignore-stdin hidden option allows ignoring STDIN input.

3 details in Everything

Was this useful?

humble

1.33

humble v1.33 adds -ua flag for custom User-Agent and shows version/best-worst stats in global statistics

└──▷ GET THIS VERSION
$ git clone --branch 1.33 https://github.com/rfc-st/humble.git
# already have the repo? check out this version:
$ git checkout 1.33
└──▷ USE IT
Scan a target while impersonating a specific browser to evade basic bot detection.
shell
humble -ua "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36" https://example.com
  • Adds -ua CLI argument to supply a customized User-Agent string during analysis
  • Shows the tool version within the analysis output
  • Displays best and worst results in the global statistics view

3 details in Everything

Was this useful?

sslscan

2.1.3

Adds -quiet flag to sslscan 2.1.3 for quiet shutdown during scanning.

└──▷ GET THIS VERSION
$ git clone --branch 2.1.3 https://github.com/rbsec/sslscan.git
# already have the repo? check out this version:
$ git checkout 2.1.3
└──▷ USE IT
Run a silent scan to suppress all output except errors, useful for scripting or background tasks.
shell
sslscan --quiet <target_host>
  • Enable --quiet flag in sslscan 2.1.3 CLI for quiet shutdown of the scan process.

1 detail in Everything

Was this useful?

caido

v0.30.1

Adds upstream proxy support to Caido

└──▷ GET THIS VERSION
$ git clone --branch v0.30.1 https://github.com/caido/caido.git
# already have the repo? check out this version:
$ git checkout v0.30.1
  • Add upstream proxy support

1 detail in Everything

Was this useful?
◆  Software Supply Chain Security

Apiiro

🔇🙈🙊 Introducing Secrets Exclusion 3 releases · 2024-01-04 → 2024-01-30 Stable

Apiiro maps an application's architecture and risk graph and runs AI-SAST, SCA, secrets, API and threat-modeling checks on AI- and human-written code.

Apiiro introduces secrets exclusion to filter test tokens by path or pattern

  • Allows excluding specific secrets from generating alerts and dashboard risks based on file paths, patterns, applications, or repositories.

1 detail in Everything

2 more releases in this issue · 2024-01-04 → 2024-01-30
🌲 Dependency path view for clearer visibility Stable

Apiiro adds dependency path visibility and REST APIREST APIA web API design style where clients interact with resources over HTTP using standard methods like GET, POST, and DELETE, giving cyber tools a predictable, language-agnostic way to integrate with external services. access for transitive vulnerabilities

  • Adds a new UI view showing all dependency paths to a vulnerable package and which top-level dependencies contain vulnerable sub-dependencies.

1 detail in Everything

💡 Meet the new Explorer! Stable

Introduces the Apiiro Risk Graph Explorer for querying attack surfaceattack surfaceThe exposed systems, interfaces and access points an attacker could try to use. It includes internet-facing services as well as identities, software and other reachable resources. risk via a new interface.

  • Adds the Apiiro Risk Graph Explorer interface to ask and answer complex security questions about contributors, behavior, and risk.

1 detail in Everything

Was this useful?

Anchore syft

v0.101.0 2 releases · 2024-01-05 → 2024-01-17 Stable

Adds syft cataloger list command and ability to enable/disable individual catalogers via CLI flags

└──▷ GET THIS VERSION
$ git clone --branch v0.101.0 https://github.com/anchore/syft.git
# already have the repo? check out this version:
$ git checkout v0.101.0
└──▷ TRY IT
View all available catalogers and their default states before running a scan.
$ syft cataloger list
  • Adds cataloger list subcommand to display available catalogers
  • Adds --cataloger.<name>.enabled=true|false flags to control which catalogers run during a scan

2 details in Everything

1 more release in this issue · 2024-01-05 → 2024-01-17
v0.100.0 Stable

Adds OpenSSL binary matcher, extended ErLang parsing, and extensible binary cataloguers in v0.100.0

└──▷ GET THIS VERSION
$ git clone --branch v0.100.0 https://github.com/anchore/syft.git
# already have the repo? check out this version:
$ git checkout v0.100.0
  • OpenSSL binary matcher enables detection of OpenSSL installations from raw binaries
  • ErLang parser gains additional functionality for enhanced language coverage

2 details in Everything

Was this useful?

LavaMoat

lavamoat-tofu-v7.1.0 2 releases · 2024-01-18 Stable

LavaMoat tofu v7.1.0 introduces TypeScript type definitions for improved development experience.

└──▷ GET THIS VERSION
$ git clone --branch lavamoat-tofu-v7.1.0 https://github.com/lavamoat/lavamoat.git
# already have the repo? check out this version:
$ git checkout lavamoat-tofu-v7.1.0
  • Provides TypeScript type definitions for the tofu module to enable static analysis and IDE support

1 detail in Everything

1 more release in this issue · 2024-01-18
lavamoat-core-v15.1.0 Stable

lavamoat-core-v15.1.0 ships TypeScript types

└──▷ GET THIS VERSION
$ git clone --branch lavamoat-core-v15.1.0 https://github.com/lavamoat/lavamoat.git
# already have the repo? check out this version:
$ git checkout lavamoat-core-v15.1.0
  • lavamoat-core now ships with TypeScript type definitions.

1 detail in Everything

Was this useful?

Crash Override Chalk

v0.3.1 5 releases · 2024-01-18 → 2024-01-23 Stable

Chalk v0.3.1 adds arm64 Linux support and removes --no-api-login flag

└──▷ GET THIS VERSION
$ git clone --branch v0.3.1 https://github.com/crashappsec/chalk.git
# already have the repo? check out this version:
$ git checkout v0.3.1
└──▷ BREAKING ON UPGRADE
  • !The --no-api-login flag is removed; passing it will now fail or be ignored as the setup flow no longer requires interactive OIDCOIDCOpenID Connect, a sign-in protocol built on OAuth 2.0. An application uses identity information from a trusted provider instead of maintaining a separate password for each user. authentication.
4 more releases in this issue · 2024-01-18 → 2024-01-23
v0.3.0 Stable

Chalk v0.3.0 adds presign sink, JWTJWTAn open standard (RFC 7519) for encoding claims as a signed, optionally encrypted JSON object passed between parties. Cyber tools use it to verify identity and permissions without querying a central session store./Basic auth for sinks, git context support, and new metadata fields.

└──▷ GET THIS VERSION
$ git clone --branch v0.3.0 https://github.com/crashappsec/chalk.git
# already have the repo? check out this version:
$ git checkout v0.3.0
  • Adds presign sink to allow uploads to S3 without hard-coded credentials in the chalk configuration
  • Adds JWT/Basic auth authentication options to sinks
  • Added support for git context for docker build commands
  • Added new git metadata fields about authored commit, committer, and tag
  • Added github_json_group for printing chalk marks in GitHub ActionsGitHub ActionsGitHub's built-in CI/CD system that runs automated workflows triggered by repository events, letting cyber tools automate testing, building, and releasing without managing separate pipeline infrastructure.
+3 more show less
  • Added docker.wrap_cmd to allow to customize whether CMD should be wrapped when ENTRYPOINT is missing in Dockerfile
  • Added minimal AWS lambda metadata collection. It includes only basic information about lambda function such as its ARN and its runtime environment
  • Added experimental support for detection of technologies used at chalk and runtime (programming languages, databases, servers, etc.)

8 details in Everything

└──▷ BREAKING ON UPGRADE
  • !_OP_CLOUD_METADATA is now a JSON object vs a string containing JSON data. In addition cloud metadata is now nested to allow to include more metadata about running cloud instances
  • !The signing key backup service has been completely overhauled and no longer uses the OIDCOIDCOpenID Connect, a sign-in protocol built on OAuth 2.0. An application uses identity information from a trusted provider instead of maintaining a separate password for each user. Device Code Flow to authenticate to the API. Instead a pre-generated API access tokenaccess tokenA credential that authorizes a client to use a service or API. It usually has limited permissions and a lifetime; anyone holding it may be able to use those permissions. is passed in chalk profile and that value is used as the bearer tokenbearer tokenA credential that grants access to whoever presents it, without a separate proof of possession. Protecting the token matters because a stolen copy can be used by someone else.. The setup command still generates keys for signing but will no longer prompt with a QR code to authenticate to the API.
  • !As a result of the above the login and logout commands have been removed.
  • !CHALK_API_KEY renamed to CHALK_DATA_API_KEY
  • !use_secret_manager renamed to use_signing_key_backup_service
  • !secret_manager_url renamed to signing_key_backup_service_url
  • !secret_manager_timeout renamed to signing_key_backup_service_timeout
v0.2.2 Stable

Chalk v0.2.2 adds --multi-platform flag for docker multi-platform builds

└──▷ GET THIS VERSION
$ git clone --branch v0.2.2 https://github.com/crashappsec/chalk.git
# already have the repo? check out this version:
$ git checkout v0.2.2
v0.2.0 Stable

Chalk v0.2.0 adds module system, cloud metadata collection, and chalk login/logout commands

└──▷ GET THIS VERSION
$ git clone --branch v0.2.0 https://github.com/crashappsec/chalk.git
# already have the repo? check out this version:
$ git checkout v0.2.0
  • chalk help and chalk help <command> rendering engine is now functional
  • chalk login command for OIDCOIDCOpenID Connect, a sign-in protocol built on OAuth 2.0. An application uses identity information from a trusted provider instead of maintaining a separate password for each user. authentication with the secret manager
  • chalk logout command to clear auth session
  • Initial metadata collection for GCP and Azure cloud providers via new metadata keys
  • docker.wrap_entrypoint = true config key to wrap Docker entrypoints when USER directive is present

5 details in Everything

v0.1.2 Stable

First open source release of Chalk with automatic signing, chalk exec runtime beaconing, and new data collection modules.

└──▷ GET THIS VERSION
$ git clone --branch v0.1.2 https://github.com/crashappsec/chalk.git
# already have the repo? check out this version:
$ git checkout v0.1.2
└──▷ TRY IT
Initialize Chalk for automatic signing using the hosted secret service and generate a keypair
$ chalk setup
Run a container with Chalk to enable runtime beaconing and periodic heartbeat reports
$ chalk exec my-image
Configure Chalk to use an existing secret via environment variable instead of the Crash Override API
$ chalk setup --no-api-login
  • Adds the chalk setup command to initialize secrets, generate keypairs via Crash Override's secret service, and configure automatic signing
  • Adds the --no-api-login flag to chalk setup for users who provide their own secret via environment variable instead of using the hosted service
  • Adds the chalk exec command to inject beacon data into container entry points for runtime metadata collection
  • Enables periodic heartbeat reports from chalk exec to collect metadata about running workloads after startup
  • Adds an AWS IMDSv2 collection module with associated metadata keys for cloud environment data
+3 more show less
  • Adds a proc file system collection module for capturing process-level metadata
  • Injects environment variables into docker images in addition to the previously supported labels
  • Places ELFELFThe standard binary format for executables, shared libraries, and object files on Linux and most Unix-like systems, giving cyber tools a predictable structure to parse, instrument, or analyze compiled code. Chalk marks into their own ELF section so they survive strip operations

8 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Config file format changed; existing preview configuration files may require migration
Was this useful?

Sigstore cosign

v2.2.3

cosign v2.2.3 adds OpenVEXOpenVEXAn open specification and Go library, maintained by the OpenVEX community, for expressing VEX (Vulnerability Exploitability eXchange) statements in a standard JSON format so cyber tools can automate vulnerability triage. predicate support and optional Rekor upload for attestations.

└──▷ GET THIS VERSION
$ git clone --branch v2.2.3 https://github.com/sigstore/cosign.git
# already have the repo? check out this version:
$ git checkout v2.2.3
└──▷ USE IT
Create an attestation using the new OpenVEX format.
shell
cosign attest --predicate <predicate_file> --type openvex <image>
Upload an attestation to Rekor during creation.
shell
cosign attest --upload-rekor=true <flags> <image>
  • Add support for OpenVEX predicate type
  • Allow for option in cosign attest and attest-blob to upload attestation as supported in Rekor

2 details in Everything

Was this useful?
◆  WAF, Bot & API Protection

Akto

v1.34.10 11 releases · 2024-01-05 → 2024-01-24 Stable

Akto discovers APIs, MCP servers and AI agents, tests and red-teams them, and enforces runtime guardrails and posture management.

Akto v1.34.10 adds JWTJWTAn open standard (RFC 7519) for encoding claims as a signed, optionally encrypted JSON object passed between parties. Cyber tools use it to verify identity and permissions without querying a central session store. bypass and cookie expiry tests via the test editor

└──▷ GET THIS VERSION
$ git clone --branch v1.34.10 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.34.10
└──▷ HOW TO FIND IT
Run a new test case to detect JWT auth bypass via JWK header injection within the Akto service UI.
📍Navigate to Test Editor › Add New Test › Select 'jwt authentication bypass via jwk header injection' as the test type.
Create a test case specifically designed to check if cookie expiration logic is correctly validated during API requests.
📍Navigate to Test Editor › Add New Test › Select cookie expiry tests from the available templates.
  • jwt authentication bypass via jwk header injection test now available in the test editor.
  • jwt authentication bypass via kid param injection test now available in the test editor.

2 details in Everything

10 more releases in this issue · 2024-01-05 → 2024-01-24
v1.34.9 Stable

Akto v1.34.9 introduces the ability to create custom collections

└──▷ GET THIS VERSION
$ git clone --branch v1.34.9 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.34.9
└──▷ HOW TO FIND IT
Create a new collection in the Akto interface to group specific API endpoints for focused monitoring.
📍In the Akto UI, navigate to the Collections section and select Create Custom Collection.
v1.34.8 Stable

Test editor now supports storing response metrics and comparing them across nodes

└──▷ GET THIS VERSION
$ git clone --branch v1.34.8 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.34.8
  • test editor stores avg, min, max, median response times and length for requests
  • test editor allows comparison of response metrics across multiple nodes
  • test editor accepts multiplication expressions (e.g. 2 * 3) as numeric values

3 details in Everything

v1.34.7 Stable

Akto v1.34.7 adds custom collections allowing endpoints from multiple sources grouped by method

└──▷ GET THIS VERSION
$ git clone --branch v1.34.7 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.34.7
└──▷ HOW TO FIND IT
Create a cross-collection custom collection grouped by HTTP method for focused review.
📍In the Akto console, create a new custom collection and select endpoints from multiple existing collections, grouping them by method.
  • Users can create custom collections by adding API endpoints from multiple collections as well as grouped on methods

1 detail in Everything

v1.34.6 Stable

Akto v1.34.6 adds dependency graph building from traffic data and improved test editor search

└──▷ GET THIS VERSION
$ git clone --branch v1.34.6 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.34.6
└──▷ HOW TO FIND IT
Navigate to the test editor and use the improved search feature to find specific tests.
📍In the Akto UI, go to Tests › Test Editor and utilize the enhanced search bar to filter your test suite.
  • Added dependency graph capability to build a dependency graph from traffic data
  • Improved search functionality in the test editor UI

2 details in Everything

v1.34.5 Stable

Adds token replace functionality to replace tokens in URLs

└──▷ GET THIS VERSION
$ git clone --branch v1.34.5 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.34.5
v1.34.4 Stable

Adds execute block for test request building and UI-specific token replacement tests

└──▷ GET THIS VERSION
$ git clone --branch v1.34.4 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.34.4
└──▷ HOW TO FIND IT
Use the execute block to dynamically construct API requests for complex testing scenarios.
📍execute { // New features allow dynamic request building }
Leverage UI-specific tests to inject or modify tokens directly in URLs during testing.
📍UI specific tests: replace/insert token in URL
  • execute block now supports new features for building test requests
  • New UI specific tests allow replacing or inserting tokens within a URL

2 details in Everything

v1.34.3 Stable

Adds the ability to use a wordlist defined as an array

└──▷ GET THIS VERSION
$ git clone --branch v1.34.3 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.34.3
  • Added functionality to use wordlist within an array

1 detail in Everything

v1.33.2 Stable

Akto v1.33.2 adds multi-request YAML tests, regex body replacement, schema match checks, and YAML triggers

└──▷ GET THIS VERSION
$ git clone --branch v1.33.2 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.33.2
  • Adds the ability to run multiple requests in a single yaml test template

1 detail in Everything

v1.33.0 Stable

Adds risk score for APIs to help prioritize which endpoints need attention

└──▷ GET THIS VERSION
$ git clone --branch v1.33.0 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.33.0
  • Adds risk score for APIs by @avneesh-akto in https://github.com/akto-api-security/akto/pull/800

1 detail in Everything

v1.32.8 Stable

Akto v1.32.8 adds custom test libraries, GitHub CI/CD integration, and test run deletion

└──▷ GET THIS VERSION
$ git clone --branch v1.32.8 https://github.com/akto-api-security/akto.git
# already have the repo? check out this version:
$ git checkout v1.32.8
  • Adds support for custom test libraries to extend scanning capabilities
  • Adds GitHub CI/CD comments and GitHub checks for automated workflow integration
  • Adds a feature to delete test runs

3 details in Everything

Was this useful?

Fastly

Add Notification Service API 7 releases · 2024-01-08 → 2024-01-17 Stable

Fastly adds a dedicated API surface for notification management.

  • Programmatic control over notifications via new API endpoints

1 detail in Everything

6 more releases in this issue · 2024-01-08 → 2024-01-17
CLI v10.8.0 Stable

Fastly CLI v10.8.0 adds version subcommand to display installed CLI version.

Next-Gen WAF for .NET Core 1.4.0 Stable

Fastly NGWAFNGWAFA next-generation web application firewall that inspects HTTP traffic at the application layer, using behavioral analysis and contextual rules rather than pure signature matching to block attacks like SQLi and XSS. .NET Core adds .NET 8 target framework and application response header modification

  • Adds support for modifying application response headers

1 detail in Everything

Updated CMDEXE signal detection Stable

Improved detection capabilities for CMDEXE and SQLI signals.

  • Improved CMDEXE signal detection accuracy and coverage.
  • Improved SQLI signal detection accuracy and coverage.

2 details in Everything

JavaScript SDK 3.8.0 Stable

JavaScript SDK 3.8.0 adds manual framing headers and backend name getter to Request/Response objects.

  • Adds manualFramingHeaders option to RequestInit and ResponseInit, and new methods Request.prototype.setManualFramingHeaders and Response.prototype.setManualFramingHeaders for controlling HTTP framing headers
  • Adds Request.prototype.backend getter to retrieve the name of the backend assigned to a request
  • Allows URL as input on fetch() in TypeScript typings to improve Node.js compatibility

3 details in Everything

Add Alerts API Stable

Fastly adds Alerts API documentation

Update metrics parameter to remove limit of ten values Stable

Fastly API removes the 10-value limit on the metrics parameter for Domain and Origin Metrics queries

  • metrics parameter in Domain Metrics and Origin Metrics endpoints no longer restricted to 10 values

1 detail in Everything

Was this useful?

Bunkerity BunkerWeb

v1.5.5

BunkerWeb v1.5.5 adds 2FA to the Web UI, Anonymous reporting, Redis Sentinel support, and configurable reverse proxy includes.

└──▷ GET THIS VERSION
$ git clone --branch v1.5.5 https://github.com/bunkerity/bunkerweb.git
# already have the repo? check out this version:
$ git checkout v1.5.5
└──▷ HOW TO FIND IT
Inject custom Nginx include directives into reverse proxy blocks via environment variable.
📍REVERSE_PROXY_INCLUDES=/etc/bunkerweb/custom-includes/*.conf docker compose up -d
Enable Two-Factor Authentication for the BunkerWeb Web UI administrators.
📍In the BunkerWeb UI, navigate to Settings › Users and enable 2FA for your account.
  • Adds REVERSE_PROXY_INCLUDES environment variable to manually inject include directives into reverse proxy configurations
  • Adds 2FA support for authentication in the BunkerWeb Web UI
  • Adds Anonymous reporting feature for system health statistics
  • Adds Redis Sentinel support for high-availability Redis deployments

4 details in Everything

Was this useful?

Wallarm

Instant Notifications on Shadow, Zombie, and Orphan APIs 2 releases · 2024-01-17 → 2024-01-18 Stable

Instant notifications for detected Shadow, Zombie, and Orphan (Rogue) APIs via SIEMSIEMSecurity information and event management, collecting logs from many systems and correlating events to find suspicious activity. Analysts use it to investigate alerts and incidents./SOARSOARSecurity orchestration, automation and response, coordinating incident workflows across tools. Playbooks can gather evidence, assign work or carry out approved response actions./messaging integrations

1 more release in this issue · 2024-01-17 → 2024-01-18
Introducing Dark Theme – A Delight for Your Eyes! Stable

Adds a Dark Theme option to the Wallarm user interface accessible via the profile menu.

Was this useful?
◆  Secrets Detection & Management

GitGuardian SaaS

January 29, 2024 3 releases · 2024-01-09 → 2024-01-29 Stable

GitGuardian SaaS adds Square Token detector and configurable CSV export separators.

  • Adds Square Token detection engine (v2.105)
  • Exporting CSV secret incidents now supports configurable separator (comma or tab)

2 details in Everything

2 more releases in this issue · 2024-01-09 → 2024-01-29
January 15, 2024 Stable

GitGuardian SaaS upgrades secrets detection engine to v2.103 adding four new detectors.

  • Upgrades secrets detection engine to version 2.103
  • Adds detection for CircleCI Project Token
  • Adds detection for Claude API Key
  • Adds detection for Grafana Service Account Token With Host
  • Adds detection for Klaviyo API Key

5 details in Everything

January 9, 2024 Stable

GitGuardian adds hsml_hash to API payloads, CSV columns for secret incidents, and Ignores IaCIaCInfrastructure as Code: the practice of defining and provisioning compute infrastructure through machine-readable config files rather than manual processes, giving cyber tools repeatable, version-controlled environment setup. tag.

  • Adds hsml_hash field to the secret incident payload for Has My Secret Leaked integration
  • Adds element_url and author_name columns to the secret occurrence CSV report
  • Adds Ignored tag in IaC Security for ggshield-ignored incidents

3 details in Everything

Was this useful?

Truffle Security trufflehog

v3.66.3 6 releases · 2024-01-14 → 2024-01-31 Stable

TruffleHog finds, verifies, and analyzes leaked credentials across Git, chat, wikis, cloud storage, and more

Adds --git-wiki flag to scan GitHub wikis and updates Fly.io protocol buffers

└──▷ GET THIS VERSION
$ git clone --branch v3.66.3 https://github.com/trufflesecurity/trufflehog.git
# already have the repo? check out this version:
$ git checkout v3.66.3
  • Updates Fly.io proto definitions for improved credential detection in Fly.io infrastructure

1 detail in Everything

5 more releases in this issue · 2024-01-14 → 2024-01-31
v3.66.2 Stable

Adds temporary file diff scanning and updates the template detector

└──▷ GET THIS VERSION
$ git clone --branch v3.66.2 https://github.com/trufflesecurity/trufflehog.git
# already have the repo? check out this version:
$ git checkout v3.66.2
  • Updates the template detector to include tristate verification logic.

1 detail in Everything

v3.66.0 Stable

Adds Azure Function Key and Search Admin/Query Key detectors to Trufflehog.

└──▷ GET THIS VERSION
$ git clone --branch v3.66.0 https://github.com/trufflesecurity/trufflehog.git
# already have the repo? check out this version:
$ git checkout v3.66.0
  • azurefunctionkey detector detects Azure Function keys
  • azuresearchadminkey detector detects Azure Search admin keys
  • azuresearchquerykey detector detects Azure Search query keys

3 details in Everything

v3.65.0 Stable

New detectors for Azure DevOps PATPATA personal access token, a credential used by scripts and integrations instead of a user's password. Its permissions and expiry depend on the service issuing it., Google OAuth2OAuth2An open authorization framework (RFC 6749) that lets a service grant limited access to a user's resources on another service without exposing credentials, giving cyber tools a standard way to authenticate against third-party APIs. token, and Yelp; filesystem walk enumeration

└──▷ GET THIS VERSION
$ git clone --branch v3.65.0 https://github.com/trufflesecurity/trufflehog.git
# already have the repo? check out this version:
$ git checkout v3.65.0
  • Adds azuredevopspersonalaccesstoken detector to scan for Azure DevOps Personal Access TokensPersonal Access TokensA personal access token, a credential used by scripts and integrations instead of a user's password. Its permissions and expiry depend on the service issuing it.
  • Adds googleoauth2token detector to scan for Google OAuth2 tokens
  • Enables filesystem source enumeration to walk directories during scanning

3 details in Everything

v3.64.0 Stable

Adds Prometheus hook execution time metrics to TruffleHog v3.64.0

└──▷ GET THIS VERSION
$ git clone --branch v3.64.0 https://github.com/trufflesecurity/trufflehog.git
# already have the repo? check out this version:
$ git checkout v3.64.0
v3.63.9 Stable

Adds --verify to restrict verification to custom verifiers and supports path files for filesystem include/exclude patterns

└──▷ GET THIS VERSION
$ git clone --branch v3.63.9 https://github.com/trufflesecurity/trufflehog.git
# already have the repo? check out this version:
$ git checkout v3.63.9
└──▷ USE IT
Scan only using custom verifiers defined in your pipeline, ignoring Truffle Security's default checks.
shell
trufflehog filesystem /data --custom-verifier-only
Define which paths to include or exclude for large codebases using dedicated files.
shell
trufflehog filesystem /repo --include-paths ./paths/include.txt --exclude-paths ./paths/exclude.txt
  • Provides --custom-verifier-only flag to skip default credential verification and only use user-provided custom verifiers
  • Adds support for file-based include and exclude paths in filesystem scans via new config keys

2 details in Everything

Was this useful?

GitGuardian Self-Hosted

2024.1.1

GitGuardian 2024.1.1 adds 8 new secret detectors, source criticality prioritization, Chainguard images, and SMTPSMTPThe application-layer protocol used to send email between servers and from clients to servers; cyber tools use it to relay alerts, phishing simulations, or exfiltrated data over standard mail infrastructure./SMTP TLS support.

└──▷ TRY IT
Ensure the required PostgreSQL extension is present before upgrading to avoid downtime.
$ psql -U gitguardian -d gitguardian -c "CREATE EXTENSION IF NOT EXISTS btree_gin;"
  • Adds base64_aws_iam_key, base64_aws_ses_key, readme_api_key, tailscale_api_key, tailscale_oauth_key, tailscale_preauth_key, tailscale_scim_key, and tailscale_webhook_key to the secrets detection engine v2.102
  • Adds a new source-level parameter for prioritizing Secret incidents in GitGuardian Self-Hosted
  • Switches default images to Chainguard-based builds (KOTS admin 1.104.4 and Replicated SDK 1.0.0-beta.12) on the new architecture
  • Adds support for unauthenticated SMTP server configuration
  • Updates KOTS preflights to support TLS for Redis and PostgreSQL connections

5 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Requires the btree_gin PostgreSQL extension to be installed on the database before upgrading, or the upgrade will fail.
Was this useful?

Bitnami Sealed Secrets

v0.25.0

Sealed Secrets v0.25.0 adds proxy environment variable support for certificate fetching

└──▷ GET THIS VERSION
$ git clone --branch v0.25.0 https://github.com/bitnami-labs/sealed-secrets.git
# already have the repo? check out this version:
$ git checkout v0.25.0
└──▷ TRY IT
Use this to allow the controller or client to reach the certificate endpoint through a corporate HTTP proxy.
$ export HTTPS_PROXY=http://proxy.internal:8080 && kubeseal --fetch-cert --controller-namespace=kube-system
  • Supports fetching the certificate URL via proxy environment variables (HTTP_PROXY, HTTPS_PROXY, etc.)

1 detail in Everything

Was this useful?
Reverse Engineering, Malware & Forensics
◆  Digital Forensics & Incident Response

ElcomSoft

Supporting Sage 50 Accounting Canadian Edition 2 releases · 2024-01-03 → 2024-01-17 Stable

ASAPR v2.78 adds instant password reset for Sage 50 Accounting Canadian Edition

  • Extends ASAPR's recovery capabilities to include BLB, MUD, and ADF/PAD files associated with Sage 50 (Peachtree) Accounting 2023/2024 editions.

1 detail in Everything

1 more release in this issue · 2024-01-03 → 2024-01-17
Low-level extraction of iOS 16.6.1 Stable

iOS Forensic Toolkit 8.52 adds low-level extraction support for iOS 16.5.1 through 16.6.1 on A11+ chips.

  • Adds agent-based low-level extraction for iOS 16.5.1, 16.6, and 16.6.1 on devices with A11 Bionic and newer chips
  • Expands agent-based low-level extraction to include iPad models with A12X/A12Z Bionic and newer chips (including M1 and M2)

2 details in Everything

Was this useful?

osdfir-infrastructure

yeti-1.0.0 3 releases · 2024-01-12 → 2024-01-17 Stable

Yeti Helm chart for Kubernetes deployments reaches v1.0.0 with GCP project parameter support.

└──▷ GET THIS VERSION
$ git clone --branch yeti-1.0.0 https://github.com/google/osdfir-infrastructure.git
# already have the repo? check out this version:
$ git checkout yeti-1.0.0
2 more releases in this issue · 2024-01-12 → 2024-01-17
yeti-0.1.0 Stable

Adds a Helm chart for deploying Yeti on Kubernetes.

└──▷ GET THIS VERSION
$ git clone --branch yeti-0.1.0 https://github.com/google/osdfir-infrastructure.git
# already have the repo? check out this version:
$ git checkout yeti-0.1.0
osdfir-infrastructure-0.3.4 Stable

osdfir-infrastructure 0.3.4 adds a Yeti Helm chart and integration test script for Kubernetes DFIR deployments.

└──▷ GET THIS VERSION
$ git clone --branch osdfir-infrastructure-0.3.4 https://github.com/google/osdfir-infrastructure.git
# already have the repo? check out this version:
$ git checkout osdfir-infrastructure-0.3.4
Was this useful?

bulk-extractor

v2.1.0

bulk_extractor v2.1 adds stable BE2 release with RE2RE2A regular-expression engine developed by Google that guarantees linear-time matching, preventing the catastrophic backtracking that plagues PCRE-style engines and making it safe to run untrusted patterns. regex engine and configurable scanner toggles.

└──▷ GET THIS VERSION
$ git clone --branch v2.1.0 https://github.com/simsong/bulk_extractor.git
# already have the repo? check out this version:
$ git checkout v2.1.0
└──▷ USE IT
Run bulk_extractor with an open-ended regex that previously caused hangs.
shell
bulk_extractor -F '[a-z]*@company.com' disk.img
Re-enable the scan_outlook scanner which is off by default.
shell
bulk_extractor -eoutlook disk.img
  • -F flag now supports open-ended regular expressions without hanging due to the switch to Google's RE2 regex compiler
  • -eoutlook CLI flag re-enables the scan_outlook scanner, which is disabled by default in v2.1
  • -ehiberfile CLI flag re-enables the scan_hiberfile scanner, which is disabled by default in v2.1

3 details in Everything

└──▷ BREAKING ON UPGRADE
  • !scan_outlook and scan_hiberfile scanners are now disabled by default and must be explicitly enabled via command-line flags
  • !scan_aes no longer scans for 192-bit AES keys by default, though this behavior can be re-enabled
Was this useful?

Volatility 3

v2.5.2

Volatility 3 v2.5.2 adds Amazon S3 and Google Cloud Storage layers, new plugins, and ELFELFThe standard binary format for executables, shared libraries, and object files on Linux and most Unix-like systems, giving cyber tools a predictable structure to parse, instrument, or analyze compiled code. dumping

└──▷ GET THIS VERSION
$ git clone --branch v2.5.2 https://github.com/volatilityfoundation/volatility3.git
# already have the repo? check out this version:
$ git checkout v2.5.2
  • Adds s3 layer for Amazon S3 support
  • Adds gcs layer for Google Cloud Storage support
  • Adds linux.vmayarascan plugin
  • Adds windows.mftscan.ads plugin
  • Enables dumping of Elf files in the elfs plugin

5 details in Everything

Was this useful?

UAC

v2.8.0

UAC v2.8.0 adds the offline collection profile and new data collection rules for multiple platforms

└──▷ GET THIS VERSION
$ git clone --branch v2.8.0 https://github.com/tclahr/uac.git
# already have the repo? check out this version:
$ git checkout v2.8.0
└──▷ USE IT
Perform a collection on an offline disk image using the new profile.
shell
uac --profile offline /path/to/disk_image
  • Adds the offline profile to profiles/offline.yaml for offline disk image collections
  • Adds --debug flag behavior that preserves the temporary uac-data.tmp directory in the destination
  • Adds support for Box log file collection via files/applications/box.yaml on macOS
  • Adds support for wget HSTSHSTSAn HTTP response header, standardized in RFC 6797, that instructs browsers to contact a site over HTTPS only for a declared period, preventing protocol-downgrade and cookie-hijacking attacks. cache file collection via files/applications/wget.yaml on supported platforms
  • Adds support for package table of contents files via files/packages/pkg_contents.yaml on OpenBSD
+7 more show less
  • Adds support for user GUIGUIA graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. shortcut (.desktop) files via files/system/desktop.yaml on FreeBSD, Linux, NetBSD, and OpenBSD
  • Adds exclusion of master password hash files (master.passwd, spwd.db) in files/system/etc.yaml on FreeBSD, NetBSD, NetScaler, and OpenBSD
  • Adds exclusion of group shadow files (gshadow, gshadow-) in files/system/etc.yaml on Linux
  • Adds support for kernel IPv6IPv6The current version of the Internet Protocol, standardized by the IETF, using 128-bit addresses to replace the exhausted IPv4 space. Cyber tools target it because modern networks run dual-stack or IPv6-only. neighbor cache via live_response/network/ndp.yaml on FreeBSD, NetBSD, and OpenBSD
  • Adds support for complete nftables rulesets via live_response/network/nft.yaml on Linux
  • Adds support for running VM information via live_response/vms/vmctl.yaml on OpenBSD
  • Updates collection support for Flatpak versions of Brave, Chrome, Edge, Opera, and Vivaldi browsers on Linux

12 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The box_drive.yaml file under files/applications/ has been renamed to box.yaml, which may break scripts referencing the old path.
Was this useful?

Fox-IT Dissect

3.12

Dissect 3.12 adds FortiOS platform support, JFFS filesystem mounting, and PuTTY/Citrix/SchedLgU plugins

└──▷ GET THIS VERSION
$ git clone --branch 3.12 https://github.com/fox-it/dissect.git
# already have the repo? check out this version:
$ git checkout 3.12
  • Adds FortiOS platform support as a Linux sub-OS
  • Adds PuTTY plugin in the apps/ssh section
  • Adds Citrix Netscaler webserver logs plugin in the apps/webservers section
  • Adds SchedLgU plugin to parse SchedLgU.txt logs in the os/windows/log section
  • Adds fuse3fuse3A Linux FUSE library (version 3) maintained by the libfuse project that lets userspace programs implement filesystems without kernel code, giving cyber tools a way to mount custom or virtual filesystems safely. support to target-mount

5 details in Everything

Was this useful?
◆  Reverse Engineering

imhex

v1.32.2

ImHex v1.32.2 adds a CLI hexdump/demangle mode, Markdown report exports, pattern language write-back, and a minimal layout.

└──▷ GET THIS VERSION
$ git clone --branch v1.32.2 https://github.com/WerWolv/ImHex.git
# already have the repo? check out this version:
$ git checkout v1.32.2
└──▷ USE IT
Extract a raw hexdump of a binary file from the command line.
shell
imhex --hexdump /path/to/binary.bin
Demangle C++ symbols in a file and save the output directly to stdout.
shell
imhex --demangle /path/to/lib.so
  • Adds --hexdump and --demangle CLI subcommands for scripted analysis
  • Enables exporting bookmarks, patterns, and data info to Markdown via the new Markdown reports feature
  • Supports writing back to the source file when pattern code includes #pragma allow_edits
  • Introduces a minimal layout that hides non-essential UI elements for a simplified editing view

4 details in Everything

Was this useful?

gef

2024.01

GEF 2024.01 adds target-remote support, xinfo C++ symbols, heap summary type resolution, min/max/count filters, and memory map provider.

└──▷ GET THIS VERSION
$ git clone --branch 2024.01 https://github.com/hugsy/gef.git
# already have the repo? check out this version:
$ git checkout 2024.01
  • Adds basic support for the target remote command via gef-remote to connect to a remote GDB stub
  • Adds C++ symbol support in the xinfo command
  • Adds config setting to override libc version for heap analysis
  • Adds option to resolve type information when dumping heap summary
  • Adds memory map provider capability
+2 more show less
  • Adds min-size and max-size filters to the heap chunks command
  • Adds count option to the heap chunks command to limit chunks processed

7 details in Everything

Was this useful?

HyperDbg

v0.8.0

HyperDbg v0.8.0 adds !mode event command and preactivate debugger mode command.

└──▷ GET THIS VERSION
$ git clone --branch v0.8.0 https://github.com/HyperDbg/HyperDbg.git
# already have the repo? check out this version:
$ git checkout v0.8.0
  • Adds !mode event command to detect kernel-to-user and user-to-kernel transitions
  • Adds preactivate command to support initializing special functionalities in the Debugger Mode

2 details in Everything

Was this useful?

CHIPSEC

1.12.8

Adds CET module for chipset security telemetry and new verbose PCIPCIA hardware bus standard that connects peripheral devices to a computer's motherboard; cyber tools targeting hardware-level forensics or memory analysis use it to access device registers and DMA regions directly. device printing.

└──▷ GET THIS VERSION
$ git clone --branch 1.12.8 https://github.com/chipsec/chipsec.git
# already have the repo? check out this version:
$ git checkout 1.12.8
  • Add CET module: Enables Chipset Error Tracking (CET) support in CHIPSEC

1 detail in Everything

Was this useful?
Network Security
◆  Firewalls & Network Defense

Palo Alto Networks

Prisma Cloud Compute Edition: 32.02 (Build 32.02.127) 4 releases · 2024-01 Stable

New agentless scanning default for non-running hosts and new API query parameters for imported cloud accounts.

  • Enables agentless scanning of non-running hosts by default for all newly added accounts
  • Adds external and autoImported query parameters to the Get All Credentials endpoint to list credentials imported from the Prisma Cloud platform Accounts page
  • Adds nodeJSModuleType request body field (accepts commonjs or ecmascript) to the Download Serverless Layer Bundle endpoint

3 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The Code Repository Scanning feature is removed, eliminating support for endpoints such as /api/\<vVersion>/coderepos (GET), /api/\<vVersion>/coderepos/scan (POST), and /api/\<vVersion>/settings/coderepos
  • !Defender versions prior to v30.00 are no longer supported and will disconnect; you must upgrade to at least v30.00 before upgrading the Console to v32.00
  • !Console upgrades from v22.00 now require an intermediate upgrade to v30.00 before proceeding to v31.00
3 more releases in this issue · 2024-01
Prisma Cloud Compute Edition: 32.01 (Build 32.01.128) Stable

Prisma Cloud Compute 32.01 adds agentless scanning for encrypted Azure volumes and OpenShift 4.14 support.

  • Adds Agentless Scanning support of encrypted volumes in Azure for hub account mode
  • Adds Agentless Scanning hub account mode for Azure
  • Adds Vulnerability Management support for Debian Bullseye and Bookworm Security fixes
  • Adds Operating System Support for OpenShift 4.14
  • Enables Vulnerability Management detection of IBM Java version numbers (v1.8 and earlier) during vulnerability management

5 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The AccountID macro is deprecated in alerts, removing the AccountID field from Webhook, AWS SQS, Prisma Cortex Alert, and Splunk destinations
  • !The Cluster macro is deprecated in alerts, removing the Cluster field from Webhook, AWS SQS, Prisma Cortex Alert, and Splunk destinations
Prisma Cloud Compute Edition: 33.03 (Build 33.03.138) Stable

Prisma Cloud Compute 33.03 adds module-aware RHELRHELRed Hat Enterprise Linux, a commercially supported Linux distribution maintained by Red Hat, chosen by cyber tools for its long support lifecycle, certified hardware compatibility, and enterprise deployment prevalence./NuGetNuGetMicrosoft's package manager for .NET, hosting a public registry of reusable libraries so tools can pull in dependencies without bundling or manually maintaining third-party code. vulnerability reporting, fsmon_v2 prevent action, and Defender last-connected logging.

  • Adds last-connected epoch timestamp field to Defender stats logs to track connection history
  • Enhances vulnerability reporting for Red Hat Enterprise Linux (RHEL) 8 and 9 with module and stream metadata
  • Enhances vulnerability reporting for NuGet packages by excluding runtime-specific dependencies not related to the application

3 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Defenders below version v30.00 will disconnect from the Console after upgrading to this release
Prisma Cloud: Features Introduced in January 2024 Stable

Prisma Compute v32.01 adds Azure agentless scanning for hub accounts, OpenShift 4.14, Debian Bullseye/Bookworm CVEs, and IBM Java detection.

  • Adds Agentless Scanning support for encrypted volumes in Azure using hub account mode
  • Adds Agentless Scanning hub account mode support for Azure
  • Adds Vulnerability Management support for Debian Bullseye and Bookworm Security fixes
  • Adds Operating System Support for OpenShift 4.14
  • Adds Vulnerability Management detection for IBM Java version 1.8 and earlier based on the jdk/release file

5 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The AccountID and Cluster macros in Runtime Security Alerts (Webhook, AWS SQS, Prisma Cortex Alert, Splunk) are deprecated; their corresponding fields are removed from alert payloads.
Was this useful?

Aviatrix

Aviatrix CoPilot — 4.6.0 Release Notes 2 releases · 2024-01-10 → 2024-01-26 Stable

Aviatrix CoPilot 4.6.0 introduces Gateway Group Upgrade and fixes CSV export bugs

  • Adds the Gateway Group Upgrade feature at CoPilot > Administration > Upgrade to group gateways (by region, cloud, or type) and configure priority-based upgrade sequences.

1 detail in Everything

1 more release in this issue · 2024-01-10 → 2024-01-26
Aviatrix VPN Client — Aviatrix VPN Client 2.17.7 Stable

Aviatrix VPNVPNA virtual private network, an encrypted tunnel between devices or networks. It carries traffic across another network as though the endpoints had a private connection. Client 2.17.7 adds Ubuntu 20/22 support and includes updated Windows TAP driver.

  • Adds native support for Ubuntu 20.04 and 22.04 operating systems
  • Bundles Windows TAP driver v9.24.7 with the client installer

2 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Support for Ubuntu 18.04 has been deprecated and is no longer available in this release
Was this useful?

Sophos Central Firewall

2023.52Released on January 16, 2024

New features in Sophos Central Firewall 2023.52 include ATP-to-X-Ops feed rename, alert severity/frequency configurator, and wildcard remote gateway for route-based VPNsVPNsA virtual private network, an encrypted tunnel between devices or networks. It carries traffic across another network as though the endpoints had a private connection..

└──▷ HOW TO FIND IT
Create a site-to-site VPNVPNA virtual private network, an encrypted tunnel between devices or networks. It carries traffic across another network as though the endpoints had a private connection. to a dynamic IP provider by using the wildcard for the remote gateway.
📍In Sophos Central, create a new site-to-site connection and enter '*' in the Remote Gateway field.
Reduce alert noise by configuring the frequency and severity thresholds for firewall alerts.
📍Navigate to Alerts Configurator in Sophos Central and adjust the frequency/severity settings for a specific time period.
  • Adds '*' wildcard support to the remote gateway field when creating a route-based VPN tunnel
  • Adds Alerts Configurator to set frequency of firewall alerts for a specific time period and configure their severity rating
  • Renames Advanced Threat Protection to Sophos X-Ops Threat Feeds, which now comprises MDRMDRManaged detection and response, an outsourced service that monitors security signals, investigates threats and helps respond to incidents. It combines specialist analysts with detection tools. Threat Feeds and Sophos X-Ops Threat Feeds

3 details in Everything

Was this useful?

Sophos Switch

Sophos Switch 01.4.1466MR4Released on January 24, 2024

Adds TACACS+ authentication for local users and 802.1X, STPSTPSpanning Tree Protocol, an IEEE standard (802.1D) that prevents Layer 2 network loops by electing a root bridge and blocking redundant switch paths, keeping Ethernet networks stable under failure conditions. Root/BDU guards, and per-port realtime meters.

  • Configures a TACACS+ server for authentication via the TACACS+ server setting
  • Enables TACACS+ authentication for 802.1X using the 802.1x configuration
  • Applies Root and BDU guards within STP configuration
  • Views per-port statistics using the new realtime meters UI

4 details in Everything

Was this useful?
◆  Network Analysis & Monitoring

sniffglue

v0.16.0

sniffglue v0.16.0 adds LoongArch64 support and improves TCPTCPA network protocol that delivers a reliable, ordered stream of bytes between two endpoints. It detects lost data and retransmits it. RST packet handling

└──▷ GET THIS VERSION
$ git clone --branch v0.16.0 https://github.com/kpcyrd/sniffglue.git
# already have the repo? check out this version:
$ git checkout v0.16.0
  • Add support for LoongArch64 architecture

1 detail in Everything

Was this useful?

Cilium hubble

v0.13.0

hubble v0.13.0 adds cluster, pod, service, HTTP header/URL, and timeout filters to observe

└──▷ GET THIS VERSION
$ git clone --branch v0.13.0 https://github.com/cilium/hubble.git
# already have the repo? check out this version:
$ git checkout v0.13.0
└──▷ USE IT
Filter hubble observe output to show only HTTP traffic matching a specific URL path and header combination.
shell
hubble observe --http-url '/api/v1/users' --http-headers 'Authorization: Bearer <token>'
Limit the duration of a single hubble request to prevent hanging in slow network conditions.
shell
hubble observe --request-timeout 5s
Narrow down flow observation to a specific Kubernetes cluster within a multi-cluster deployment.
shell
hubble observe --cluster prod-eu-west-1
  • Adds --cluster flag to filter flows by cluster name
  • Adds flags to filter by pods and services in any namespace via --namespace and --pod
  • Adds --http-headers filter to hubble observe for matching HTTP request headers
  • Adds --http-url filter to hubble observe for matching HTTP URLs
  • Adds --request-timeout flag to configure timeout for unary RPCs
+1 more show less
  • Displays server-provided flow rates in the output

6 details in Everything

Was this useful?

Security Onion

2.4.40-20240116

Security Onion 2.4.40 adds threat intelligence analyzers, eml observable type, certificate fingerprints and grid UI enhancements

└──▷ GET THIS VERSION
$ git clone --branch 2.4.40-20240116 https://github.com/Security-Onion-Solutions/securityonion.git
# already have the repo? check out this version:
$ git checkout 2.4.40-20240116
  • Adds support for nested keys in observable data structures
  • Adds certificate fingerprinting capabilities for endpoint/identity correlation
  • Adds new integrations with ThreatFox, MalwareBazaar, Echotrail, and Elasticsearch as analyzer sources
  • Adds grid page enhancements to display last highstate date/time on grid metrics screen and expose max upload metrics

4 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Removal of Curator configuration and associated logic, which may affect manual index management scripts if they relied on previous Curator state.
Was this useful?

Zeek

v6.0.3

Zeek v6.0.3 adds MIME::max_depth config to limit parser depth and fixes Ed25519Ed25519A fast elliptic-curve signature scheme with small keys, the default for new SSH keys and common in code signing. It is not quantum-safe./Ed448 DNS support

└──▷ GET THIS VERSION
$ git clone --branch v6.0.3 https://github.com/zeek/zeek.git
# already have the repo? check out this version:
$ git checkout v6.0.3
  • Adds MIME::max_depth configuration option to limit nested MIME entity parsing depth, generating an exceeded_mime_max_depth weird event when the limit is reached.
  • Updates DNS analyzer to understand Ed25519 and Ed448 signature algorithms for record validation.

2 details in Everything

Was this useful?

above

v2.3

Above v2.3 adds protocol support for SSDP, VRRPVRRPA network protocol (RFC 5798) that lets multiple routers share a virtual IP address, electing one as active so hosts keep a working gateway if the primary fails. v2/v3, LLDP, MNDP, and DTP plus mitigation display.

└──▷ GET THIS VERSION
$ git clone --branch v2.3 https://github.com/caster0x00/Above.git
# already have the repo? check out this version:
$ git checkout v2.3
Was this useful?
◆  OT / ICS Security

cisagov Malcolm

v24.01.0

Malcolm v24.01.0 adds a new landing page, password-protected file-carve downloads, and fully customizable OpenSearchOpenSearchAn open-source search and analytics engine, forked from Elasticsearch by AWS in 2021, that lets cyber tools store, query, and visualize large volumes of log or event data without licensing restrictions. index patterns via new env vars.

└──▷ GET THIS VERSION
$ git clone --branch v24.01.0 https://github.com/cisagov/Malcolm.git
# already have the repo? check out this version:
$ git checkout v24.01.0
└──▷ USE IT
Enable password-protected zip downloads of Zeek-carved files so analysts can safely retrieve potentially malicious files over HTTP.
ini
EXTRACTED_FILE_HTTP_SERVER_ZIP=true
EXTRACTED_FILE_HTTP_SERVER_KEY=infected
Partition network traffic logs into monthly OpenSearch indexes instead of the default daily suffix, and keep other logs (nginx, beats) on a daily schedule.
ini
MALCOLM_NETWORK_INDEX_PATTERN=arkime_sessions3-*
MALCOLM_NETWORK_INDEX_TIME_FIELD=firstPacket
MALCOLM_NETWORK_INDEX_SUFFIX=%{%y%m}
MALCOLM_OTHER_INDEX_PATTERN=malcolm_beats_*
MALCOLM_OTHER_INDEX_TIME_FIELD=@timestamp
MALCOLM_OTHER_INDEX_SUFFIX=%{%y%m%d}
ARKIME_NETWORK_INDEX_PATTERN=arkime_sessions3-*
ARKIME_NETWORK_INDEX_TIME_FIELD=firstPacket
Set Arkime to rotate its session index weekly rather than daily to reduce index overhead on lower-volume sensors.
ini
ARKIME_ROTATE_INDEX=weekly
  • Adds ARKIME_ROTATE_INDEX to arkime.env (default daily) to control Arkime index rotation frequency.
  • Adds MALCOLM_NETWORK_INDEX_PATTERN, MALCOLM_NETWORK_INDEX_TIME_FIELD, MALCOLM_NETWORK_INDEX_SUFFIX, MALCOLM_OTHER_INDEX_PATTERN, MALCOLM_OTHER_INDEX_TIME_FIELD, MALCOLM_OTHER_INDEX_SUFFIX, ARKIME_NETWORK_INDEX_PATTERN, and ARKIME_NETWORK_INDEX_TIME_FIELD to opensearch.env for full control over how network and other log indexes are named and time-stamped in OpenSearch/Elasticsearch.
  • Adds EXTRACTED_FILE_HTTP_SERVER_ZIP to zeek.env (default false) to enable downloading carved files as a password-protected .zip archive.
  • Changes the default value of EXTRACTED_FILE_HTTP_SERVER_KEY in zeek-secret.env to infected, setting the default password for carved-file zip downloads.
  • Adds a new Malcolm instance landing page.
+2 more show less
  • Adds an 'all files except common plain text files' option for Malcolm's file carving to match Hedgehog Linux capability.
  • Improves NetBoxNetBoxAn open-source network infrastructure management platform maintained by the NetBox Labs community, used to model IP addresses, devices, and topology so cyber tools can query a live source of truth about the environment. device type library import by using the official import script.

7 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The default value of EXTRACTED_FILE_HTTP_SERVER_KEY in zeek-secret.env is changed to infected; any automation or documentation relying on the previous default password for carved-file downloads will need to be updated.
Was this useful?
◆  Email Security

Rspamd

3.8.0

Rspamd 3.8.0 adds JSON logging, per-RBLRBLA DNS-based blocklist of IP addresses known to send spam or host malicious traffic, maintained by various operators, used by cyber tools to reject or flag connections from listed sources at lookup speed. url_whitelist control, and DMARC suppression for specific recipients

└──▷ GET THIS VERSION
$ git clone --branch 3.8.0 https://github.com/rspamd/rspamd.git
# already have the repo? check out this version:
$ git checkout 3.8.0
  • Support JSON logging via json module
  • Support the ping command in fuzzy storage protocol
  • Support suppressing DMARC reporting for particular recipients
  • Add per-RBL configuration to disable or replace url_whitelist

4 details in Everything

Was this useful?

Abnormal AI

Filter for QR Code Attacks in Threat Log

New QR code attack filtering in Threat Log and enhanced detection for emails with malicious QR images.

└──▷ HOW TO FIND IT
View all attacks remediated by the new QR code detector in the Threat Log interface.
📍In the console, go to Threat Log and apply the filter for QR code detector remediation events.
  • Adds the ability to filter Threat Log to view all attacks remediated by the new QR code detector

1 detail in Everything

Was this useful?
◆  IDS / IPS

CrowdSec

v1.6.0

CrowdSec v1.6.0 adds AppSecAppSecApplication security: the practice of finding and fixing vulnerabilities in software during design, development, and testing. Cyber tools build on AppSec workflows to shift vulnerability detection earlier in the development lifecycle. engine support, Loki integration, and a new cpu-profile flag

└──▷ GET THIS VERSION
$ git clone --branch v1.6.0 https://github.com/crowdsecurity/crowdsec.git
# already have the repo? check out this version:
$ git checkout v1.6.0
└──▷ USE IT
Profile CPUCPUThe main general-purpose processor in a computer. It runs application instructions and coordinates work with memory and other hardware. usage while CrowdSec is running to identify bottlenecks.
shell
crowdsec --cpu-profile profile.cpuprof
Enable console management features in the CrowdSec service.
shell
export CS_CONSOLE_MANAGEMENT=true
  • Adds support for the Application Security Engine to detect web application attacks.
  • Adds Loki integration for log forwarding.
  • Adds --cpu-profile flag to crowdsec CLI commands for profiling.
  • Enables console management via the CS_CONSOLE_MANAGEMENT environment variable.

4 details in Everything

Was this useful?
Cloud & Container Security
◆  Container & Image Security

Inspektor Gadget

v0.24.0

Inspektor Gadget v0.24.0 adds ig image remove, trace_mount, and trace_signal gadgets plus fentry/fexit/raw_tracepoint support in run

└──▷ GET THIS VERSION
$ git clone --branch v0.24.0 https://github.com/inspektor-gadget/inspektor-gadget.git
# already have the repo? check out this version:
$ git checkout v0.24.0
└──▷ TRY IT
Clean up unused gadget images to free disk space
$ ig image remove <image-name>
Monitor all mount operations across the cluster for policy enforcement or auditing
$ ig trace_mount
Capture signal delivery events to debug process behavior or security policies
$ ig trace_signal
  • ig image remove command added to delete local gadget images
  • New trace_mount gadget for monitoring mount syscalls
  • New trace_signal gadget for tracing signal handling events
  • run gadget now supports fentry, fexit, and raw_tracepoint eBPFeBPFA Linux technology for running verified programs inside the kernel without changing its source. Tools use it to observe processes, enforce rules and process network traffic. program types

4 details in Everything

Was this useful?

slimtoolkit

1.40.9 2 releases · 2024-01-07 → 2024-01-15 Stable

slimtoolkit 1.40.9 adds command parameter info to mondel process events

└──▷ GET THIS VERSION
$ git clone --branch 1.40.9 https://github.com/slimtoolkit/slim.git
# already have the repo? check out this version:
$ git checkout 1.40.9
1 more release in this issue · 2024-01-07 → 2024-01-15
1.40.8 Stable

Slim 1.40.8 adds new vulnerability, registry and images commands with EPSSEPSSExploit Prediction Scoring System, an estimate of the probability that a published vulnerability will be exploited in the next 30 days. It helps prioritize investigation and patching. lookup support

└──▷ GET THIS VERSION
$ git clone --branch 1.40.8 https://github.com/slimtoolkit/slim.git
# already have the repo? check out this version:
$ git checkout 1.40.8
  • Adds the vulnerability command for vulnerability analysis
  • Adds the epss subcommand to lookup EPSS scores for vulnerabilities
  • Adds the registry server command to host a local OCIOCIOpen Container Initiative standard, maintained by the Linux Foundation, defining the image format and runtime spec that container tools share so images built once run anywhere OCI-compliant. registry
  • Adds the registry push command to push local images to a registry
  • Adds the images command to list container images

5 details in Everything

Was this useful?

cilium-cli

v0.15.21 2 releases · 2024-01-10 → 2024-01-31 Stable

cilium-cli v0.15.21 adds bgp routes CLI command to retrieve BGPBGPA routing protocol that lets autonomous systems on the internet exchange reachability information, determining how traffic flows between networks. Cyber tools use it to monitor route hijacks or inject sinkholes. routes from the cluster

└──▷ GET THIS VERSION
$ git clone --branch v0.15.21 https://github.com/cilium/cilium-cli.git
# already have the repo? check out this version:
$ git checkout v0.15.21
└──▷ TRY IT
Retrieve the current BGP routing table from the cluster to verify peer connectivity and route advertisement.
$ cilium bgp routes
  • Adds bgp routes subcommand for retrieving Border Gateway Protocol (BGP) routes

1 detail in Everything

1 more release in this issue · 2024-01-10 → 2024-01-31
v0.15.20 Stable

cilium-cli v0.15.20 adds clustermesh status support for external kvstores and enables connectivity tests without a Cilium node.

└──▷ GET THIS VERSION
$ git clone --branch v0.15.20 https://github.com/cilium/cilium-cli.git
# already have the repo? check out this version:
$ git checkout v0.15.20
  • cilium clustermesh status now works correctly with external key-value stores (e.g., etcd) instead of only Kubernetes configmaps
  • Connectivity tests can now run on nodes that do not have Cilium installed, enabling mixed-cluster or partial-deployment testing scenarios

2 details in Everything

Was this useful?

Docker Compose

v2.24.4 2 releases · 2024-01-11 → 2024-01-29 Stable

Docker Compose v2.24.4 adds storage_opt support for volume driver options.

└──▷ GET THIS VERSION
$ git clone --branch v2.24.4 https://github.com/docker/compose.git
# already have the repo? check out this version:
$ git checkout v2.24.4
1 more release in this issue · 2024-01-11 → 2024-01-29
v2.24.0 Stable

Docker Compose v2.24.0 adds attach, logs --index, stats command and --with-dependencies build flag

└──▷ GET THIS VERSION
$ git clone --branch v2.24.0 https://github.com/docker/compose.git
# already have the repo? check out this version:
$ git checkout v2.24.0
└──▷ TRY IT
View resource consumption (CPUCPUThe main general-purpose processor in a computer. It runs application instructions and coordinates work with memory and other hardware./Memory) for all services in the current project
$ docker compose stats
Filter ps output to show only containers created by the current compose run that are not defined in the configuration (orphans)
$ docker compose ps --orphans
Build a service and all of its transitive dependencies automatically
$ docker compose build --with-dependencies my_service
  • Introduces the new docker compose attach subcommand to attach to running services
  • Adds ps --orphans flag to include or exclude orphaned containers in project listings
  • Adds logs --index flag to select specific replica containers from logs output
  • Adds --with-dependencies flag to docker compose build for transitive dependency building
  • Introduces the new docker compose stats command to view resource usage of compose services

5 details in Everything

└──▷ BREAKING ON UPGRADE
  • !service hash computation logic has been updated to fully ignore replicas/scale. Due to this change, after upgrade all services will be recreated.
Was this useful?
◆  Cloud Security Posture

Turbot Steampipe

GCP plugin 0.48.0 3 releases · 2024-01-05 → 2024-01-22 Stable

Steampipe GCP plugin v0.48.0 adds gcp_cloud_asset table and fixes columns in gcp_kubernetes_cluster

└──▷ USE IT
Query GCP Cloud Asset Inventory using the new table
shell
steampipe query "select * from gcp_cloud_asset;"
  • Adds the gcp_cloud_asset table to query Google Cloud Asset Inventory data

1 detail in Everything

2 more releases in this issue · 2024-01-05 → 2024-01-22
Azure plugin 0.53.0 Stable

Steampipe Azure plugin v0.53.0 adds audit_policy column and fixes camelCase key vault retrieval

  • Adds audit_policy column to azure_sql_database and azure_sql_server tables to expose SQL auditing configuration directly in queries.

1 detail in Everything

v0.21.3 Stable

Adds STEAMPIPE_FDW_PPROF environment variable to enable pprof profiling for the Postgres FDW

└──▷ GET THIS VERSION
$ git clone --branch v0.21.3 https://github.com/turbot/steampipe.git
# already have the repo? check out this version:
$ git checkout v0.21.3
  • Allow using pprof on FDW when STEAMPIPE_FDW_PPROF environment variable is set

1 detail in Everything

Was this useful?

Prowler

3.12.0

Prowler 3.12.0 adds custom check metadata overrides, AWS role session names, and Amazon Cognito service coverage

└──▷ GET THIS VERSION
$ git clone --branch 3.12.0 https://github.com/toniblyx/prowler.git
# already have the repo? check out this version:
$ git checkout 3.12.0
└──▷ TRY IT
Override severity for specific checks using an external metadata file instead of modifying source code.
$ prowler aws --custom-checks-metadata-file custom_checks_metadata.yaml
Set a descriptive name for the assumed IAMIAMIdentity and Access Management — a framework of policies and services for controlling who can authenticate to systems and what resources they are authorized to use, letting cyber tools enforce least-privilege and audit access. role to aid in CloudTrailCloudTrailAWS service that records API calls and account activity across an AWS environment, giving cyber tools an audit log to detect anomalous or malicious actions. auditing and logging.
$ prowler aws --role-session-name my-audit-session
  • Adds --custom-checks-metadata-file CLI flag to override check severity via an external YAML file
  • Adds --role-session-name <role_session_name> CLI argument to customize the AWS Role Session name during assumption
  • Adds Amazon Cognito service coverage with new checks for Cognito resources
  • Improves AWS scanning performance by only targeting regions explicitly enabled in the AWS account

4 details in Everything

Was this useful?

Rhino Security Labs Pacu

v1.5.1

Pacu v1.5.1 adds an akid module and decoder for extracting keys from access identifiers.

└──▷ GET THIS VERSION
$ git clone --branch v1.5.1 https://github.com/RhinoSecurityLabs/pacu.git
# already have the repo? check out this version:
$ git checkout v1.5.1
└──▷ USE IT
Extract Access Key IDs from input text using the new akid module command.
shell
run akid -i "AKIA…"
Was this useful?

Cloud Custodian

0.9.34.0

Cloud Custodian 0.9.34.0 adds aws.org-account, aws.org-policy, and aws.s3-directory resources; new filters and actions for cost optimization and tagging.

└──▷ GET THIS VERSION
$ git clone --branch 0.9.34.0 https://github.com/cloud-custodian/cloud-custodian.git
# already have the repo? check out this version:
$ git checkout 0.9.34.0
└──▷ TRY IT
Query member accounts in your AWS Organization using the new org-account resource
$ c7n-org run -s output/ -c ./config.yml policy.yaml
# Inside policy.yaml for aws.org-account:
resources: aws.org-account
Apply cost optimization filters to identify underutilized EC2EC2Amazon's cloud virtual-machine service, letting tools run on-demand servers without managing physical hardware. instances or ASGs
yaml
# Inside policy.yaml for aws.ec2:
filters:
  - type: cost-optimization
    enabled: true
Use the new disassociate action to release an Elastic IP via policy
yaml
# Inside policy.yaml for aws.elastic-ip:
policy:
  resources: aws.elastic-ip
  actions:
    - disassociate
  • Adds aws.org-account resource type to query AWS Organization member accounts
  • Adds aws.org-policy resource type to query policies attached to Organizational Units or accounts
  • Adds aws.org-unit resource type to query Organizational Units within an organization
  • Adds aws.s3-directory resource type to manage S3 Express One Zone directories
  • Adds azure.synapse resource type for Azure Synapse Analytics workspaces
+8 more show less
  • Adds cost-optimization filter to aws.asg, aws.ebs, aws.ec2, aws.ecs-service, and aws.lambda resources
  • Adds json-diff filter to aws.appstream-fleet, aws.kms, aws.ssm-document, and aws.user-pool resources
  • Adds disassociate action to aws.elastic-ip resource
  • Adds detach action to aws.eni resource
  • Adds tagging actions (auto-tag-user, copy-related-tag, remove-tag, rename-tag, tag) and marked-for-op filter to aws.batch-compute, aws.batch-definition, and aws.batch-queue resources
  • Adds update action to aws.batch-queue resource
  • Adds in operator support to the network-location filter for VPCVPCA logically isolated virtual network inside a public cloud provider's infrastructure, letting tools deploy resources with private addressing, controlled routing, and firewall rules without managing physical hardware. resources
  • Adds python3.12 runtime support for lambda policies, defaulting to python3.11

13 details in Everything

Was this useful?

Weaveworks eksctl

v0.169.0 2 releases · 2024-01-19 → 2024-01-24 Stable

eksctl v0.169.0 adds support for creating Amazon EKS 1.29 clusters

└──▷ GET THIS VERSION
$ git clone --branch v0.169.0 https://github.com/weaveworks/eksctl.git
# already have the repo? check out this version:
$ git checkout v0.169.0
└──▷ USE IT
Provision a new Kubernetes 1.29 cluster in your default region
shell
eksctl create cluster --version 1.29
  • --version 1.29 is now supported to provision new Amazon EKS 1.29 clusters

1 detail in Everything

1 more release in this issue · 2024-01-19 → 2024-01-24
0.168.0 Stable

eksctl 0.168.0 adds safe access to Fargate CoreDNS pod annotations.

└──▷ GET THIS VERSION
$ git clone --branch 0.168.0 https://github.com/eksctl-io/eksctl.git
# already have the repo? check out this version:
$ git checkout 0.168.0
Was this useful?

Bishop Fox CloudFox

v1.13.1

CloudFox v1.13.1 adds api-gw command for enumerating API Gateways and updates role-trust data

└──▷ GET THIS VERSION
$ git clone --branch v1.13.1 https://github.com/BishopFox/cloudfox.git
# already have the repo? check out this version:
$ git checkout v1.13.1
  • Adds the api-gw subcommand to enumerate AWS API Gateway resources
  • Enriches the role-trust module with data from fwd:cloudsec's known_aws_accounts repo

2 details in Everything

Was this useful?
◆  Cloud Runtime Security

Falco

0.37.0

Falco 0.37.0 adds rule engine overrides, HTTP output compression/keep-alive, env var expansion, and removes the --userspace flag

└──▷ GET THIS VERSION
$ git clone --branch 0.37.0 https://github.com/falcosecurity/falco.git
# already have the repo? check out this version:
$ git checkout 0.37.0
  • Adds compress_uploads and keep_alive fields to the http_output block in falco.yaml to control HTTP output behavior
  • Enables environment variable expansion inside YAML strings across all configuration files via FALCO_CONF or standard parser support
  • Adds a new engine-level mechanism for selective overrides of Falco rules
  • Prints system information on startup for easier diagnosis
  • Adds driver selection configuration in falco.yaml to choose the kernel module or no-driver mode
+3 more show less
  • Adds listen_address field to the webserver block in falco.yaml to configure the HTTP API binding address
  • Adds engine_version_semver key to the /versions endpoint for version checking
  • Enables watch_config_files to monitor configuration file moves and deletions

8 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The --userspace CLI flag is removed; users must use the eBPFeBPFA Linux technology for running verified programs inside the kernel without changing its source. Tools use it to observe processes, enforce rules and process network traffic. driver or kernel module.
  • !The outputs.rate and outputs.max_burst configuration keys are removed from falco.yaml; output limiting is now handled differently.
  • !The none value for the driver config key is renamed to nodriver in falco.yaml.
Was this useful?
Detection & Response
◆  Endpoint Security (EDR/XDR)

Huntress

MDR for Microsoft 365 Progress Report #2

Huntress MDRMDRManaged detection and response, an outsourced service that monitors security signals, investigates threats and helps respond to incidents. It combines specialist analysts with detection tools. improves account takeover detection via VPNVPNA virtual private network, an encrypted tunnel between devices or networks. It carries traffic across another network as though the endpoints had a private connection. enrichment and user identity resolution

  • Incorporates Spur.us VPN data into Microsoft 365 event analysis to enhance anomalous login and account takeover detection.
  • Adds event processing enrichment that resolves user identities using GUID lookups when UPN fields are unavailable, ensuring accurate user association.

2 details in Everything

Was this useful?

Sophos Central

January 22, 2024 2 releases · 2024-01-08 → 2024-01-22 Stable

Sophos Central introduces new navigation and a notifications center in January 22, 2024 update.

└──▷ HOW TO FIND IT
Use the new interface to quickly navigate and check alerts.
📍Log in to Sophos Central and look for the updated navigation bar and notifications bell icon.
  • New navigation menus and shortcuts with easier access
  • New notifications center added to the interface

2 details in Everything

1 more release in this issue · 2024-01-08 → 2024-01-22
January 8, 2024 Stable

Sophos Central adds AP6 mesh support, SNMPSNMPA UDP-based protocol for querying and managing network devices, standardized by the IETF. Cyber tools use it to pull interface stats, topology data, and device state from routers, switches, and servers at scale./LLDP management, and Autotask product mapping in Jan 8 release.

  • Extends change conflict detection to network ports
  • Enables AP6 Series access points to be configured as a wireless mesh network
  • Adds Product Mapping in Central Partner to sync usage with Autotask

3 details in Everything

Was this useful?

Trend Vision One

Support to exclude specified endpoints from response actions 20 releases · 2024-01-08 → 2024-01-31 Stable

Trend Vision One adds support to exclude up to six endpoints from automated response actions.

19 more releases in this issue · 2024-01-08 → 2024-01-31
Forensics workspace enhancements Stable

Trend Vision One Forensics workspace now shows endpoint risk score, connection status, and management status in the Workspace view.

  • Displays the latest risk score for endpoints in the Forensics Workspace view
  • Shows whether each endpoint is currently connected or not in the Forensics Workspace view
  • Indicates whether each endpoint is managed or not in the Forensics Workspace view

3 details in Everything

Zero Trust Secure Access now supports local user groups Stable

Trend Vision One Zero Trust Secure Access adds local user group management for access rules

Forensics highlights now available Stable

Trend Vision One Forensics adds a Highlights section to evidence reports for high-risk items

Zero Trust Secure Access Private Access and Internet Access now supports custom service status on individual endpoints Stable

Trend Vision One Zero Trust Secure Access adds per-endpoint status override for Internet and Private Access

  • Adds the ability to set custom service status on individual endpoints for Private Access and Internet Access, allowing an endpoint's status to differ from the global configuration or be permanently disabled.

1 detail in Everything

Zero Trust Secure Access now supports devices managed by custom MDM solutions or no MDM solution Stable

Zero Trust Secure Access mobile module now supports custom MDMMDMMobile device management, centrally configuring and managing enrolled devices. Administrators use it to apply settings, distribute applications and enforce device security policies. or no MDM via Mobile Device Director.

  • Extends Zero Trust Secure Access mobile module deployment to devices managed by custom MDM solutions in addition to Microsoft Intune
  • Adds deployment capability for devices with no MDM solution through Mobile Device Director

2 details in Everything

Security Playbooks feature enhancements and user experience improvement Stable

Endpoint Response and Incident Response Evidence Collection playbooks now support CIDRCIDRA notation for a block of IP addresses, such as 10.0.0.0/24. The number after the slash says how many leading address bits identify the network. and IP ranges.

New Scan for Malware endpoint response action available Stable

New on-demand Scan for Malware endpoint response action available via context menus

Security Configuration supports network security Stable

Cyber Risk Overview adds Network Security section showing Deep Discovery Inspector deployment status and configuration reporting.

Security Dashboard adds five container-related widgets Stable

Security Dashboard adds five new container widgets for runtime vulnerabilities and CVEs.

  • Adds Top Clusters with Runtime Vulnerabilities/Events widget
  • Adds Top Namespaces with Runtime Rule Violations widget
  • Adds Top Runtime Policy Violations by Action widget
  • Adds Top Trigger Runtime Rules by Violations widget
  • Adds Top Unique CVEs by CVSS Rating widget

5 details in Everything

TrendAI Vision One Email and Collaboration Security official launch Stable

Official launch of TrendAI Vision One Email and Collaboration Security with centralized inventory and protection modules.

  • Adds Email Asset Inventory providing centralized visibility combining protection managers with dedicated inventory views for accounts, domains, and servers.
  • Adds Email Sensor module enabling centralized management to enable or disable XDRXDRExtended detection and response, combining signals and investigation across endpoints, networks, identities or cloud services. It helps analysts connect activity that separate tools might miss. detection and response for email accounts.
  • Adds Cloud Email and Collaboration Protection offering real-time threat and data protection for Office 365, Google Workspace, Box, and Dropbox via inline and API integration.
  • Adds Cloud Email Gateway Protection supporting MX record rerouting, SPFSPFAn email authentication standard that lets a domain owner publish, via DNS, which mail servers are authorized to send on its behalf, so receiving servers can reject spoofed senders./DKIMDKIMAn email authentication standard that lets a sending mail server cryptographically sign outgoing messages so receiving servers can verify the signature was not forged or tampered with in transit./DMARC authentication, and outbound DLPDLPData Loss Prevention: a category of controls that inspect and block sensitive data from leaving an organisation via email, web, or removable media, giving cyber tools a policy enforcement layer over data in motion and at rest. configurables.

4 details in Everything

Zero Trust Secure Access Supports Mobile Agent Deployment on Devices With Custom MDM Stable

Zero Trust Secure Access adds support for mobile agent deployment on devices with custom MDMMDMMobile device management, centrally configuring and managing enrolled devices. Administrators use it to apply settings, distribute applications and enforce device security policies.

  • Adds the ability to deploy the Zero Trust Secure Access Secure Access Module to mobile devices that are unmanaged or managed by an MDM solution using managed configuration.

1 detail in Everything

Create Security Awareness Training training campaigns targeting at-risk users Stable

Initiate Security Awareness Training campaigns directly from Attack Surface Discovery, Threat and Exposure Management, and Identity Posture apps.

  • Adds Create Training Campaign option to the context menu for domain accounts in Attack Surface Discovery
  • Adds links to create Security Awareness Training training in remediation steps for risk events like phishing simulations in Threat and Exposure Management
  • Adds a Create Security Awareness Training Training Campaign button on the Identity Summary screen and Exposure tab in Identity Posture

3 details in Everything

Security Configuration features enhanced email security Stable

Security Configuration tab gains Email Security section with protection status and feature adoption rates.

  • Adds the Email Security section to the Security Configuration tab of Cyber Risk Overview to show protection status for connected email security products
  • Adds support for displaying key feature adoption rates across email domains in the Email Security view
  • Links the count of incorrectly configured domains directly to the Email Asset Inventory for deeper investigation

3 details in Everything

Filter query results of YARA and osquery tasks by status Stable

Adds filtering YARA and osquery query results by status in Agentic SIEMSIEMSecurity information and event management, collecting logs from many systems and correlating events to find suspicious activity. Analysts use it to investigate alerts and incidents. & XDRXDRExtended detection and response, combining signals and investigation across endpoints, networks, identities or cloud services. It helps analysts connect activity that separate tools might miss.

  • Filter query results of YARA and osquery tasks by status in the Forensics section.

1 detail in Everything

Master Administrators can opt in to all pre-release apps/services Stable

Master Administrators can now manually opt in or out of TrendAI Vision One pre-release apps and services.

Virtual Network Sensor version 1.0.1225 Stable

Virtual Network Sensor 1.0.1225 adds AWS deployment support and network-traffic CLI command.

  • Adds network-traffic CLI command to capture and collect network traffic for investigation
  • Adds support for deploying on the AWS platform

2 details in Everything

Virtual Network Sensor supports new deployment features Stable

Virtual Network Sensor adds AWS cloud deployment support and default KVMKVMA Linux kernel module that turns the kernel into a hypervisor, letting a process run fully isolated virtual machines using hardware virtualisation extensions. Cyber tools use it to sandbox execution environments at near-native speed. password configuration.

  • Adds Virtual Network Sensor support for deploying to AWS cloud environments
  • Adds the ability to specify a default password for KVM deployments within Network Inventory

2 details in Everything

Region deployment selection available for Cloud Accounts Stable

Allows selecting specific AWS regions for Agentless Vulnerability, Threat Detection, and Container Protection deployments in Cloud Accounts.

Support for terminating Amazon ECS containers Stable

New capability to terminate Amazon ECSECSElastic Common Schema, an open specification maintained by Elastic that defines a standard field naming convention for log and event data, letting cyber tools share and correlate records without per-source field mapping. containers from Workbench, Observed Attack Techniques, or XDRXDRExtended detection and response, combining signals and investigation across endpoints, networks, identities or cloud services. It helps analysts connect activity that separate tools might miss. Data Explorer.

Was this useful?

Sophos Protection for Linux

Version 2023.3

Sophos Protection for Linux 2023.3 adds Enterprise Software Management, configurable Message Relay/Update Cache at install, and on-read/on-write scan modes.

  • Supports configuring a Message Relay and Update Cache during installation.
  • Adds on-read or on-write scanning modes to the on-access file scanner.
  • Introduces Enterprise Software Management support, replacing Controlled Updates, giving customers staged rollout control across their estate.

3 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Controlled Updates for Linux servers will be turned off on January 31st, 2024; customers must migrate to Enterprise Software Management before that date.
Was this useful?
◆  SIEM

Google SecOps

January 24, 2024 4 releases · 2024-01-03 → 2024-01-24 Stable

Chronicle passes through GCP Security Command Center threat detections to alert on VM, Container, and Event findings.

  • Adds passthrough detections for GCP Security Command Center Event Threat Detections, Virtual Machine Threat Detections, and Container Threat Detections
  • Exposes new detection packs (e.g., CDIR SCC Enhanced Exfiltration, CDIR SCC Enhanced Malware) to ingest the above findings

2 details in Everything

3 more releases in this issue · 2024-01-03 → 2024-01-24
January 19, 2024 Stable

Adds eight log types without default parsers and updates existing default parsers.

  • Adds support for ALICLOUD_ANTI_DDOS log type; no default parser is included.
  • Adds support for ALICLOUD_WAF log type; no default parser is included.
  • Adds support for ARISTA_CVP log type; no default parser is included.
  • Adds support for CIPHERTRUST_MANAGER log type; no default parser is included.
  • Adds support for CYBERGATEKEEPER_NAC log type; no default parser is included.
+47 more show less
  • Adds support for MICROSOFT_GRAPH_ACTIVITY_LOGS log type; no default parser is included.
  • Adds support for TRENDMICRO_EDGEIPS log type; no default parser is included.
  • Adds support for VANGUARD log type; no default parser is included.
  • Updates default parser for AWS_AURORA
  • Updates default parser for AZURE_AD
  • Updates default parser for AZURE_AD_AUDIT
  • Updates default parser for AZURE_AD_CONTEXT
  • Updates default parser for AZURE_DEVOPS
  • Updates default parser for BARRACUDA_EMAIL
  • Updates default parser for BOMGAR
  • Updates default parser for BOX
  • Updates default parser for CISCO_FIREPOWER_FIREWALL
  • Updates default parser for CISCO_UMBRELLA_AUDIT
  • Updates default parser for CISCO_VPN
  • Updates default parser for CISCO_WIRELESS
  • Updates default parser for CLOUDFLARE
  • Updates default parser for DELL_SWITCH
  • Updates default parser for F5_ASM
  • Updates default parser for FIREEYE_ALERT
  • Updates default parser for FIREEYE_HX
  • Updates default parser for FIREEYE_PX
  • Updates default parser for FORTINET_FORTIWEB
  • Updates default parser for CLEARPASS
  • Updates default parser for INFOBLOX_DHCP
  • Updates default parser for JUMPCLOUD_DIRECTORY_INSIGHTS
  • Updates default parser for KUBERNETES_AUDIT_AZURE
  • Updates default parser for AZURE_ACTIVITY
  • Updates default parser for MICROSOFT_GRAPH_ALERT
  • Updates default parser for IIS
  • Updates default parser for NUTANIX_PRISM
  • Updates default parser for OFFICE_365
  • Updates default parser for PAN_FIREWALL
  • Updates default parser for QUEST_CHANGE_AUDITOR_EMC
  • Updates default parser for QUEST_FILE_AUDIT
  • Updates default parser for RH_ISAC_IOC
  • Updates default parser for STEELHEAD
  • Updates default parser for SENTINELONE_CF
  • Updates default parser for SYMANTEC_DLP
  • Updates default parser for SYNOLOGY
  • Updates default parser for SYSDIG
  • Updates default parser for NIX_SYSTEM
  • Updates default parser for VECTRA_DETECT
  • Updates default parser for VECTRA_STREAM
  • Updates default parser for WINDOWS_DNS
  • Updates default parser for WINEVTLOG
  • Updates default parser for WINEVTLOG_XML
  • Updates default parser for ZSCALER_WEBPROXY

52 details in Everything

January 17, 2024 Stable

Google SecOps Jan 17 2024: New UDM objects and fields expand entity analysis surface

  • Adds new Unified Data Model objects: DNSRecord, Favicon, ThreatVerdict, PopularityRank, SSLCertificate hierarchy (SSLCertificate.AuthorityKeyId, SSLCertificate.CertSignature, SSLCertificate.DSA, SSLCertificate.EC, SSLCertificate.Extension, SSLCertificate.PublicKey, SSLCertificate.RSA, SSLCertificate.Subject, SSLCertificate.Validity), Tracker, Url, and SecurityResult.AnalyticsMetadata
  • Adds new fields to existing UDM nouns: url_metadata on Noun; ruleset_category_display_name, confidence_score, analytics_metadata, threat_verdict, last_discovered_time on SecurityResult; last_dns_records, categories, favicon, jarm, last_dns_records_time, last_https_certificate, last_https_certificate_time, popularity_ranks, tags, whois_time on Domain; security_result and main_icon on File
  • Adds new fields to SecurityResult.Association: sponsor_region, targeted_regions, and tags
  • Extends File.FileType values with support for DWG, DXF, 3DS, WEBM, MKV, OneNote, OOXMLOOXMLAn ISO-standardized file format family for Office documents (Word, Excel, PowerPoint), maintained by Microsoft, that stores content as XML inside a ZIP archive, giving cyber tools a parseable, scriptable structure for document analysis., ZST, LZFSE, Python WHL/PKG, M4, Objective-C, JMOD, Makefile, INI, Clojure (CLJ), PDBPDBA debug symbol file format used by Microsoft's toolchain that maps compiled binaries back to source code, function names, and variable types, letting cyber tools resolve symbols during reverse engineering or memory analysis., SQL, Neko, WER, GoLang, SGML, JSON, CSV, SquashFS, VHD, IPSIPSAn intrusion prevention system, inspecting activity and blocking traffic or actions that match its security rules. It adds active enforcement to detection., PEM, PGP, CRT, PYC
  • Extends Metric.Dimension with PRINCIPAL_PROCESS_FILE_PATH, PRINCIPAL_PROCESS_FILE_HASH, SECURITY_RESULT_RULE_NAME and adds ALERT_EVENT_NAME_COUNT to Metric.MetricName
+1 more show less
  • Adds NONE as a valid value for SecurityResult.ProductSeverity

6 details in Everything

January 03, 2024 Stable

Google SecOps adds support for 19 new log types including Asimily, Checkpoint Gaia, Cisco Cyber Vision and more.

  • Adds ASIMILY log type for Asimily product data ingestion
  • Adds CHECKPOINT_GAIA log type for Check Point Gaia device logs
  • Adds CISCO_CYBER_VISION log type for Cisco Cyber Vision IoTIoTA collective label for internet-connected physical devices — sensors, cameras, routers, appliances — that tools target because they run embedded firmware with limited patching and broad network exposure./OT telemetry
  • Adds CISCO_IRONPORT log type for Cisco IronPort email gateway logs
  • Adds CYBER_2_IDS log type for Cyber 2.0 Intrusion Detection System alerts
+17 more show less
  • Adds CYPHERTRUST_MANAGER log type for CypherTrust Manager key management logs
  • Adds DUO_TRUST_MONITOR log type for Duo Trust Monitor authentication signals
  • Adds EXTREME_WIRELESS log type for Extreme Networks wireless controller events
  • Adds FIREEYE_PX log type for FireEye PX endpoint protection data
  • Adds HARFANGLAB_EDR log type for Harfanglab EDREDREndpoint detection and response, monitoring computers for suspicious behavior and providing investigation and response controls, such as isolating a device. telemetry
  • Adds IMAGENOW log type for ImageNow document management logs
  • Adds INFINICO_NETWYVERN log type for INFINICO NetWyvern appliance events
  • Adds QUEST_CA_AUDIT log type for Quest CA Audit Trail data
  • Adds QUEST_CHANGE_AUDITOR_EMC log type for Quest Change Auditor for EMC logs
  • Adds QUEST_FILE_AUDIT log type for Quest File Access Audit events
  • Adds RADIFLOW_IDS log type for RadiFlow IDSIDSAn intrusion detection system, monitoring traffic or host activity for suspicious behavior and producing alerts. Detection alone does not necessarily block the activity. alerting data
  • Adds SENTRIGO log type for rigo security analytics logs
  • Adds SEPPMAIL log type for SEPPmail secure email communication logs
  • Adds SPECTERX log type for SpecterX endpoint visibility data
  • Adds VIACONTROL log type for ViaControl Server Application logs
  • Adds WINDCHILL log type for PTC WindChill product lifecycle management logs
  • Adds WS_FTP log type for WS Ftp file transfer logs

22 details in Everything

Was this useful?

Databricks

Native XML file format support (Public Preview) 10 releases · 2024-01-09 → 2024-01-31 Stable

Databricks adds native XML file format support in public preview, enabling ingestion, querying, and parsing of XML data.

  • Adds from_xml SQL expression for parsing XML data
  • Enables reading and writing XML files natively without external jars
  • Supports automatic schema inference and evolution for XML sources

3 details in Everything

9 more releases in this issue · 2024-01-09 → 2024-01-31
Share AI models using Databricks Marketplace (Public Preview) Stable

New capability to share AI models registered in Unity Catalog via Databricks Marketplace (Public Preview)

  • Enables sharing of AI models registered in Unity Catalog through the Marketplace interface

1 detail in Everything

Monitor GPU model serving workloads using inference tables Stable

Adds inference tables to monitor GPUGPUA graphics processing unit, a processor that performs many calculations in parallel. AI workloads use GPUs to speed up model training and inference. model serving workloads.

Access controls lists can be enabled on upgraded workspaces Stable

Databricks enables manual activation of access control lists for upgraded Standard-to-Premium workspaces

  • Enables workspace admins to manually enable Workspace access control on upgraded Standard-to-Premium workspaces.
  • Enables workspace admins to manually enable Cluster, pool, jobs access control on upgraded Standard-to-Premium workspaces.
  • Enables workspace admins to manually enable Cluster visibility control on upgraded Standard-to-Premium workspaces.
  • Enables workspace admins to manually enable Jobs visibility control setting on upgraded Standard-to-Premium workspaces.
  • Enables workspace admins to manually enable Workspace visibility control setting on upgraded Standard-to-Premium workspaces.

5 details in Everything

Marketplace listing events system table now available (Public Preview) Stable

Public Preview of system.marketplace.listing_funnel_events system table for monitoring marketplace listing actions

Share AI models using Delta Sharing (Public Preview) Stable

Databricks workspaces enable sharing AI models via Delta Sharing.

Warehouse events system table is now available (Public Preview) Stable

A new system table captures SQL warehouse lifecycle events for monitoring and management purposes.

UI experience for OAuth app registration Stable

Adds UI experience to enable, disable, and modify custom and published OAuth applications.

  • Enables managing custom OAuth applications directly through the Databricks UI, including enabling and disabling capabilities.

1 detail in Everything

Reuse subnets across workspaces for customer-managed VPCs Stable

Enables sharing subnets across multiple Databricks workspaces for customer-managed VPCsVPCsVirtual Private Clouds — isolated, software-defined network environments inside a public cloud provider such as AWS, Azure, or GCP — give cyber tools a controlled network boundary with configurable routing, subnets, and access rules..

  • Adds the ability to share subnets for a customer-managed VPCVPCA logically isolated virtual network inside a public cloud provider's infrastructure, letting tools deploy resources with private addressing, controlled routing, and firewall rules without managing physical hardware. between multiple Databricks workspaces
  • Requires updated VPC configuration via Configure a customer-managed VPC

2 details in Everything

Databricks ODBC driver 2.7.7 Stable

Databricks ODBCODBCA standard API, maintained by Microsoft, for connecting applications to relational databases regardless of vendor. Cyber tools use it to query databases without writing engine-specific code. driver 2.7.7 adds Azure Managed Identity auth and token cache disable option.

  • Adds azure.managed_identity authentication method to enable Azure Managed Identity login
  • Adds the ability to disable the token cache for browser-based OAuth flows via configuration
  • Adds support for asynchronous metadata operations requiring server protocol SPARK_CLI_SERVICE_PROTOCOL_V9 or above
  • Adds support for Parameterized Query in Native Query Mode requiring server protocol SPARK_CLI_SERVICE_PROTOCOL_V8 or above

4 details in Everything

Was this useful?

Wazuh

v4.7.2

Wazuh v4.7.2 adds timeouts to Cloud/integrations and a Debian 12 SCASCASoftware composition analysis, identifying third-party dependencies and checking them for known vulnerabilities and license issues. It covers software a team uses rather than writes itself. policy

└──▷ GET THIS VERSION
$ git clone --branch v4.7.2 https://github.com/wazuh/wazuh.git
# already have the repo? check out this version:
$ git checkout v4.7.2
  • Adds configurable timeout setting to external and Cloud integration configurations to prevent indefinite waits

1 detail in Everything

Was this useful?

Sekoia.io

🚀 Playbooks enhanced with 3 new features 2 releases · 2024-01-29 → 2024-01-31 Stable

Sekoia.io playbooks gain a variable selector in node configs, click-to-add node chaining, and enhanced Run view with per-run condition context.

  • Run view now displays the exact playbook state and individual run logs for each execution history item
  • Input fields in node configuration now include a variable selector allowing direct insertion of variables from any node in 2 clicks
  • Playbook editor gains a click to add interaction that inserts a new node at the clicked location

3 details in Everything

1 more release in this issue · 2024-01-29 → 2024-01-31
New feature: Built-in roles Stable

Platform update enhancing user management with new pre-configured access levels.

Was this useful?
◆  Threat Intelligence

Feedly Threat Intelligence

Threat Intelligence updates — 2024-01-31 3 releases · 2024-01-03 → 2024-01-31 Stable

Feedly Threat Intelligence adds industry and platform filters to the TTPTTPTactics, techniques and procedures, the goals, methods and specific behaviors used by an attacker. They describe how an attack works, rather than only the files or addresses it leaves behind. Dashboard plus new threat actor detections.

  • Adds filtering by industry in the TTP Dashboard
  • Adds filtering by platform (e.g., macOS) in the TTP Dashboard
  • Adds New Threat Actors filter to the TTP Dashboard
  • Adds Threat Actors from filter (e.g. Threat Actors from China) to the TTP Dashboard
  • Makes six new threat actors discoverable: TAG-28, Flax Typhoon, Cyber Partisans, Caliente Bandits, Cotton Sandstorm, and Blackwood

5 details in Everything

2 more releases in this issue · 2024-01-03 → 2024-01-31
Threat Intelligence updates — 2024-01-17 Stable

Feedly Threat Intelligence adds CVE timeline highlights, TTPTTPTactics, techniques and procedures, the goals, methods and specific behaviors used by an attacker. They describe how an attack works, rather than only the files or addresses it leaves behind. platform filtering, and an interactive API developer site.

  • /api/threat-intelligence integration docs and testing via the new API Developer site for Threat and Market Intelligence customers
  • CVE timeline Highlights button to highlight specific events across all timelines
  • TTP Dashboard platform filter capability
  • New New Threat Actors model for threat actor analysis
  • New country-based Threat Actors from <Country> models for threat actor analysis

5 details in Everything

EclecticIQ integration Stable

EclecticIQ integration adds no-code STIXSTIXStructured Threat Information Expression, a standard format for describing threats, indicators and their relationships. It helps organizations exchange threat intelligence in a usable form. ingestion for threat data.

  • Adds the EclecticIQ integration for automatic ingestion of Feedly threats into EclecticIQ Intelligence Center as STIX objects
  • Adds ATT&CKATT&CKA publicly maintained knowledge base by MITRE cataloguing adversary tactics, techniques, and procedures observed in real attacks, giving cyber tools a common taxonomy for classifying and correlating threat behavior. description tooltips and links to Mitre ATT&CK in TTPTTPTactics, techniques and procedures, the goals, methods and specific behaviors used by an attacker. They describe how an attack works, rather than only the files or addresses it leaves behind. visualizations
  • Enables PDF export for the Threat Actor Insights Card
  • Adds article and targeted companies counts to bar charts in Threat Actor Insights Cards
  • Unlocks access to articles labeled Others in the Threat Actor Insights Card
+1 more show less
  • Displays an ex marker in Vulnerabilities section metadata to indicate exploit availability

6 details in Everything

Was this useful?

MISP

v2.4.183

MISP v2.4.183 adds ECSECSElastic Common Schema, an open specification maintained by Elastic that defines a standard field naming convention for log and event data, letting cyber tools share and correlate records without per-source field mapping. logging config, UUIDUUIDA universally unique identifier, usually a 128-bit value used to identify an object across systems. It is designed to make independently generated identifiers unlikely to collide. tag API, mass cluster tagging event view option, and new galaxy models.

└──▷ GET THIS VERSION
$ git clone --branch v2.4.183 https://github.com/MISP/MISP.git
# already have the repo? check out this version:
$ git checkout v2.4.183
  • Adds Security.ecs_log configuration key to enable Elastic Common Schema security logging
  • Adds Security.alert_on_suspicious_logins configuration key for security audit alerts
  • Sync configuration now supports sharing group blueprints to create filter rules based on dynamically updated organisation lists
  • Updated API tag functions to accept UUIDsUUIDsA universally unique identifier, usually a 128-bit value used to identify an object across systems. It is designed to make independently generated identifiers unlikely to collide. in addition to local IDs
  • Added mass local cluster tagging option in the [event:view] interface
+5 more show less
  • Parsing PE binary extensions within File observable objects improved via misp-stix library update
  • New flowintel CM object type available for MISP Objects
  • New disarm galaxy available with Actor Types, Countermeasures, Detections, and Techniques clusters
  • MITREMITREA US federally funded research and development center that maintains public frameworks—ATT&CK, CVE, D3FEND—that cyber tools use to classify threats, vulnerabilities, and defensive techniques in a common language. Atlas framework added to MISP Galaxy as Attack Pattern and Course of Action clusters
  • Sync configuration now supports sharing group blueprints for filter rule generation based on dynamically updated organisation lists

10 details in Everything

Was this useful?

Cloudmersive

Cloudmersive Cloud Virus API v8-5-4

Cloudmersive Cloud Virus API v8-5-4 adds .STEP/.STPSTPSpanning Tree Protocol, an IEEE standard (802.1D) that prevents Layer 2 network loops by electing a root bridge and blocking redundant switch paths, keeping Ethernet networks stable under failure conditions. file content verification support.

  • Includes general performance enhancements

1 detail in Everything

Was this useful?

OpenCTI

5.12.24 5 releases · 2024-01-15 → 2024-01-29 Stable

Adds confidence level controls for groups and users

└──▷ GET THIS VERSION
$ git clone --branch 5.12.24 https://github.com/OpenCTI-Platform/opencti.git
# already have the repo? check out this version:
$ git checkout 5.12.24
  • admin_tools now include managing max_confidence_level for Groups and Users
  • max_confidence_level can be managed at the Group level to filter entity visibility
  • confidence_level attribute is now available directly on Users

3 details in Everything

4 more releases in this issue · 2024-01-15 → 2024-01-29
5.12.22 Stable

OpenCTI 5.12.22 adds main observable type filter for Triggers and Widgets, plus configurable node-saml auth response signing.

└──▷ GET THIS VERSION
$ git clone --branch 5.12.22 https://github.com/OpenCTI-Platform/opencti.git
# already have the repo? check out this version:
$ git checkout 5.12.22
└──▷ HOW TO FIND IT
Restrict a Trigger or Widget to only process events where the primary observable matches a specific type (e.g., IP address).
📍In the Triggers or Widgets UI configuration, select main observable type from the new filter dropdown.
Control whether the SAMLSAMLA standard for passing signed identity assertions between a sign-in provider and an application. It lets a user sign in through their organization's identity provider. integration expects signed authentication responses for enhanced security posture.
📍Set the wantAuthnResponseSigned parameter in the node-saml configuration section of your environment variables.
  • main observable type filter available in Triggers and Widget configuration UIs
  • Configurable wantAuthnResponseSigned parameter for node-saml integration

2 details in Everything

5.12.21 Stable

OpenCTI 5.12.21 adds authenticated headers to audit logs and lets admins view user subscriptions at the entity level

└──▷ GET THIS VERSION
$ git clone --branch 5.12.21 https://github.com/OpenCTI-Platform/opencti.git
# already have the repo? check out this version:
$ git checkout 5.12.21
  • Adds information from authentication (headers) in audit logging
  • Enable administrators to view subscriptions made by users directly at the entity level

2 details in Everything

5.12.18 Stable

OpenCTI 5.12.18 adds a UI for creating relations in the Knowledge Graph.

└──▷ GET THIS VERSION
$ git clone --branch 5.12.18 https://github.com/OpenCTI-Platform/opencti.git
# already have the repo? check out this version:
$ git checkout 5.12.18
5.12.16 Stable

OpenCTI 5.12.16 adds SSOSSOSingle sign-on, using one identity provider to sign in to multiple applications. It reduces separate passwords and centralizes account and access management. via reverse proxy headers, /health endpoint, and nested contains_ref on Email Message

└──▷ GET THIS VERSION
$ git clone --branch 5.12.16 https://github.com/OpenCTI-Platform/opencti.git
# already have the repo? check out this version:
$ git checkout 5.12.16
  • Introduces /health endpoint for platform health checks
  • Adds support for contains_ref (nested relationship) on Email Message entities

2 details in Everything

Was this useful?

dnstwist

20240116

Adds HTTP proxy support with headless browser fingerprinting and a plural fuzzer engine to dnstwist

└──▷ GET THIS VERSION
$ git clone --branch 20240116 https://github.com/elceef/dnstwist.git
# already have the repo? check out this version:
$ git checkout 20240116
└──▷ TRY IT
Scan for domain variants using the new plural fuzzer through a corporate HTTP proxy.
$ dnstwist example.com --fuzzers plural --proxy http://proxy.example.com:8080
  • Adds --proxy flag for full HTTP proxy support, including headless browser (perceptual hashing) capabilities.
  • Adds new plural fuzzer option to --fuzzers argument.

2 details in Everything

Was this useful?

Yeti

2.1.2

Yeti 2.1.2 adds PATCH /observables endpoint and envvar precedence toggle

└──▷ GET THIS VERSION
$ git clone --branch 2.1.2 https://github.com/yeti-platform/yeti.git
# already have the repo? check out this version:
$ git checkout 2.1.2
  • PATCH /observables API endpoint added to allow updating specific observable fields without full replacement.
  • Config file precedence can be swapped with environment variable precedence via a new configuration option.

2 details in Everything

Was this useful?

Anomali

What's New in ThreatStream (2024) — 2024-01-30

ThreatStream adds MITRE ATT&CKMITRE ATT&CKA publicly maintained knowledge base of adversary tactics and techniques observed in real attacks, maintained by MITRE. Cyber tools use it as a common taxonomy to classify, map, and communicate threat behavior. framework integration in v14.1, enabling detection and analysis based on attack techniques.

Was this useful?
◆  Detection Engineering

Splunk Security Content

v4.23.0 2 releases · 2024-01-10 → 2024-01-30 Stable

Adds detection for Jenkins Server Vulnerabilities and numerous Kubernetes/Windows security analytics in ESCU v4.23.0

└──▷ GET THIS VERSION
$ git clone --branch v4.23.0 https://github.com/splunk/security_content.git
# already have the repo? check out this version:
$ git checkout v4.23.0
  • Adds Jenkins Server Vulnerabilities new Analytics Story for identifying compromised Jenkins instances.
  • Adds Splunk Information Disclosure in Splunk Add-on Builder detection capability.
  • Adds Windows MsiExec HideWindow Rundll32 Execution and Windows Process Injection In Non-Service SearchIndexer detections.
  • Adds new input macro sourcetype="kube:container:falco" for Falco data ingestion.

4 details in Everything

1 more release in this issue · 2024-01-10 → 2024-01-30
v4.19.0 Stable

Adds multiple new Kubernetes and Windows detection analytics in v4.19.0

└──▷ GET THIS VERSION
$ git clone --branch v4.19.0 https://github.com/splunk/security_content.git
# already have the repo? check out this version:
$ git checkout v4.19.0
  • Adds Kubernetes Anomalous Inbound Outbound Network IO analytic for monitoring network traffic ratios in Kubernetes clusters
  • Adds Kubernetes Previously Unseen Container Image Name analytic to detect novel container images
  • Adds Kubernetes Process Running From New Path analytic to flag unfamiliar process execution paths
  • Adds Windows UAC Bypass Suspicious Child Process analytic to detect potential privilege escalationprivilege escalationGaining permissions beyond those an account or process initially had. It can turn limited access into administrator control or access to another user's resources. via UAC bypass mechanisms
  • Adds Windows Alternate DataStream - Executable Content analytic to identify suspicious ADSADSAlternate Data Streams: an NTFS feature that lets a file carry hidden secondary data blobs under the same path, giving cyber tools a place to stash metadata or detect covert storage by malware. usage with executable payloads
+1 more show less
  • Updates ALL Azure AD analytics to use sourcetype = azure:monitor:aad for improved CIMCIMCommon Information Model, a DMTF-maintained standard schema for describing IT infrastructure resources like hardware, software, and networks, giving cyber tools a vendor-neutral way to query and manage system state. compliance

6 details in Everything

Was this useful?

Laurel

v0.5.6

Adds regex filter for raw audit lines and improves enrichment of short-lived processes

└──▷ GET THIS VERSION
$ git clone --branch v0.5.6 https://github.com/threathunters-io/laurel.git
# already have the repo? check out this version:
$ git checkout v0.5.6
  • New regular-expression-based filter for raw audit lines
  • Improvements in enrichment of data from short-lived processes

2 details in Everything

Was this useful?

pysigma

v0.11.1

pySigma v0.11.1 adds MapStringTransformation, two new SigmaCollection methods, and correlation without referenced rules.

└──▷ GET THIS VERSION
$ git clone --branch v0.11.1 https://github.com/sigmahq/pysigma.git
# already have the repo? check out this version:
$ git checkout v0.11.1
└──▷ USE IT
Audit a SigmaCollection to find rules that are loaded but never referenced by any other rule or correlation.
python
from sigma.collection import SigmaCollection

collection = SigmaCollection.load_ruleset(["./rules"])
unreferenced = collection.get_unreferenced_rules()
for rule in unreferenced:
    print(rule.title)
  • Adds MapStringTransformation / map_string transformation for mapping string values in Sigma rules.
  • Adds get_output_rules() and get_unreferenced_rules() methods to SigmaCollection for inspecting rule sets.
  • Supports backend correlation without referenced rules expressions.

3 details in Everything

Was this useful?

Tenzir

tenzir v4.8.1: AMQP static binary fix 2 releases · 2024-01-22 → 2024-01-23 Stable

Tenzir is a data pipeline engine for security teams that collects, transforms, enriches, and routes telemetry.

Tenzir v4.8.1 adds --profile support for Velociraptor and fixes AMQP static binary packaging

  • Adds --profile <profile> option to the velociraptor operator to support multiple configured instances
  • Enables amqp connector plugin in all static builds, previously unavailable in some configurations

2 details in Everything

1 more release in this issue · 2024-01-22 → 2024-01-23
tenzir v4.8.0: Diagnostics, lookup, and GELF support Stable

Tenzir v4.8.0 adds lookup, timeshift, delay, diagnostics, metrics operators and GELFGELFA structured log format created by Graylog that carries JSON payloads over UDP, TCP, or HTTP, giving cyber tools a compact, schema-aware alternative to syslog for shipping log data to centralised collectors. support

  • Introduces the lookup operator for live filtering of import feeds and historical query translation.
  • Adds the timeshift operator to adjust timestamps relative to a start time with optional speedup.
  • Adds the delay operator to delay events relative to a start time with optional speedup.
  • Introduces the gelf parser for reading Graylog Extended Log Format messages terminated by NULL bytes.
  • Adds the --header option to csv, tsv, ssv, and xsv parsers to manually set the header line.
+10 more show less
  • Adds the metrics operator to return internal metrics events, usable with metrics --live.
  • Introduces the time parser for parsing datetimes from arbitrary strings using strptime-like format strings.
  • Extends concept support to all operators that reference fields in events, not just the where operator.
  • Enables automatic collection and storage of disk, CPUCPUThe main general-purpose processor in a computer. It runs application instructions and coordinates work with memory and other hardware., and memory usage metrics on Tenzir nodes.
  • Adds the open_fds value to process metrics on Linux systems showing the number of open file descriptors.
  • Adds savers for http and https connectors and introduces the --form flag to submit URL-encoded request bodies.
  • Introduces the xsv --no-header option for csv, tsv, ssv, and xsv printers to omit header lines.
  • Adds support for years in RFC 3164RFC 3164The 2001 IETF specification that standardised the BSD syslog protocol, defining message format and UDP transport for system log data. Cyber tools use it to parse or emit legacy syslog reliably across heterogeneous infrastructure. syslog messages via the syslog parser.
  • Introduces the diagnostics operator to provide information about diagnostics a pipeline may encounter.
  • Switches the fluent-bit source operator to process MsgPack data directly instead of converting to JSON.

15 details in Everything

Was this useful?

SigmaHQ sigma-cli

v1.0.0

sigma-cli v1.0.0 adds correlation rule support, --force-install CLI flag, and plugin capability exposure

└──▷ GET THIS VERSION
$ git clone --branch v1.0.0 https://github.com/SigmaHQ/sigma-cli.git
# already have the repo? check out this version:
$ git checkout v1.0.0
└──▷ TRY IT
Force install a plugin that the CLI considers incompatible with the current version.
$ sigma-plugin install --force-install some-incompatible-plugin
View which capabilities a specific plugin exposes after installation.
$ sigma-plugin details some-plugin-name
  • Adds pySigma 0.11 backend integration enabling correlation rules processing within the CLI workflow.
  • Adds the --force-install (shortcut -f) CLI flag to bypass compatibility checks when installing plugins.
  • Enhances sigma-plugin list and sigma-plugin details commands to expose the full set of plugin capabilities.
  • Adds a post-installation check that detects incompatible pySigma versions after plugin installation and prompts for reinstallation.

4 details in Everything

Was this useful?
◆  Security Data Pipeline

Cribl

4.4.4

Cribl Stream 4.4.4 adds FIPSFIPSA set of US federal standards published by NIST that define approved cryptographic algorithms and modules; cyber tools use it to meet compliance requirements in government and regulated environments. mode (beta), load-balanced webhook destinations, and exponential backoff retry for HTTP-based sinks.

  • Adds FIPS Mode (Beta) for Customer Managed deployments to enforce FIPS compliant cryptography and password requirements
  • Adds load balancing support in the Webhook Destination with configurable weights and IP exclusion options
  • Adds exponential backoff retry configuration for HTTP-based Destinations including Google Chronicle, Azure Data Explorer, Dataset, and Elasticsearch

3 details in Everything

Was this useful?
Exposure & Vulnerability Management
◆  Security Validation (BAS & Automated Pentest)

Horizon3 NodeZero

NodeZero January 2024

NodeZero adds Phishing Impact Test, vertical attack pathattack pathA possible sequence of steps an attacker could take to reach a valuable target. It connects weaknesses, permissions and reachable systems rather than treating each finding separately. display, and new credential filters.

  • Launches the Phishing Impact Test to measure potential phishing impact, starting with the most susceptible employees.
  • Adds a Vertical Display option for Attack Paths alongside Concise/Detailed views for clearer security narrative.
  • Adds Filter by Injected Creds and Filter by Phished Creds table filters in Impacts, Weaknesses, and Credentials tables.
  • Enhances External Asset Discovery to identify status and warnings for potentially unauthorized hosts.

4 details in Everything

Was this useful?

Datadog Stratus Red Team

v2.13.0

Stratus Red Team v2.13.0 adds the ec2instanceconnect:SendSSHPublicKey technique to multiple instances

└──▷ GET THIS VERSION
$ git clone --branch v2.13.0 https://github.com/datadog/stratus-red-team.git
# already have the repo? check out this version:
$ git checkout v2.13.0
└──▷ USE IT
Execute lateral movementlateral movementMoving from an initially compromised system or identity to other resources in a network. Attackers often use stolen credentials or trusted connections to expand their access. via EC2EC2Amazon's cloud virtual-machine service, letting tools run on-demand servers without managing physical hardware. Instance Connect to inject SSH keys across a fleet.
shell
./stratus-red-team attack aws.lateral-movement.ec2-send-ssh-public-key --targets <instance_ids>
Was this useful?
◆  Vulnerability & Exposure Management

sploitscan

0.2

SploitScan v0.2 adds multi-CVE input support and JSON/CSV export capabilities

└──▷ GET THIS VERSION
$ git clone --branch 0.2 https://github.com/xaitax/SploitScan.git
# already have the repo? check out this version:
$ git checkout 0.2
└──▷ TRY IT
Scan multiple known vulnerabilities in one pass to generate a CSV report for incident response.
$ sploitscan -c CVE-2023-1234,CVE-2024-5678 --csv report.csv
  • sploitscan now accepts multiple CVE IDs in a single execution rather than requiring separate runs per ID.
  • Adds --json and --csv flags to export scan results to JSON or CSV files.
  • The output format for individual CVE details has been restructured to improve visual differentiation and layout.

3 details in Everything

Was this useful?

defectdojo

2.30.3 2 releases · 2024-01-02 → 2024-01-22 Stable

Adds First Seen parser flag to DefectDojo settings.

└──▷ GET THIS VERSION
$ git clone --branch 2.30.3 https://github.com/DefectDojo/django-DefectDojo.git
# already have the repo? check out this version:
$ git checkout 2.30.3
  • Adds the FIRST_SEEN setting to settings.dist.py or local_settings.py to control how first seen timestamps are handled during parsing.

1 detail in Everything

1 more release in this issue · 2024-01-02 → 2024-01-22
2.30.0 Stable

DefectDojo 2.30 adds MS Defender parser, ProwlerV3 component_name support, and product/engagement filtering on unset properties

└──▷ GET THIS VERSION
$ git clone --branch 2.30.0 https://github.com/DefectDojo/django-DefectDojo.git
# already have the repo? check out this version:
$ git checkout 2.30.0
  • Improve Trivy package path parsing behavior
  • Add Kubernetes cluster resource object support in Trivy
  • Allow filtering Products and Engagements on unset properties
  • Store CVSSCVSSCommon Vulnerability Scoring System, a method for describing a vulnerability's characteristics and severity. Its score is not the probability that attackers will exploit it. score and vector during Whitesource imports
  • Import all vulnerabilities when no asset IDs given to api_client
+1 more show less
  • Improve Request Review Notifications

6 details in Everything

Was this useful?

Tenable

Tenable One 2024 Release Notes — Attack Path January 30, 2024 10 releases · 2024-01-05 → 2024-01-30 Stable

Tenable One adds Path Priority Rating metric, Attack Path Summarization via GenAI, and Asset Query Builder for discovery.

  • Introduces the Path Priority Rating metric which prioritizes attack pathsattack pathsA possible sequence of steps an attacker could take to reach a valuable target. It connects weaknesses, permissions and reachable systems rather than treating each finding separately. based on source exposure, target criticality, and path step count
  • Adds Attack Path Summarization capability to transform graphical attack paths into natural language titles and executive summaries via Generative AI
  • Enables separate asset node search within the Discover landing page using the new Asset Query Builder interface
  • Changes the default view of the Discover landing page to display top attack paths

4 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Path Priority Rating has been renamed to Choke Point Priority and now prioritizes attack techniques rather than attack paths
9 more releases in this issue · 2024-01-05 → 2024-01-30
Tenable One Vulnerability Management 2024 Release Notes — January 23, 2024 Stable

New License Information page with visual overviews, snapshots, and resource counts.

  • Adds a redesigned License Information page available to all users in Tenable One.

1 detail in Everything

Tenable One 2024 Release Notes — Tenable One January 23, 2024 Stable

Tenable One adds a redesigned License Information page with visual product/time-based overviews.

  • Adds a redesigned License Information page available to all users in Tenable One for viewing cloud license details.

1 detail in Everything

Tenable One Web App Scanning 2024 Release Notes — January 23, 2024 Stable

Tenable One Web App Scanning adds a redesigned License Information page with visual trends and usage snapshots.

  • Adds a redesigned License Information page accessible in the cloud console for all users.

1 detail in Everything

Tenable One 2024 Release Notes — Attack Path January 22, 2024 Stable

Tenable One adds support for Windows Credential Manager techniques and APT28, APT33, Scattered Spider, Lockbit_3.0, Medusa trending attack pathsattack pathsA possible sequence of steps an attacker could take to reach a valuable target. It connects weaknesses, permissions and reachable systems rather than treating each finding separately..

  • Adds MITRE ATT&CKMITRE ATT&CKA publicly maintained knowledge base of adversary tactics and techniques observed in real attacks, maintained by MITRE. Cyber tools use it as a common taxonomy to classify, map, and communicate threat behavior. technique detection for Windows Credential Manager to Attack Path analysis

1 detail in Everything

Tenable One Vulnerability Management 2024 Release Notes — January 18, 2024 Stable

Tenable One adds Compute and Serverless field visibility to the redesigned License Information page.

Tenable One Web App Scanning 2024 Release Notes — January 16, 2024 Stable

Adds vulnerability state tracking to WAS Findings and purges non-VM data older than 90 days

  • Adds vulnerability state tracking to WAS Findings, allowing users to see whether vulnerabilities are new, active, fixed, or resurfaced

1 detail in Everything

└──▷ BREAKING ON UPGRADE
  • !Non-VM data older than 90 days is no longer displayed in WAS Findings (only available in historical scan results)
Tenable One Vulnerability Management 2024 Release Notes — January 16, 2024 Stable

Redesigned global header in Tenable One Vulnerability Management streamlining access to profile and platform settings.

  • Global header restyled to align with new branding and improve navigation to personal profile and platform settings.

1 detail in Everything

Tenable One Vulnerability Management 2024 Release Notes — January 12, 2024 Stable

Adds single-line command installation and linking for Nessus scanners and Agents.

  • Supports a single-line command installation method for Tenable Nessus scanners and Tenable Agents.
  • Allows specifying sensor name and group assignment within the single-line command.

2 details in Everything

Tenable One OT Exposure 3.17.40 SP (2024-01-05) Stable

Tenable One OT Exposure 3.17.40 SP adds Oracle Linux 8 support with ERSPANERSPANA Cisco-originated GRE-based tunneling protocol that encapsulates mirrored network traffic and ships it across Layer 3 to a remote capture point, letting cyber tools analyze traffic from distant segments without local tap hardware. passive monitoring and Network Monitor 6.3.1 integration.

  • Adds Oracle Linux 8 as a supported installation platform for Tenable Core
  • Enables ERSPAN traffic feeds for passive monitoring on Oracle Linux 8

2 details in Everything

Was this useful?

Edgescan

Release Notes - 26th January 2024 2 releases · 2024-01-09 → 2024-01-26 Stable

Adds configurable chart types for Risk/Severity/threat and URL export from scan history UI

  • Customers can now export all crawled URLs from the last scan via a new button in the User Interface.
  • Allows configurable chart types for Risk, Severity & threat data visualizations.

2 details in Everything

1 more release in this issue · 2024-01-09 → 2024-01-26
Release Notes - 9th January 2024 Stable

Edgescan updates query logic for non-closed vulnerabilities and export visibility for disabled assets

  • Adds ability to query vulnerabilities with status not equal to closed, combining risk accepted and open statuses into a single view
  • Ensures disabled assets appear in relevant exports and dashboards

2 details in Everything

Was this useful?

Artemis

v2.5.0

Artemis v2.5.0 adds Humble security header scanner module

└──▷ GET THIS VERSION
$ git clone --branch v2.5.0 https://github.com/CERT-Polska/Artemis.git
# already have the repo? check out this version:
$ git checkout v2.5.0
  • Adds the Humble module to scan for HTTP security headers

1 detail in Everything

Was this useful?

OSV-Scanner

v1.6.2 2 releases · 2024-01-18 → 2024-01-31 Stable

OSV-Scanner v1.6.2 adds top-level scan subcommand, PDM lockfile support, and dependency groups to flattened output.

└──▷ GET THIS VERSION
$ git clone --branch v1.6.2 https://github.com/google/osv-scanner.git
# already have the repo? check out this version:
$ git checkout v1.6.2
  • scan is now the top-level subcommand; omitting a command defaults to scan
  • Adds pdm.lock lockfile detection and parsing
  • Flattened vulnerability output now includes dependency_group field

3 details in Everything

1 more release in this issue · 2024-01-18 → 2024-01-31
v1.6.1 Stable

OSV-Scanner v1.6.1 adds NuGetNuGetMicrosoft's package manager for .NET, hosting a public registry of reusable libraries so tools can pull in dependencies without bundling or manually maintaining third-party code. lock file v2 support and --ignore-vulns flag

└──▷ GET THIS VERSION
$ git clone --branch v1.6.1 https://github.com/google/osv-scanner.git
# already have the repo? check out this version:
$ git checkout v1.6.1
└──▷ TRY IT
Scan a .NET project allowing non-blocking output for CI workflows.
$ osv-scanner --lockfile nuget.lock --ignore-vulns CVE-2023-1234
  • Adds support for scanning NuGet lock files version 2.
  • Adds the --ignore-vulns option to skip failing on vulnerability findings for GitHub ActionsGitHub ActionsGitHub's built-in CI/CD system that runs automated workflows triggered by repository events, letting cyber tools automate testing, building, and releasing without managing separate pipeline infrastructure..

2 details in Everything

Was this useful?

Brinqa

11.18.19

Brinqa 11.18.19 introduces the Administrator dashboard and expands Brinqa Conditional Language (BCL) operators for one-to-many relationships.

  • Adds the Brinqa Administrator dashboard for monitoring environment performance and identifying emerging issues
  • Enables '> , <, =' operators in one-to-many relationships within the Brinqa Conditional Language (BCL)

2 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Upgrading from any version prior to 11.17.16 requires contacting the Brinqa team for a code scan because security constraints now block custom code in calculation scripts, flow scripts, and UDLs that could break deployments
Was this useful?
◆  Endpoint Management (UEM/RMM)

Munki

v6.4.2 2 releases · 2024-01-02 → 2024-01-25 Stable

Munki v6.4.2 adds IgnoreMiddleware preference to toggle middleware without reinstalling.

└──▷ GET THIS VERSION
$ git clone --branch v6.4.2 https://github.com/munki/munki.git
# already have the repo? check out this version:
$ git checkout v6.4.2
1 more release in this issue · 2024-01-02 → 2024-01-25
v6.4.0 Stable

Munki 6.4.0 adds board-id/device-id facts and experimental installable_condition_disabled pkginfo key

└──▷ GET THIS VERSION
$ git clone --branch v6.4.0 https://github.com/munki/munki.git
# already have the repo? check out this version:
$ git checkout v6.4.0
  • Adds new built-in conditional facts for hardware detection: board-id (for Intel Macs) and device-id (for Apple silicon Macs)
  • Adds experimental support for detecting macOS installer hardware compatibility via the installable_condition_disabled key in generated pkginfo

2 details in Everything

Was this useful?

Sophos Mobile

2023.52Released on January 9, 2024

Sophos Mobile 2023.52 adds macOS 14 (Sonoma) support and ends Sophos container support

  • Removes support for macOS 10.14 (Mojave)
  • Ends support for the Sophos Secure Email and Sophos Secure Workspace container apps

2 details in Everything

└──▷ BREAKING ON UPGRADE
  • !macOS 10.14 (Mojave) is no longer supported
  • !Sophos Secure Email and Sophos Secure Workspace container apps are no longer supported
Was this useful?

Fleet

fleet-v4.43.2 2 releases · 2024-01-09 → 2024-01-22 Stable

Fleet v4.43.2 adds free tier UI states, fixes HTTP 204 handling, and improves MDMMDMMobile device management, centrally configuring and managing enrolled devices. Administrators use it to apply settings, distribute applications and enforce device security policies. polling reliability.

└──▷ GET THIS VERSION
$ git clone --branch fleet-v4.43.2 https://github.com/fleetdm/fleet.git
# already have the repo? check out this version:
$ git checkout fleet-v4.43.2
  • Adds free tier UI state to the OS updates and setup experience pages
  • Improves HTTP client in fleetctl and fleetd to correctly handle 204 No Content responses without errors
  • Displays warning and info messages when downgrading or upgrading fleetd or OSQuery

3 details in Everything

1 more release in this issue · 2024-01-09 → 2024-01-22
fleet-v4.43.0 Stable

Fleet v4.43 adds synchronous live query endpoint, device mapping APIs, and custom email bundling

└──▷ GET THIS VERSION
$ git clone --branch fleet-v4.43.0 https://github.com/fleetdm/fleet.git
# already have the repo? check out this version:
$ git checkout fleet-v4.43.0
└──▷ TRY IT
Execute a live osquery query and wait for the synchronous result set.
$ curl -X POST https://fleet-server/api/v1/fleet/queries/{query_id}/run \
  -H 'Authorization: Bearer <token>' \
  -H 'Content-Type: application/json' \
  -d '{"parameters": {}}'
Associate a custom email address with a host for MDMMDMMobile device management, centrally configuring and managing enrolled devices. Administrators use it to apply settings, distribute applications and enforce device security policies. enrollment profiles.
$ curl -X PUT https://fleet-server/api/fleet/orbit/device_mapping \
  -H 'Authorization: Bearer <token>' \
  -H 'Content-Type: application/json' \
  -d '{"device_mapping": {"email": "user@example.com"}}'
Bundle a custom end-user email into an MSI installer using fleetctl.
$ fleetctl package --end-user-email user@example.com
  • Adds POST /api/v1/fleet/queries/:id/run endpoint for synchronous live queries.
  • Adds PUT /api/fleet/orbit/device_mapping and PUT /api/v1/fleet/hosts/{id}/device_mapping endpoints for setting or replacing custom email addresses.
  • Adds experimental --end-user-email flag to fleetctl package for .msi installer bundling.
  • Adds host_count_updated_at to policy API responses.
  • Adds ability to query by host display name via list hosts endpoint.
+3 more show less
  • Adds gigs_total_disk_space to host endpoint responses.
  • Adds ability to remotely configure fleetd update channels in agent options (Fleet Premium only, requires fleetd >= 1.20.0).
  • Extends script execution timeout to 5 minutes.

8 details in Everything

Was this useful?
◆  Patch Management

macadmins Nudge

v1.1.13.81510

Nudge v1.1.13.81510 adds screenshot alt-text support and fixes legacy LaunchAgent loading

└──▷ GET THIS VERSION
$ git clone --branch v1.1.13.81510 https://github.com/macadmins/nudge.git
# already have the repo? check out this version:
$ git checkout v1.1.13.81510
  • Adds screenShotAltText property to the UpdateElement config model to provide accessibility text for update screenshots

1 detail in Everything

Was this useful?
◆  Vulnerability & Exposure Management

ProjectDiscovery Cloud

0.6 2 releases · 2024-01-08 → 2024-01-17 Stable

v0.6 adds scan exports in JSONLJSONLA text format where each line is a self-contained, valid JSON object, making it easy to stream, append, and process large datasets line by line without parsing a full JSON array into memory./CSV/PDF, early template access for Teams, and optional offset/limit in API

  • Adds the ability to export individual scan results as JSONL, CSV, or PDF.
  • Adds early template access (including exclusive PD Research Team templates) for users on the Teams tier and above.
  • Makes the offset and limit API parameters optional instead of required.

3 details in Everything

1 more release in this issue · 2024-01-08 → 2024-01-17
0.5 Stable

v0.5 adds vulnerability status management, team invite flows, and optional static IP sourcing for Nuclei scans.

  • Adds Vulnerability Status Filter allowing users to update statuses (open/closed/false positive) and auto-mark false matcher results as fixed.
  • Adds team creation and invitation support, allowing owners to invite members to share resources.
  • Enables Nuclei scans from static IPs via an opt-in enterprise feature accessible under the settings option.

3 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Accepting a team invite with an existing account results in loss of access to existing user data on the platform (reversible by removing oneself from the team).
Was this useful?

runZero

4.0.240122.0 2 releases · 2024-01-12 → 2024-01-22 Stable

An asset discovery and inventory platform that identifies and maps all devices on networks without requiring agents.

runZero v4.0.240122 adds recent/available query display in datagrid search bar and improves RHELRHELRed Hat Enterprise Linux, a commercially supported Linux distribution maintained by Red Hat, chosen by cyber tools for its long support lifecycle, certified hardware compatibility, and enterprise deployment prevalence. fingerprinting.

  • Adds display of recent queries and available queries from the query library to the datagrid search bar
  • Improves fingerprinting accuracy for Red Hat Enterprise Linux and derivatives using Tenable product data

2 details in Everything

1 more release in this issue · 2024-01-12 → 2024-01-22
4.0.240112.0 Stable

runZero 4.0.240112.0 adds a Site column to task lists and improves fingerprinting.

  • All task lists in the task overview now include a Site column
  • Fingerprint improvements

2 details in Everything

Was this useful?

Intruder

Metrics matter: why we've added analytics to show your progress

Intruder adds an Analytics page tracking issues, scan frequency, and attack surfaceattack surfaceThe exposed systems, interfaces and access points an attacker could try to use. It includes internet-facing services as well as identities, software and other reachable resources. changes over time via new UI widgets.

  • Adds a new Analytics tab to the web interface that tracks vulnerability remediation progress, emerging threat check performance, and attack surface changes over selectable time ranges.
  • Introduces Issues section metrics: Open issues, New issues, Fixed issues, and Days to fix (average days to remediate by severity) for trend analysis.
  • Introduces Monitor Progress section metrics: Emerging threats (count, severity breakdown, pass/fail), Days between scans (total assessments and mean interval), and Cyber hygiene score.
  • Introduces Attack Surface section metrics: Most vulnerable targets (un-remediated occurrences by target), New services (discovered during period), and Scanned targets.

4 details in Everything

Was this useful?
Identity, Access & Data Protection
◆  Identity & Access Management

1Password

1Password for iOS 8.10.24 22 releases · 2024-01 Stable

1Password for iOS 8.10.24 adds passkeypasskeyPhishing-resistant sign-in credentials built on FIDO2/WebAuthn: the device holds a private key and proves possession instead of the user typing a password. They sync across a user's devices. OTPOTPOne-time password: a short-lived numeric or alphanumeric code valid for a single authentication attempt, generated via TOTP or HOTP standards, giving cyber tools phishing-resistant second-factor verification without stored shared secrets. auto-copy, larger multi-item maps, and satellite mode in Labs.

  • passkey one-time passwords are automatically copied to the clipboard when signing in with a passkey

1 detail in Everything

7 more releases in this issue 21 more releases in this issue · 2024-01
1Password for Mac 8.10.24 Stable

1Password for Mac 8.10.24 adds Secure Notes search and Watchtower SSH key insights

  • Search now matches text inside Secure Notes, displaying results in the dropdown under the search bar

1 detail in Everything

1Password for Windows 8.10.24 Stable

1Password for Windows 8.10.24 adds developer credential insights in Watchtower and Secure Notes search.

  • Watchtower now includes insights about developer credentials to help diagnose and remediate security issues found with SSH keys stored on disk

1 detail in Everything

1Password for Linux 8.10.24 Stable

Watchtower adds developer credential insights for SSH key remediation.

1Password for Android 8.10.24 Stable

New autofill draft saving and automatic OTPOTPOne-time password: a short-lived numeric or alphanumeric code valid for a single authentication attempt, generated via TOTP or HOTP standards, giving cyber tools phishing-resistant second-factor verification without stored shared secrets. clipboard copy on passkeypasskeyPhishing-resistant sign-in credentials built on FIDO2/WebAuthn: the device holds a private key and proves possession instead of the user typing a password. They sync across a user's devices. sign-in.

  • Automatically copies an item's one-time password to the clipboard when signing in via passkey if one is present
  • Adds ability to save or discard drafts of items created during autofill

2 details in Everything

1Password SCIM Bridge 2.9.0 Stable

1Password SCIMSCIMA standard for creating, updating and removing user accounts and groups across applications. It helps an identity provider keep access in sync when people join, change roles or leave. Bridge 2.9.0 adds arm64 Docker support and detailed logging fields.

  • Docker images now support arm64 architectures
  • Logs now include the hostname and a unique instance_id for easier identification in deployments with multiple replicas

2 details in Everything

1Password in the browser 2.19.0 Stable

1Password in the browser 2.19.0 adds Firefox setup icon toggles, Edge pinning instructions, passkeypasskeyPhishing-resistant sign-in credentials built on FIDO2/WebAuthn: the device holds a private key and proves possession instead of the user typing a password. They sync across a user's devices. UI fixes, and site-specific autofill improvements.

  • Adds an option to enable or disable app and website icons during initial Firefox extension setup
  • Shows pin-to-toolbar instructions during first-time setup for Firefox or Edge extensions
  • Displays a notification with a toggle in the pop-up when Autofill is disabled
  • Enables one-time password filling on business.facebook.com (Japanese locale)
  • Automatically suggests usernames on apple.com and icloud.com sign-in pages
+2 more show less
  • Improves save/fill reliability for logins on connect.sunlife.ca
  • Suggests new passwords when adding users on admin.microsoft.com

7 details in Everything

1Password SaaS Manager January 2024 Stable

1Password SaaSSaaSSoftware delivered over the internet and billed by subscription, hosted and operated by the vendor so the buyer skips installation and infrastructure management. Manager adds beta access requests via App Hub/Slack, Teams notifications, workflow merge fields, and flexible column exports

  • Adds Access tab to managed apps for configuring user-requested app access (beta)
  • Allows end users to raise access requests via SaaS Manager’s Slack App
  • Enables approval handling with a single button click in Slack
  • Supports automatic provisioning of access using direct integration or Okta assignment
  • Configures manual provisioning via task assignment to the app’s IT admin role when no suitable integration exists
+6 more show less
  • Allows definition of distinct Access levels (e.g., free/paid license, standard/admin) for requested apps
  • Permits configuring a default approval chain and customizing it per access level
  • Adds ability to send all notifications via Microsoft Teams through Settings > Notifications
  • Enables workflow steps to send email to any To/Cc recipient instead of only specified SaaS Manager persons
  • Provides more flexible merge field options for workflow email, Slack, and Microsoft Teams message steps (e.g., date format, name variation)
  • Adds Export visible columns option in list views by unchecking Export all columns

11 details in Everything

1Password for Android 8.10.26-11 (Beta) Pre-release

1Password for Android Beta adds large map view and search highlight for notes.

  • Highlights content from note items or fields under item titles during search results for easier skimming

1 detail in Everything

1Password for Linux 8.10.26-11 (Beta) Pre-release

Search dropdown highlights note content alongside item titles for faster scanning in 1Password for Linux.

1Password for iOS 8.10.26-11 (Beta) Pre-release

Beta release improves search readability and simplifies initial setup for new accounts with few items.

  • Search results now highlight content from note items or fields under item titles for easier skimming
  • Adds 'Have passwords saved elsewhere?' option at the bottom of item lists when account has 10 or fewer items to open an import guide

2 details in Everything

1Password for Windows 8.10.26-11 (Beta) Pre-release

1Password for Windows Beta adds search result highlighting for notes and fields

  • The search dropdown now highlights content from note items or fields beside item titles for easier skimming

1 detail in Everything

1Password for Mac 8.10.26-11 (Beta) Pre-release

Search dropdown highlights content from note items/fields beside titles in 1Password for Mac beta.

  • Adds highlighting of content from note items or fields next to item titles in the search dropdown
  • Improves Universal Autofill reliability when triggered while 1Password is locked

2 details in Everything

1Password in the browser 2.20.2 (Beta) Pre-release

Updated account add page, Safari field filtering, multi-site autofill, and Watchtower item descriptions.

  • Adds an updated page for adding a new account when installing 1Password in the browser for the first time
  • Enables typing to filter results under fields in Safari
  • Respects Autofill behaviors when a Login item has multiple websites
  • Improves descriptions and suggestions for items in the Items in another account Watchtower category

4 details in Everything

1Password for Android 8.10.26-2 (Beta) Pre-release

1Password for Android 8.10.26-2 adds passkeypasskeyPhishing-resistant sign-in credentials built on FIDO2/WebAuthn: the device holds a private key and proves possession instead of the user typing a password. They sync across a user's devices. unlock for SSOSSOSingle sign-on, using one identity provider to sign in to multiple applications. It reduces separate passwords and centralizes account and access management. accounts and location suggestions in Labs.

  • Adds ability to unlock a 1Password account that uses SSO when you save or sign in with a passkey.

1 detail in Everything

1Password for Mac 8.10.26-1 (Beta) Pre-release

1Password for Mac 8.10.26-1 beta updates LastPass import redirect URI and refines UX flows.

  • Removes the What's New view from the initial app setup flow

1 detail in Everything

1Password for Windows 8.10.26-2 (Beta) Pre-release

1Password for Windows 8.10.26-2 Beta introduces LastPass import via local HTTP redirect and Watchtower description improvements.

  • New http://127.0.0.1:18255/import/redirect URI for LastPass data import when using Entra IDEntra IDMicrosoft's cloud-based identity and access management service, formerly Azure Active Directory, used by cyber tools to authenticate users and enforce access policies in Microsoft 365 and Azure environments. authentication
  • Updated descriptions and suggestions in the Items in another account Watchtower category

2 details in Everything

1Password for Linux 8.10.24-35 (Beta) Pre-release

1Password for Linux 8.10.24-35 Beta adds Secure Notes search and SSOSSOSingle sign-on, using one identity provider to sign in to multiple applications. It reduces separate passwords and centralizes account and access management. session lock behavior

  • Search now indexes text within Secure Notes to display matches in the dropdown results under the search bar.
  • The app locks immediately when you ignore the SSO sign-in prompt after your session has expired.

2 details in Everything

1Password in the browser 2.20.0 (Beta) Pre-release

1Password in the browser 2.20.0 (Beta) adds SSOSSOSingle sign-on, using one identity provider to sign in to multiple applications. It reduces separate passwords and centralizes account and access management. tab cleanup, improved password field wrapping, login suggestions for Zoom and OpenRouterOpenRouterA unified API gateway that routes requests to dozens of LLM providers under one endpoint, letting cyber tools swap or compare models without rewriting provider-specific integration code., and Twitter username filling.

  • After you successfully sign in to your account with SSO, the tab that was opened to initiate the sign-in will close.
  • Logins are now suggested on zoom.us when linking your Zoom account to a Google account.
  • The registration form on openrouter.ai is now recognized correctly.

3 details in Everything

1Password for iOS 8.10.24-30 (Beta) Pre-release

1Password for iOS adds satellite map view and clipboard auto-copy for passkeypasskeyPhishing-resistant sign-in credentials built on FIDO2/WebAuthn: the device holds a private key and proves possession instead of the user typing a password. They sync across a user's devices. TOTPTOTPA one-time password algorithm (RFC 6238) that generates short-lived codes from a shared secret and the current time, giving cyber tools phishing-resistant second-factor authentication without a server round-trip.

  • Adds satellite map mode when Add locations to items is enabled in Settings > Labs
  • Automatically copies the one-time password to the clipboard after signing in with a passkey, if present

2 details in Everything

1Password for Windows 8.10.24-35 (Beta) Pre-release

1Password for Windows adds Secure Note search support and SSOSSOSingle sign-on, using one identity provider to sign in to multiple applications. It reduces separate passwords and centralizes account and access management. session lock behavior.

  • Search now uses text from Secure Notes to display matches in dropdown results
  • App locks automatically when ignoring the SSO sign-in prompt after session expiry

2 details in Everything

1Password for Mac 8.10.24-35 (Beta) Pre-release

1Password for Mac 8.10.24-35 Beta adds Secure Note search and SSOSSOSingle sign-on, using one identity provider to sign in to multiple applications. It reduces separate passwords and centralizes account and access management. session locking.

  • Search now uses text in Secure Notes to display matches in dropdown results
  • App locks automatically when ignoring the SSO sign-in prompt after session expiry

2 details in Everything

Was this useful?

JumpCloud

January 30, 2024 3 releases · 2024-01-03 → 2024-01-30 Stable

JumpCloud adds starts with operator to dynamic groups and Hostname attribute for device groups.

  • Adds startsWith operator to Dynamic User Groups (limited to one Value).
  • Adds Hostname attribute to Dynamic Device Groups (supports equals, not equals, and starts with operators).

2 details in Everything

2 more releases in this issue · 2024-01-03 → 2024-01-30
January 10, 2024 Stable

JumpCloud adds multiple values for the not equals operator in dynamic user and device groups

  • Supports multiple values for the not equals operator in dynamic user and device group filters
  • Enables exclusion logic where users/devices are added if they are not assigned to any of a specified list of departments

2 details in Everything

January 3, 2024 Stable

JumpCloud adds a Billing Only role for invoice access and support ticket creation

  • Billing Only Role allows viewing invoices and billing information
  • Billing Only Role grants access to Support and the ability to create support tickets

2 details in Everything

Was this useful?

topaz

v0.30.25

Topaz v0.30.25 adds developer tooling for certificate management and local template loading, plus a new gRPCgRPCAn open-source remote procedure call framework from Google that uses HTTP/2 and Protocol Buffers to let services call each other's functions across a network, giving tools low-latency, strongly typed inter-process communication. health check endpoint.

└──▷ GET THIS VERSION
$ git clone --branch v0.30.25 https://github.com/aserto-dev/topaz.git
# already have the repo? check out this version:
$ git checkout v0.30.25
  • Adds topaz dev certs subcommands for managing development certificates
  • Enables loading authorization templates from the local filesystem via topaz templates list
  • Introduces a gRPC health probe endpoint for service readiness checks

3 details in Everything

Was this useful?

Ory

Improved OAuth2 performance and export of JWKs via CLI 7 releases · 2024-01-09 → 2024-01-19 Stable

Ory CLI gains a new JWK export command and OAuth2OAuth2An open authorization framework (RFC 6749) that lets a service grant limited access to a user's resources on another service without exposing credentials, giving cyber tools a standard way to authenticate against third-party APIs. flows see performance improvements.

  • OAuth2 request processing has been optimized for improved response times.

1 detail in Everything

6 more releases in this issue · 2024-01-09 → 2024-01-19
Customizing form labels on logins Stable

Ory allows customizing the identifier input label on login screens to match identity schema titles

  • Login screen now uses the default identity schema identifier title as the input label instead of the static ID text when a single identifier is present

1 detail in Everything

Track events in Ory Network live with advanced filtering Stable

Ory Network adds an Events Page with filtering options and live streaming for tracking project activities.

  • Adds an Events page in the Ory Network Console to track live project activities
  • Enables filtering of events by type, including Identity, Permission, OAuth2OAuth2An open authorization framework (RFC 6749) that lets a service grant limited access to a user's resources on another service without exposing credentials, giving cyber tools a standard way to authenticate against third-party APIs., and Project categories
  • Previously announced live event streaming can send events to user infrastructure; it is available for Ory Network Enterprise.

3 details in Everything

Stream live event data in Ory Network Stable

Enterprise customers can pipe real-time identity events directly to external infrastructure for analytics and audits.

Additional id token audiences are now allowed Stable

Ory allows specifying additional ID token audiences in OIDCOIDCOpenID Connect, a sign-in protocol built on OAuth 2.0. An application uses identity information from a trusted provider instead of maintaining a separate password for each user. flows for native apps.

  • Adds support for configuring a list of additional id token audiences in OIDC flows.

1 detail in Everything

Refined search and filtering for identities endpoint Stable

Adds ids query parameter to GET /admin/identities endpoint for targeted identity retrieval.

  • Allows filtering GET /admin/identities results by individual IDs via the ids query parameter

1 detail in Everything

Native recovery support Stable

Ory Kratos adds native API client support for account recovery flows.

  • Enables initiating the recovery flow directly from native API clients like mobile apps instead of relying on browser-based redirection.

1 detail in Everything

Was this useful?

Stytch

2024.01.26 | TOTP and Recovery Codes for MFA

Adds TOTPTOTPA one-time password algorithm (RFC 6238) that generates short-lived codes from a shared secret and the current time, giving cyber tools phishing-resistant second-factor authentication without a server round-trip. and Recovery Codes as MFAMFAMulti-factor authentication, requiring proof from different categories, such as a password and a hardware key, to sign in. It reduces reliance on a password alone. methods with organization-level enforcement and member enrollment controls

  • Supports totp in the allowed_mfa_methods array for MFA policy enforcement at the Organization level.
  • Enables mfa_enrolled: true and default_mfa_method: "totp" on the Member object to opt in TOTP for individual users.
  • Introduces Recovery Codes generation, fetching, and rotation capabilities for members who lose their TOTP device.

3 details in Everything

Was this useful?
◆  Backup & Recovery

Acronis Cyber Protect

2024-01

Acronis Cyber Protect combines backup, disaster recovery, and endpoint protection in one platform for businesses and managed service providers.

Acronis merges EDREDREndpoint detection and response, monitoring computers for suspicious behavior and providing investigation and response controls, such as isolating a device. into Advanced Security pack; adds DLPDLPData Loss Prevention: a category of controls that inspect and block sensitive data from leaving an organisation via email, web, or removable media, giving cyber tools a policy enforcement layer over data in motion and at rest. Organization map and precise MSPMSPA managed service provider, a company that operates IT services for customers. It may manage systems, networks, backups or other ongoing technology needs. pricing.

└──▷ HOW TO FIND IT
Use the Organization map to group users by activity for targeted DLP policy application.
📍In Advanced DLP, open the Organization map, select active users, and apply Data Flow Policy rules to the created groups.
Monitor CyberApp integration adoption and deployment locations via the vendor dashboard.
📍Log in to the Acronis Vendor Portal and navigate to the usage statistics dashboard for your CyberApp.
  • Advanced Security functionality is merged with the Advanced Security + EDR pack, making EDR a core component of the renamed Advanced Security + EDR subscription tier.
  • New Organization map feature in Advanced DLP tracks active users to group them for applying Data Flow Policy rules.
  • Managed Service Providers can configure product costs and prices with four digits after the decimal separator in contracts, quotes, and sales items.
  • Third-party vendors (ISVs) gain access to a usage statistics dashboard showing partner/customer counts and Acronis Datacenter deployment details for their CyberApp integrations.
  • Asio Backup Dashboard integration updates to report VM validation status as the DR Readiness value.

5 details in Everything

Was this useful?

Druva

AWS Workloads Archived Release Notes 2024: January 29, 2024 7 releases · 2024-01-06 → 2024-01-29 Stable

Druva is a SaaS data protection platform that backs up enterprise workloads, endpoints, and SaaS applications and restores them after ransomware.

Druva AWS Workloads adds Root volume only AMI option within AMI Options for EC2EC2Amazon's cloud virtual-machine service, letting tools run on-demand servers without managing physical hardware. backup policies.

  • Adds a Root volume only AMI toggle in AMI Options to create an AMI exclusively for the root volume alongside the complete snapshot.
  • Enables management of this new root-volume-only AMI creation within the existing single backup policy definition.

2 details in Everything

6 more releases in this issue · 2024-01-06 → 2024-01-29
Archived Release Notes - Microsoft 365 - 2024: January 27, 2024 Stable

Druva adds GA Planner backup and Federated Search RBACRBACRole-based access control, where permissions are assigned to roles such as reader or administrator and users receive those roles. It makes access easier to manage than individual permission lists. enhancements for legal admins

  • Adds Generally Available support for backing up Microsoft Planner task-tracking data within the Microsoft 365 app.
  • Enhances Data Governance Federated Search to allow legal administrators to search and view data of non-legal-hold users via new File Search and Email Search options.

2 details in Everything

Archived Release Notes - Google Workspace 2025: January 25, 2024 Stable

Druva enhances Google Workspace calendar restore options with granular recovery.

Archived Release Notes - Salesforce (2024 - 2025): January 20, 2024 Stable

Adds manual Full or Incremental backup selection for Salesforce data protection.

  • Allows users to select Full or Incremental backup type when manually triggering a backup in the Druva Salesforce integration.

1 detail in Everything

Enterprise Workloads Release Notes / Archived Release Notes and fixed issues 2024: January 15, 2024 Stable

Adds List all snapshots API endpoint and deprecates Smart Scan in NAS workloads.

  • Adds a new List all snapshots API endpoint to list all snapshots for a specific backup set
  • Deprecates the Smart Scan feature for NAS workloads, reverting to the existing Advanced Smart Scan mechanism

2 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The Cancel a job and On-demand backup NAS APIs are temporarily removed until updated versions are published in an upcoming release.
  • !The Smart Scan feature for NAS workloads is discontinued; users must upgrade the agent to version 6.3.1 or later.
Archived Release Notes - inSync GovCloud: January 11, 2024 Stable

inSync Client v5.9.5 adds support for RHELRHELRed Hat Enterprise Linux, a commercially supported Linux distribution maintained by Red Hat, chosen by cyber tools for its long support lifecycle, certified hardware compatibility, and enterprise deployment prevalence. 9.3 endpoint data protection

Archived Release Notes - Salesforce (2024 - 2025): January 06, 2024 Stable

Druva Salesforce adds environment association visual cues, user sharing for environments, and full sandbox protection without license impact

  • Adds icons in the Environment Hub to show at a glance which environments are linked to data templates, backups, archives, and licenses

1 detail in Everything

Was this useful?

Veeam Kasten

6.5.3 2 releases · 2024-01-12 → 2024-01-26 Stable

Veeam Kasten is a Kubernetes-native platform for backing up, restoring, and migrating containerized applications and their persistent data.

Kasten K10 6.5.3 adds Azure Immutability protection and a Filter Resources option in the Multiple Applications Restore form.

└──▷ TRY IT
Preserve the previous gateway port (8000) when upgrading K10 via Helm so that existing integrations or firewall rules are not broken.
$ helm upgrade k10 kasten/k10 --namespace kasten-io --set gateway.service.externalPort=8000
Restore only a subset of resources across multiple applications after a failure, using the new Filter Resources option in the restore UI.
📍In the K10 dashboard, open the Restore view, select Multiple Applications, then use the Filter Resources option to include only the resource types you want to restore before confirming.
  • Adds Filter Resources option in the Multiple Applications Restore form to narrow which resources are restored.
  • Adds Azure Immutability protection for backup locations.

2 details in Everything

└──▷ BREAKING ON UPGRADE
  • !The gateway service port has changed from 8000 to 80; set gateway.service.externalPort to 8000 to restore the previous behavior.
  • !The K10 Operator no longer supports downloading PDF reports; setting reporting.pdfReports to true for a K10 Operand install or upgrade will now result in an error.
1 more release in this issue · 2024-01-12 → 2024-01-26
6.5.2 Stable

Kasten K10 6.5.2 adds CephFS CSICSIAn ambiguous acronym spanning Container Storage Interface, Crime Scene Investigation, and other expansions — without more context about which domain this tool operates in, a reliable definition cannot be given. snapshot mounts, SELinuxSELinuxA mandatory access control system built into the Linux kernel, maintained by the NSA and Red Hat, that enforces fine-grained policies restricting what processes can access, even if they run as root. context preservation, and Kubernetes 1.28 support

└──▷ TRY IT
Disable forced root security context for Kanister Execution Hooks when your policy requires non-root hook execution.
$ helm upgrade k10 kasten/k10 --namespace kasten-io --set forceRootInKanisterHooks=false
  • Adds forceRootInKanisterHooks Helm flag to configure the security context of Kanister Execution Hooks (defaults to true).
  • Adds support for CephFS CSI Snapshots as shallow read-only volumes.
  • Adds the ability to perform a read-only mount of a CephFS CSI snapshot into the Kanister Pod during the Export phase.
  • Adds the ability to preserve the SELinuxLevel of Pods and Deployments for the Kanister Pod during the Export phase on OpenShift clusters.
  • Adds the ability to delete storage repository API resources.

5 details in Everything

└──▷ BREAKING ON UPGRADE
  • !K10 support for native Ceph provisioning has been removed; applications using native Ceph provisioning will stop having snapshots and exports work after upgrading to K10 6.5.2 — switch to CSI-based Ceph provisioning before upgrading.
  • !Snapshots of applications using native Ceph provisioning MUST be exported before upgrading to K10 6.5.2 or those snapshots will be lost.
  • !The categories field has been removed from vSphere profiles; vSphere tags are no longer used for tracking K10 snapshots.
Was this useful?

Velero

v1.13.0

Velero is an open-source tool that backs up, restores, and migrates Kubernetes cluster resources and persistent volumes.

Velero v1.13 adds JSON Merge/Strategic Merge Patch for resource modifiers, node-agent concurrency controls, sparse file restore, and hook execution status.

└──▷ GET THIS VERSION
$ git clone --branch v1.13.0 https://github.com/velero-io/velero.git
# already have the repo? check out this version:
$ git checkout v1.13.0
└──▷ TRY IT
Skip the first scheduled run immediately after creating a schedule, useful when you want the next window — not now — to be the first execution.
$ velero schedule create my-daily-backup --schedule='@daily' --include-namespaces my-app --skip-immediately
Disable the new informer cache if Velero pods hit OOMOOMAn out-of-memory condition: a program requests more memory than the system or device can provide. The allocation fails or the operating system may stop the process. after upgrading to v1.13, trading restore performance for lower memory consumption.
$ velero install --disable-informer-cache
  • Adds --skip-immediately flag to velero schedule commands and --schedule-skip-immediately to the server and install commands to control immediate schedule skip behavior.
  • Adds --disable-informer-cache option to the Velero install command to control the new informer cache (enabled by default in v1.13) that improves restore performance.
  • Adds loadConcurrency config to node-agent to set how many data movement activities (fs-backups, CSICSIAn ambiguous acronym spanning Container Storage Interface, Crime Scene Investigation, and other expansions — without more context about which domain this tool operates in, a reliable definition cannot be given. snapshot data movements) run per node globally or per-node.
  • Adds HooksAttempted and HooksFailed fields to backup/restore CR status and velero backup/restore describe output to show hook execution details.
  • Adds a VolumeInfo metadata file to the backup repository's backup name sub-directory, capturing PVC/PV backing method, snapshot info, and status for downstream use.
+6 more show less
  • Extends velero backup describe with a Backup Volumes section covering native snapshot, fs-backup, CSI snapshot, and CSI snapshot data movement, including CSI data movement info not available in v1.12.
  • Adds JSON Merge Patch and Strategic Merge Patch support to Resource Modifiers (ConfigMap-based restore rules), supplementing the existing JSON Patch method.
  • Adds configurable parallel files upload options for Kopia-based fs-backups and CSI snapshot data movements to increase backup speed.
  • Adds support for writing sparse files during fs-restore and CSI snapshot data movement restores.
  • Adds Azure AD/Workload Identity support for Kopia operations (file system backup, data mover, etc.).
  • Bumps AWS SDK for Go to version 2, delivering significant CPUCPUThe main general-purpose processor in a computer. It runs application instructions and coordinates work with memory and other hardware. and memory performance improvements over version 1.

11 details in Everything

└──▷ BREAKING ON UPGRADE
  • !velero backup describe output: existing information for native snapshot, CSI snapshot, and fs-backup has been moved to the new Backup Volumes section with format changes.
  • !The DataMoverConfig field in DataUploadSpec changed from *map[string][string] to map[string]string; code or tools referencing this API type must be updated.
  • !velero install now enables the informer cache by default (previously disabled by default); pass --disable-informer-cache to restore the previous behavior, or increase the Velero pod memory limit to avoid OOM errors.
Was this useful?
◆  Data Security & DLP

Ubiq Security

January 2024

Ubiq Security January 2024: Java/Node client libraries add metadata support and billing granularity control

  • Adds ability to attach customer metadata to event reporting in the Java Client Library for custom metrics tracking.
  • Adds ability to attach metadata to usage/billing records in Node.JS Client Library.

2 details in Everything

Was this useful?

Netskope

Netskope Release Notes Hotfix Version 111.1.0

Netskope 111.1.0 adds HTTPSHTTPSHTTP carried over an encrypted TLS connection. It protects traffic in transit and lets a browser verify the server's certificate. auto-detection on non-standard ports and a flag to disable Firefox restart prompts

  • Adds HTTPS traffic auto detection on non-standard ports so the firewall can identify HTTP(s) traffic without specifying custom ports in steering configuration.
  • Adds the disableFirefoxPopup feature flag to allow users to disable the NS Client Firefox browser restart UI pop up.

2 details in Everything

Was this useful?

SandboxAQ AQtive Guard

24.01.2 3 releases · 2024-01-11 → 2024-01-24 Stable

Adds client_ip and forwarded_for_client_ip fields to audit logs for source IP visibility

  • Adds client_ip and forwarded_for_client_ip fields to audit log entries, recording the client's IP address and original proxy IP respectively
  • Improves UI accessibility in the project dashboard and project/slots views

2 details in Everything

2 more releases in this issue · 2024-01-11 → 2024-01-24
24.01.1 Stable

AQtive Guard 24.01.1 adds server-side docs, GraphQL severities filter, and .sst detection.

└──▷ TRY IT
Query vulnerabilities filtered by severity via GraphQL.
$ curl -X POST http://hostname/graphql -H 'Content-Type: application/json' -d '{"query": "{ organization { vulnerabilities(severities: [\"critical\"]) { id title } } }"}'
  • Ships General AQtive Guard documentation with the software at http://hostname/docs
  • Adds the severities filter to the Organization.vulnerabilities GraphQL field
  • Enables the host-scanner to detect .sst files (Serialized Certificate Store files)

3 details in Everything

24.01.0 Stable

Adds Project-level Jira configuration via GraphQL API

  • GraphQL endpoint now supports configuring Jira at the Project level.
  • The cipherSuite filter in Handshakes shows only selected ciphersuites.

2 details in Everything

Was this useful?

bytebase

2.13.1

Bytebase 2.13.1 adds DML pre-backup for MySQL, instance connection limits, data compression/encryption, and renamed API roles.

└──▷ GET THIS VERSION
$ git clone --branch 2.13.1 https://github.com/bytebase/bytebase.git
# already have the repo? check out this version:
$ git checkout 2.13.1
  • Enables compression and encryption for exported data via API settings
  • Allows editing database indexes directly in the Schema Editor UI

2 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Bytebase API predefined roles have been renamed: Workspace level OWNER->workspaceAdmin, DBA->workspaceDBA, DEVELOPER->workspaceMember; Project level OWNER->projectOwner, DEVELOPER->projectDeveloper, QUERIER->projectQuerier, EXPORTER->projectExporter, VIEWER->projectViewer, RELEASER->projectReleaser
Was this useful?
◆  Non-Human & Agent Identity

Aembit

Access Authorization Events and Google Cloud Run Jobs support now available 2 releases · 2024-01-04 → 2024-01-16 Stable

Adds Access Authorization Events observability and Google Cloud RunCloud RunGoogle's managed container runtime that executes stateless workloads on demand, scaling to zero when idle, so tools can deploy without managing servers or paying for idle capacity. Jobs client workload support

  • Enables Access Authorization Events to observe credential requests
  • Supports Google Cloud Run Jobs as Client Workloads with Attestation-based identity

2 details in Everything

1 more release in this issue · 2024-01-04 → 2024-01-16
Agent Controller high availability now supported Stable

Aembit Agent Controller now supports high availability configurations for continuous access management.

  • Enables high-availability Agent Controller installations for Agent Proxy registration and credential acquisition.

1 detail in Everything

Was this useful?
◆  Secure Access (VPN / SASE / ZTNA)

Zscaler

Private Access (ZPA) — Release Upgrade Summary (2024) — 2024-01-31 16 releases · 2024-01-10 → 2024-01-31 Stable

ZPA adds server-side certificate posture validation and cross-edge client-to-client connectivity enhancements.

  • Adds server-side certificate posture validation as a configurable feature in Device Posture Profiles
  • Enhances client-to-client connectivity to succeed across different Private Service Edges or Public Service Edges without a dedicated application segment

2 details in Everything

15 more releases in this issue · 2024-01-10 → 2024-01-31
Private Access (ZPA) — ZPA Private Service Edge Release Summary (2024) — 2024-01-31 Stable

ZPA Private Service Edge 24.14.2 adds server-side certificate posture validation and fixes cross-edge client-to-client connectivity.

  • Ensures client-to-client connectivity across different ZPA Private or Public Service Edges without a dedicated segment

1 detail in Everything

Private Access (ZPA) — Release Upgrade Summary (2024) — 2024-01-30 Stable

New Privileged Remote Access (PRA) capabilities including VNCVNCA remote desktop protocol that transmits screen framebuffer updates over a network and relays keyboard and mouse input back, letting cyber tools observe or control a graphical session on a remote machine. session recording and clipboard integration

  • Adds support for File Transfer with VNC for Privileged Remote Access sessions
  • Enables Clipboard access and Session Proctoring for Privileged Remote Access
  • Introduces Allocated credentials and Time-bound access controls for Privileged Remote Access
  • Removes concurrency restrictions for Privileged Remote Access users

4 details in Everything

Internet & SaaS (ZIA) — Release Upgrade Summary (2024) — 2024-01-26 Stable

ZIA adds Domain Profiles in Inline DLPDLPData Loss Prevention: a category of controls that inspect and block sensitive data from leaving an organisation via email, web, or removable media, giving cyber tools a policy enforcement layer over data in motion and at rest., new PIIPIIPersonally Identifiable Information — data that can identify a specific individual, such as names, email addresses, or SSNs. Cyber tools flag or redact it to limit exposure and meet privacy regulations. dictionaries, File Type Control for archives, and IP surrogacy for non-cookie auth.

  • Adds includedDomainProfiles and excludedDomainProfiles optional fields to /webDlpRules API endpoints to control email recipient domain profiles in inline DLP rules
  • Enables selection of up to 8 email recipient domain profiles within DLP policy rule criteria for Gmail and Outlook with and without content inspection
  • Adds predefined DLP detection for hierarchical PII dictionaries: IBAN (47 countries) and Passport Number (Asia, 8 countries)
  • Adds predefined DLP numeric PII dictionaries: CNPJ Number (Brazil), Mexico Unique Population Registration Code, National Economic Registry Number (Poland), Personal Identification Number (Croatia), Tax Identification Number (Luxembourg), and Unique Master Citizen Number
  • Extends File Type Control policy Archive category with new file types: .alz, .b64, .bh, .dact, .lrzip, .lz4, .lzip, .lzma, .lzop, .rzip, .zpaq, and .zst
+1 more show less
  • Supports IP surrogacy from known browsers for non-cookie authentication methods (KerberosKerberosA network authentication protocol that uses tickets issued by a trusted service. Users and services can prove their identities without sending a password to each application., digest, basic) via new Supported Authentication Methods field in location configuration

6 details in Everything

Internet & SaaS (ZIA) — Release Upgrade Summary (2024) — 2024-01-19 Stable

ZIA adds non-cookie IP surrogacy, new file types for control policies, and updated DPIDPIDeep Packet Inspection: a network analysis technique that examines packet payloads beyond headers, letting cyber tools classify traffic, detect patterns, or extract content at wire speed. app detection.

  • Supported Authentication Methods field available when configuring locations to enable IP surrogacy for known browsers with KerberosKerberosA network authentication protocol that uses tickets issued by a trusted service. Users and services can prove their identities without sending a password to each application., digest, or basic authentication
  • File Type Control policy supports ALZ (.alz), B64 (.b64), BH (.bh), DACT (.dact), LRZIP (.lrzip), LZ4 (.lz4), LZIP (.lzip), LZMA (.lzma), LZOP (.lzop), RZIP (.rzip), ZPAQ (.zpaq), and ZST (.zst) archive file types

2 details in Everything

Private Access (ZPA) — Release Upgrade Summary (2024) — 2024-01-19 Stable

ZPA adds Source IP Anchoring dashboard to monitor usage and metrics

Workflow Automation — Release Upgrade Summary (2024) — 2024-01-18 Stable

Workflow Automation adds DLPDLPData Loss Prevention: a category of controls that inspect and block sensitive data from leaving an organisation via email, web, or removable media, giving cyber tools a policy enforcement layer over data in motion and at rest. incident deletion API, analytics dashboard, multi-language template support, and new incident filters.

  • Adds DELETE /dlp/v1/incidents/{dlpIncidentId} endpoint to remove DLP incidents by ID
  • Adds Incident Analytics page in Admin Portal for high-level DLP visibility
  • Adds Add Template option, Template Family and Language filters, Template Family column, and Translate action for notification/survey templates
  • Adds File Name and File Type filters to the Incidents page
  • Adds Language drop-downs in Notify User/Escalate windows on Incident Details and Notification Channel field on Workflows

5 details in Everything

Private Access (ZPA) — Release Upgrade Summary (2024) — 2024-01-17 Stable

ZPA adds App Connector and Private Service Edge support for KVMKVMA Linux kernel module that turns the kernel into a hypervisor, letting a process run fully isolated virtual machines using hardware virtualisation extensions. Cyber tools use it to sandbox execution environments at near-native speed./qcow2 images.

  • New App Connector images are available in the KVM qcow2 format to support Equinix Network Edge.
  • New ZPA Private Service Edge images are available in the KVM qcow2 format to support Equinix Network Edge.

2 details in Everything

Private Access (ZPA) — Release Upgrade Summary (2024) — 2024-01-16 Stable

ZPA adds Redirection Policy rules and API support for bulk updating policy rule order.

  • Adds Redirection Policy rules to prefer ZPA Private Service Edges over Public Service Edges based on country code, client type, or geographical proximity
  • Adds cloud service API capability to bulk update the order of all rules within a policy set

2 details in Everything

Cloud & Branch Connector — Release Upgrade Summary (2024) — 2024-01-16 Stable

New AWS tagging support in security policies and VDIVDIVirtual Desktop Infrastructure: a model where desktop operating systems run as VMs on a central server and stream to thin clients, giving cyber tools a single managed environment to monitor or scan. Agent capability.

  • Adds support for applying security policies by leveraging AWS user-defined tags and attributes for workloads
  • Introduces the Zscaler VDI Agent, a lightweight Windows application that runs in the VDI session user space to authenticate multiple users and exchange user context

2 details in Everything

Internet & SaaS (ZIA) — Release Upgrade Summary (2024) — 2024-01-12 Stable

ZIA adds new Admin settings for block/connect SNISNIA TLS extension that lets a client declare which hostname it is connecting to during the handshake, allowing one server to host multiple certificates on a single IP address. mismatch and non-cookie IP surrogacy support

  • Adds Block CONNECT Host and SNI Mismatch option to Advanced Settings to block forward proxy connections where the CONNECT host doesn't match the SSLSSLA cryptographic protocol for encrypting network connections, now deprecated in favor of TLS but whose name persists colloquially. Cyber tools reference it when handling HTTPS or other encrypted-channel inspection and termination./TLS client hello SNI
  • Adds Prefer SNI over CONNECT Host for DNS Resolution option to Advanced Settings to use the SSL/TLS client hello SNI for DNS resolution instead of the CONNECT host
  • Enables IP surrogacy from known browsers for non-cookie authentication methods (KerberosKerberosA network authentication protocol that uses tickets issued by a trusted service. Users and services can prove their identities without sending a password to each application., digest, basic) via a new Supported Authentication Methods field when configuring locations
  • Expands File Type Control policy to include 13 new archive file types: .alz, .b64, .bh, .dact, .lrzip, .lz4, .lzip, .lzma, .lzop, .rzip, .zpaq, and .zst

4 details in Everything

Digital Experience Monitoring (ZDX) — Release Upgrade Summary (2024) — 2024-01-12 Stable

ZDX adds automatic root-cause analysis for poor scores and probe-configurable reverse Cloud Path

  • Adds preselected application tile and automated root-cause analysis on the User Details page when a Poor ZDX Score is present
  • Adds Reverse Cloud Path option in Probe configuration to bypass network devices blocking forward traffic

2 details in Everything

Client Connector — Client Connector App Release Summary (2024) — 2024-01-12 Stable

Client Connector 1.14 adds Android 14 support, ZIA/ZPA disaster recovery, and new log export fields.

  • Supports Android OS 14
  • Supports Disaster Recovery for Zscaler Internet Access (ZIA) and Zscaler Private Access (ZPA)
  • Saves device properties from /system/bin/getprop in logs

3 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Removes the Knox Admin and all Knox functionality from Zscaler Client Connector
Private Access (ZPA) — Release Upgrade Summary (2024) — 2024-01-11 Stable

ZPA Isolation file upload/download limit raised to 1GB (2GB for multi-file) and connector pages now show last known IP addresses

  • Isolation file download and upload size limit increased to 1 GB per file (2 GB for multiple files)
  • App Connectors and Private Service Edges tables add Last Known Public IP and Last Known Private IP fields on disconnect

2 details in Everything

Risk360 — Release Upgrade Summary (2024) — 2024-01-11 Stable

Risk360 adds CrowdStrike integration for risk factor visibility

Business Insights — Release Upgrade Summary (2024) — 2024-01-10 Stable

Zscaler Business Insights launches with SaaSSaaSSoftware delivered over the internet and billed by subscription, hosted and operated by the vendor so the buyer skips installation and infrastructure management. usage/spending visibility and workplace utilization metrics.

  • Adds Business Insights service providing 360-degree visibility into SaaS application usage and spending.

1 detail in Everything

Was this useful?

tailscale

v1.58.0

Tailscale creates private WireGuard-based mesh networks with centralized identity and access controls.

Tailscale v1.58.0 adds Kubernetes Connector CRDCRDA Kubernetes extension that adds a new object type to the cluster, so a tool's configuration is stored, validated and versioned by Kubernetes itself rather than in a file beside it., macOS DNS view, and --webclient flag

└──▷ GET THIS VERSION
$ git clone --branch v1.58.0 https://github.com/tailscale/tailscale.git
# already have the repo? check out this version:
$ git checkout v1.58.0
└──▷ USE IT
Deploy a subnet router using the new Kubernetes Connector resource.
yaml
---
apiVersion: tailscale.com/v1
kind: Connector
metadata:
  name: my-subnet-router
spec:
  # ... Connector spec ...
Enable the web client via CLI on supported platforms.
shell
tailscale set --webclient=true
  • Adds Connector Custom Resource to deploy subnet routers and exit nodes via the Kubernetes Operator
  • Adds Tailscale IngressClass resource for controlled ingress routing in Kubernetes
  • Syncs operator-managed labels to StatefulSet Pods automatically
  • Displays a new DNS Settings view in the macOS app showing configuration during runtime
  • Adds Option-click Quit (Leave VPN Active) option to quit the macOS app while keeping the tunnel active
+1 more show less
  • Supports KeyExpirationNotice system policy on macOS and iOS to customize key expiration notifications

6 details in Everything

Was this useful?

vopono

0.10.8

vopono 0.10.8 adds PrivateInternetAccess port forwarding and --create-netns-only flag.

└──▷ GET THIS VERSION
$ git clone --branch 0.10.8 https://github.com/jamesmcm/vopono.git
# already have the repo? check out this version:
$ git checkout 0.10.8
└──▷ USE IT
Create an isolated network namespace for tools like firejail to attach to, without establishing the VPNVPNA virtual private network, an encrypted tunnel between devices or networks. It carries traffic across another network as though the endpoints had a private connection. tunnel.
shell
vopono --create-netns-only
  • Adds --create-netns-only CLI argument to create the network namespace without starting VPN traffic
  • Adds PrivateInternetAccess port forwarding support

2 details in Everything

Was this useful?

Twingate

Kubernetes Operator v0.2.0

Twingate Kubernetes Operator v0.2.0 now deploys Connectors and manages their updates automatically.

  • Adds ability to deploy Twingate Connectors via the Kubernetes Operator in version v0.2.0.
  • Enables automatic update management for deployed Connectors within the Kubernetes cluster.

2 details in Everything

Was this useful?
◆  Privileged Access Management

Teleport

v14.3.3 3 releases · 2024-01-11 → 2024-01-12 Stable

Teleport v14.3.3 adds Kubernetes app annotation controls and client IP in audit logs

└──▷ GET THIS VERSION
$ git clone --branch v14.3.3 https://github.com/gravitational/teleport.git
# already have the repo? check out this version:
$ git checkout v14.3.3
  • Adds k8s.app.disableServiceImport annotation to control Service imports for Kubernetes apps
  • Adds k8s.app.tlsSkipVerify annotation to disable TLS certificate verification for Kubernetes apps
  • Includes client remote IP address in administrative audit events

3 details in Everything

2 more releases in this issue · 2024-01-11 → 2024-01-12
v14.3.1 Stable

Adds tsh database role selection, callback login, future assume time, and machine ID certificate extensions.

└──▷ GET THIS VERSION
$ git clone --branch v14.3.1 https://github.com/gravitational/teleport.git
# already have the repo? check out this version:
$ git checkout v14.3.1
└──▷ TRY IT
Login with a callback URL for automation
$ tsh login --callback=http://localhost:8080/callback
Prevent the kube-agent-updater from failing if it cannot resolve an image tag
$ teleport-kube-agent-updater --insecure-no-resolve-image
  • Added --callback flag to tsh login for automated session callbacks
  • Added --insecure-no-resolve-image flag to teleport-kube-agent-updater to disable image tag resolution on pull failure
  • Added future assume time capability to access requests, allowing delayed privilege escalationprivilege escalationGaining permissions beyond those an account or process initially had. It can turn limited access into administrator control or access to another user's resources.
  • Added new certificate extensions and usage reporting flags to identify Machine ID bots and their cluster activity
  • Adds Database Roles column to tsh db ls -v output
+2 more show less
  • Added support to select database roles from tsh during connection
  • Resources named . and .. are now forbidden in Teleport resources

7 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Resources named . or .. are no longer allowed; rename any existing resources with these names before upgrading.
v13.4.15 Stable

Teleport v13.4.15 adds role/trait grants for access list owners, Machine ID cert extensions, and agent updater flags.

└──▷ GET THIS VERSION
$ git clone --branch v13.4.15 https://github.com/gravitational/teleport.git
# already have the repo? check out this version:
$ git checkout v13.4.15
└──▷ USE IT
Prevent agent updates from failing when image pulling is blocked by disabling tag resolution.
shell
teleport-kube-agent-updater --insecure-no-resolve-image
  • access lists now support granting roles and traits to owners
  • Added new certificate extensions and usage reporting flags to explicitly identify Machine ID bots and their cluster activity
  • Support running a version server in the proxy for automatic agent upgrades
  • Added the --insecure-no-resolve-image flag to the teleport-kube-agent-updater

4 details in Everything

└──▷ BREAKING ON UPGRADE
  • !Resources named . and .. are no longer allowed. Please review the resources in your Teleport instance and rename any resources with these names before upgrading.
Was this useful?
Governance, Risk & Compliance
◆  Compliance Automation & Trust Management

Scrut Automation

Status of Inactive Resources 16 releases · 2024-01-01 → 2024-01-17 Stable

Scrut adds visual indicators for inactive cloud resources in Tests and By Resources views

  • Fades out inactive resources in the Tests section to indicate an account may be inactive
  • Fades out inactive resources on the By Resources page with an indicator message

2 details in Everything

15 more releases in this issue · 2024-01-01 → 2024-01-17
Edit and Delete Risk Mitigation Task Stable

New UI actions for editing, deleting, and auditing Mitigation Tasks with a new status workflow

  • Adds an Action column to the Mitigation Task table that enables deletion of tasks directly from the UI
  • Adds ability to edit Mitigation Task names and descriptions via the Mitigation Task Page
  • Adds an Audit Log to capture and track changes made to Mitigation Tasks
  • Redefines Mitigation Task status categories to Not Due, Due, and Closed based on assigned dates and approval

4 details in Everything

Creating Corrective Action from Audit Finding Stable

Scrut now allows creating Corrective Actions directly from Audit Findings via the UI.

  • Adds creation of Corrective Actions linked to Audit Findings from the Actions menu or finding details; all linked corrective actions must close before the finding can close.
  • Introduces Source Name and Source Type columns in the Corrective Action Tracker, with Source Name linking back to the associated audit.

2 details in Everything

Active employee calculation and Employee type filters Stable

Adds Employee type filter UI option for Active and Ex-Employee statuses

  • Adds an Employee type filter in the portal UI with Active employees and Ex-Employees options to control visibility based on offboarding status.
  • Enhances the backend logic for Active Employee calculations to exclude users marked as NOT A PERSON or OFFBOARDING COMPLETED, and include those with OFFBOARDING NEEDED status and a future exit date.

2 details in Everything

Introducing Risk ID in Risk Register Stable

Adds Risk ID with configurable prefix and search to Scrut Risk Register UI

  • Adds a Risk ID toggle in Configuration > Risk Settings, disabled by default; enabling it generates identifiers for existing and new risks.
  • Supports user-defined alpha-numeric prefix (max 6 chars) for Risk IDs, once set immutable
  • When Risk ID is enabled, displays it as the first Risk Register column and supports searching by ID.
  • When enabled, displays Risk ID at the top of Risk Details alongside Risk Name; with the toggle off, the previous layouts remain unchanged.

4 details in Everything

GCP Integration using service account impersonation Stable

Adds GCP integration through service-account impersonation, recommended over the earlier JSON-file method because credentials are short-lived.

  • Adds new UI navigation to integrate GCP accounts using service account impersonation under Settings > Integrations > Cloud Provider
  • Enables automatic scanning for misconfigurations every 24 hours across integrated GCP accounts, with results displayed in the Test section of the Scrut platform
  • Introduces a recommended integration method over the previous JSON file mechanism to enhance security through short-lived credentials

3 details in Everything

Introducing Policy Multi-level Approval Workflow Stable

Scrut now supports multi-level policy approval workflows with configurable approver chains and progress tracking.

  • Adds a sequential chain of up to five policy approvers; every designated approver must approve before publication, and renewal repeats the workflow.
  • Adds a Policy Approval toggle under Settings > Workflows to activate multi-level approval workflows
  • Adds a Progress Bar on the Policy detail page to visualize approval status and identify the next approver in line

3 details in Everything

└──▷ BREAKING ON UPGRADE
  • !When the Policy Workflow is OFF, the Approver field from the policy is removed; values can be retrieved by turning the toggle ON for Policy Approval Workflow.
ADP Integration Stable

New ADP integration fetches employee details via Settings > Integrations

  • Adds ADP WorkForceNow integration to sync Employee Name, email, department, reporting manager, joining date, and exit date
  • New Integrate button in Settings > Integrations for ADP connection setup

2 details in Everything

Reset MDM Integration and Delete employee’s system details in the "Technicals" t Stable

Reset integration and delete Technicals data in Scrut Automation

  • Adds option to 'Reset Integration + Remove Technicals data like HD encrypted, etc.' when disconnecting MDMMDMMobile device management, centrally configuring and managing enrolled devices. Administrators use it to apply settings, distribute applications and enforce device security policies. integrations via the UI

1 detail in Everything

CMMC 2.0 Level 1 Framework Stable

Adds CMMC 2.0 Level 1 framework support for self-assessment and compliance monitoring.

Ticket link & Ticket created filter in Tests module→ By Rules section Stable

Adds ticket links and a Ticket created filter to Tests > By Rules.

  • Displays Ticket Link in the Tickets field of the Tests → By Rules table for findings with associated tickets.
  • Adds Ticket created filter (Yes/No) to the Tests → By Rules section.

2 details in Everything

Evidence Dashboard Stable

Scrut adds Evidence Dashboard to visualize evidence metrics by department, assignee, and framework.

  • Adds an Evidence Dashboard excluding Not Relevant evidence from all metrics and graphs; draft counts appear only when Evidence Approval Workflow is enabled.
  • Adds an Evidence by Department bar chart with drill-down to pre-filtered All Evidence views.
  • Adds an Evidence by Assignee bar chart with drill-down to pre-filtered All Evidence views.
  • Adds an Evidence by Framework bar chart with drill-down to pre-filtered All Evidence views.
  • Adds an Upcoming Evidence for Review section showing overdue counts and a 4-month projection.

5 details in Everything

Vendor Custom Fields Stable

Adds Vendor Custom Fields for tailoring vendor profiles beyond default data

  • Enables users to define and capture additional custom fields in vendor profiles via the Vendor Management module Settings.
  • Allows bulk import of custom field values by appending them starting from Column H in the Import Vendors template.

2 details in Everything

Vendor Overview Stable

Adds a Vendor Overview tab with risk scores and questionnaire-status charts for each vendor.

  • Adds a Vendor Overview tab within the Vendors Management module to view risk scores and questionnaire status.
  • Introduces a Risk Score by Domain bar graph for breakdown of vendor risk areas.
  • Adds a Questionnaire Status Donut Chart showing Created, Sent, Submitted, Accepted, and Overdue states.
  • Adds a Mitigation Task Status donut chart tracking open and closed tasks.

4 details in Everything

Duration filter and Access Requests Granted term change in Trust Vault Stable

Adds Duration filter to Trust Vault tabs and renames Active Access Request to Access Requests Granted

  • Adds a Duration filter to the Trust Vault module to refine search results by time range (last 7 days to last 1 year).
  • Renames the tab label from Active Access Request to Access Requests Granted in the Trust Vault interface.

2 details in Everything

Jira Integration Now Includes Future Sprints Stable

Scrut Jira integration now lists future sprints in the task creation dropdown.

  • Adds future sprints to the Jira sprint dropdown when creating compliance tasks

1 detail in Everything

Was this useful?

Drata

Week of January 22nd 3 releases · 2024-01-08 → 2024-01-29 Stable

Drata adds Google Drive and closed Jira ticket uploads to Evidence Library with bulk HRISHRISHuman Resources Information System — software that centralises employee records, payroll, and org data. Cyber tools integrate with it to tie identities and access rights to authoritative HR records. sync

  • Adds direct file upload from Google Drive to the Evidence Library.
  • Adds support for uploading closed Jira tickets (with attachments) to Evidence Library, now included in the Audit Hub package as both link and file.
  • Enables bulk re-synchronization of HRIS and IdPIdPA service that authenticates users and supplies identity information to other applications. It is the sign-in authority behind many single sign-on systems. connections directly from the personnel page.
  • Adds instant validation feedback for JQL queries entered in the Jira connection drawer.

4 details in Everything

2 more releases in this issue · 2024-01-08 → 2024-01-29
Week of January 15th Stable

Drata adds default restricted RBACRBACRole-based access control, where permissions are assigned to roles such as reader or administrator and users receive those roles. It makes access easier to manage than individual permission lists. views, per-workspace Trust Centers, DCF template rollback, and DocuSign integration.

  • RBAC: Restricted View turned on by default for control and risk managers to limit access to owned or mapped items.
  • DCF Library now supports reverting any control's template back to Drata's latest version via the Revert to Drata’s latest control template action.

2 details in Everything

Week of January 1st Stable

Drata adds international background check sync via Checkr and expanded CSV IdPIdPA service that authenticates users and supplies identity information to other applications. It is the sign-in authority behind many single sign-on systems. upload support.

  • Adds ability to synchronize International (including Canada) background checks from Checkr connection

1 detail in Everything

Was this useful?

TrustCloud

Capability to execute external test through TrustCloud API. 3 releases · 2024-01-09 → 2024-01-25 Stable

TrustCloud adds capability to execute external tests via its API.

  • Enables execution of external tests through the TrustCloud API.

1 detail in Everything

2 more releases in this issue · 2024-01-09 → 2024-01-25
Integration credentials are stored in AWS SSM Stable

TrustCloud 12.4: AWS SSMAWS SSMAWS Systems Manager, an Amazon service that lets operators manage EC2 instances and on-premises servers without opening inbound ports, replacing SSH with API-driven session and command execution. credential storage and auto-detected integration tiers

  • Auto-detects the tier for integrations instead of defaulting to the standard tier

1 detail in Everything

Released the support for Deel integration. Stable

TrustCloud adds a new Deel integration to automate Employees inventory.

Was this useful?
◆  Third-Party & Vendor Risk (TPRM)

Panorays

Q4’23

Panorays Q4'23 adds supplier archival status, internal Risk Insight notes, enriched Cyber News categorization, and API v2.0 enhancements.

  • Adds Archived status for third parties to stop assessments and preserve documents
  • Enables internal notes on Risk Insight events for team communication and rationale documentation
  • Enhances Cyber News with AI-based categorization and richer data sources
  • Updates API v2.0 with performance improvements and expanded capabilities for questionnaire templates, remediation data, and portfolio assignment

4 details in Everything

Was this useful?
Govern
◆  AI Runtime Defense & Guardrails

Superagent

v0.1.67 9 releases · 2024-01-02 → 2024-01-28 Stable

Adds default method and URL configuration to the HTTP tool

└──▷ GET THIS VERSION
$ git clone --branch v0.1.67 https://github.com/superagent-ai/superagent.git
# already have the repo? check out this version:
$ git checkout v0.1.67
8 more releases in this issue · 2024-01-02 → 2024-01-28
v0.1.65 Stable

Superagent v0.1.65 adds Replit code execution and AgentOps tracking integration

└──▷ GET THIS VERSION
$ git clone --branch v0.1.65 https://github.com/superagent-ai/superagent.git
# already have the repo? check out this version:
$ git checkout v0.1.65
  • Adds code_execution capability via Replit environment
  • Adds AgentOps agent tracking integration

2 details in Everything

v0.1.63 Stable

Superagent v0.1.63 adds streaming support for agent invoke responses

└──▷ GET THIS VERSION
$ git clone --branch v0.1.63 https://github.com/superagent-ai/superagent.git
# already have the repo? check out this version:
$ git checkout v0.1.63
└──▷ USE IT
Stream the output of an agent invocation in real time via the CLI.
shell
superagent invoke --agent-id <agent_id> --prompt "<query>" --stream
v0.1.59 Stable

Superagent v0.1.59 adds LLMLLMA large language model, a neural network trained on large amounts of text to recognize patterns and generate language. Applications use it for tasks such as answering, summarizing and writing code. parameter passing and segment tracking, excluding typo fix

└──▷ GET THIS VERSION
$ git clone --branch v0.1.59 https://github.com/superagent-ai/superagent.git
# already have the repo? check out this version:
$ git checkout v0.1.59
  • Passes LLM parameters to Agent invocation
  • Adds LLM model information to the segment tracker

2 details in Everything

v0.1.58 Stable

Adds HTTP status code to segment logs and agent response analytics

└──▷ GET THIS VERSION
$ git clone --branch v0.1.58 https://github.com/superagent-ai/superagent.git
# already have the repo? check out this version:
$ git checkout v0.1.58
  • Adds http_status field to segment logs for detailed request tracking
  • Adds analytics tracking data to agent responses for improved observability

2 details in Everything

v0.1.57 Stable

Adds Supabase Pgvector support on Superagent Cloud

└──▷ GET THIS VERSION
$ git clone --branch v0.1.57 https://github.com/superagent-ai/superagent.git
# already have the repo? check out this version:
$ git checkout v0.1.57
  • Adds Supabase Pgvector

1 detail in Everything

v0.1.56 Stable

Superagent v0.1.56 adds Langfuse stats fetching integration

└──▷ GET THIS VERSION
$ git clone --branch v0.1.56 https://github.com/superagent-ai/superagent.git
# already have the repo? check out this version:
$ git checkout v0.1.56
  • Adds the ability to fetch usage and tracing statistics from Langfuse

1 detail in Everything

v0.1.54 Stable

Adds UI to configure vector databasesvector databasesA database built to store embeddings and find the nearest ones to a query quickly. It is the retrieval half of most RAG systems. without code changes

└──▷ GET THIS VERSION
$ git clone --branch v0.1.54 https://github.com/superagent-ai/superagent.git
# already have the repo? check out this version:
$ git checkout v0.1.54
  • Enables Configuring Vector Databases using UI

1 detail in Everything

v0.1.52 Stable

Adds Azure OpenAI support in the Superagent UI

└──▷ GET THIS VERSION
$ git clone --branch v0.1.52 https://github.com/superagent-ai/superagent.git
# already have the repo? check out this version:
$ git checkout v0.1.52
└──▷ HOW TO FIND IT
Configure Superagent to use an Azure OpenAI deployment instead of a standard provider via the UI settings.
📍In the Superagent UI, navigate to Settings › Providers and select Azure OpenAI as the active model provider.
Was this useful?

Pangea

Product Updates - January 09, 2024

Pangea Vault adds quantum-safequantum-safeCryptography designed to stay secure against a large quantum computer, which could break today's RSA and elliptic-curve keys. NIST standardized the first algorithms in 2024 as ML-KEM, ML-DSA and SLH-DSA. signing algorithms, Encrypt-Structured API, and Intelligence bulk queries

  • Adds ED25519-DILITHIUM2-BETA, ED448-DILITHIUM3-BETA, and ten SPHINCSPLUS algorithms to Vault for quantum-safe cryptographic signing.

1 detail in Everything

Was this useful?

Rebuff

v0.1.1 2 releases · 2024-01-20 Stable

Rebuff detects and protects LLM applications against prompt injection attacks.

v0.1.1 introduces a new standalone Python SDK that runs checks natively without connecting to the Rebuff Playground API.

└──▷ GET THIS VERSION
$ git clone --branch v0.1.1 https://github.com/protectai/rebuff.git
# already have the repo? check out this version:
$ git checkout v0.1.1
  • Adds a standalone Python SDK package that executes checks locally in native Python instead of relying on the Rebuff Playground API

1 detail in Everything

1 more release in this issue · 2024-01-20
v0.0.6 Stable

Adds Python SDK entry point and Chroma vector databasevector databaseA database built to store embeddings and find the nearest ones to a query quickly. It is the retrieval half of most RAG systems. support

└──▷ GET THIS VERSION
$ git clone --branch v0.0.6 https://github.com/protectai/rebuff.git
# already have the repo? check out this version:
$ git checkout v0.0.6
  • Adds Python Rebuff SDK as a new library interface for cyber tooling
  • Adds Chroma support for vector db to the storage backend options
  • Adds server support for chroma to enable distributed vector operations

3 details in Everything

Was this useful?

NeMo Guardrails

v0.7.0

NeMo Guardrails v0.7.0 adds Llama Guard moderation, server-side threads, and RunnableRails LangChain integration

└──▷ GET THIS VERSION
$ git clone --branch v0.7.0 https://github.com/NVIDIA-NeMo/Guardrails.git
# already have the repo? check out this version:
$ git checkout v0.7.0
└──▷ USE IT
Integrate NeMo Guardrails directly into a LangChain RunnableSequence or LCEL pipeline using the new wrapper.
python
guardrail_chain = RunnableRails(config_path).with_config(run_name="nemo_guardrails")
  • RunnableRails class for improved LangChain integration allowing direct use within LangChain chains.
  • Support for server-side threads in the NeMo Guardrails library API.
  • Native support for Llama Guard input and output content moderation as a new guardrail type.

3 details in Everything

Was this useful?
◆  AI Red Teaming & Testing

Giskard

v2.7.0 5 releases · 2024-01-03 → 2024-01-29 Stable

Giskard tests and evaluates LLM applications for performance, bias, and security issues.

Giskard v2.7.0 adds LLMLLMA large language model, a neural network trained on large amounts of text to recognize patterns and generate language. Applications use it for tasks such as answering, summarizing and writing code.-as-judge ground truth tests and custom scanners

└──▷ GET THIS VERSION
$ git clone --branch v2.7.0 https://github.com/Giskard-AI/giskard-oss.git
# already have the repo? check out this version:
$ git checkout v2.7.0
  • Introduces the ability to define a custom scanner via the CustomScanner class

1 detail in Everything

4 more releases in this issue · 2024-01-03 → 2024-01-29
v2.6.0 Stable

Adds to_junit() method and improved __str__ for Dataset/Model in v2.6.0

└──▷ GET THIS VERSION
$ git clone --branch v2.6.0 https://github.com/Giskard-AI/giskard-oss.git
# already have the repo? check out this version:
$ git checkout v2.6.0
└──▷ USE IT
Export test results to JUnit XMLJUnit XMLA widely adopted test-report file format, originally from the Java JUnit framework, that records test suite results as XML; cyber tools emit it so their output plugs into CI systems like Jenkins or GitLab without custom parsers. for CI/CD integration or reporting tools.
code
junit_xml = result.to_junit()
  • Adds a to_junit method to TestSuiteResult to export reports in JUnit XML format
  • Updates Dataset.__str__ and Model.__str__ to display the object's name and ID instead of default representation

2 details in Everything

v2.5.3 Stable

Giskard v2.5.3 adds a method to create Dataset from TestDetails and includes ggshield in pre-commit.

└──▷ GET THIS VERSION
$ git clone --branch v2.5.3 https://github.com/Giskard-AI/giskard-oss.git
# already have the repo? check out this version:
$ git checkout v2.5.3
└──▷ USE IT
Convert existing test details into a usable Dataset object.
python
dataset = giskard.Dataset.from_test_details(test_results)
print(dataset)
  • Adds Dataset.from_test_details() method to construct datasets directly from test results
  • Adds ggshield to the project's pre-commit configuration for secret scanningsecret scanningChecking files, code or other data for exposed credentials such as passwords, API keys and tokens. Findings help teams remove the secret and revoke or rotate it.

2 details in Everything

v2.3.0 Stable

Giskard v2.3.0 allows cancelling Hub jobs and refactors ML worker code

└──▷ GET THIS VERSION
$ git clone --branch v2.3.0 https://github.com/Giskard-AI/giskard-oss.git
# already have the repo? check out this version:
$ git checkout v2.3.0
  • Adds the ability to cancel Hub jobs via API or UI (JIRA GSK-1943)

1 detail in Everything

v2.2.0 Stable

Giskard v2.2.0 adds speech-to-text typo transformation and refactors prompt injectionprompt injectionAn attack where text the model reads, such as a web page, file or tool result, carries instructions that override the user's. It is the main security risk for agents with tools. detection.

└──▷ GET THIS VERSION
$ git clone --branch v2.2.0 https://github.com/Giskard-AI/giskard-oss.git
# already have the repo? check out this version:
$ git checkout v2.2.0
  • Add speech-to-text typos transformation
  • Complete refactoring of prompt injection

2 details in Everything

Was this useful?

garak

v0.9.0.11

Garak scans language models and applications for vulnerabilities including prompt injection and data leakage.

Adds new probes for replay nudging, invisible text injection, DAN jailbreaks, and data leakage, plus an NVIDIA cloud functions generator.

└──▷ GET THIS VERSION
$ git clone --branch v0.9.0.11 https://github.com/NVIDIA/garak.git
# already have the repo? check out this version:
$ git checkout v0.9.0.11
  • Adds garak CLI entry point to invoke the tool directly
  • Adds NVIDIA cloud functions (NVCF) generator support
  • Adds probe for repetition-based nudging into replay/spurious generation
  • Adds probe for invisible text prompt injections
  • Adds probe for the DAN in the wild paper's library of jailbreak prompts
+1 more show less
  • Adds probe for NYT & The Guardian content in training data leakage

6 details in Everything

Was this useful?
◆  Model & Agent Protection

varmor

v0.5.5

Varmor v0.5.5 introduces BehaviorModeling mode and refines AppArmorAppArmorA Linux kernel security module, maintained as part of the kernel, that confines programs to a declared set of files, capabilities, and network access — letting cyber tools sandbox processes without writing custom kernel code./BPFBPFA Linux kernel virtual machine that lets programs attach small, sandboxed bytecode filters to kernel hooks — syscalls, network events, tracepoints — so cyber tools can observe or redirect kernel behaviour without writing a kernel module. enforcement

└──▷ GET THIS VERSION
$ git clone --branch v0.5.5 https://github.com/bytedance/varmor.git
# already have the repo? check out this version:
$ git checkout v0.5.5
  • Introduces BehaviorModeling mode to collect application behavior and generate models.

1 detail in Everything

Was this useful?
Platforms & Utilities
◆  General Utilities & Libraries

joplin

2.14.10 3 releases · 2024-01-06 → 2024-01-18 Stable

Adds automatic crash report uploading and improves error logging for resource downloads.

  • Adds support for automatically uploading crash reports

1 detail in Everything

2 more releases in this issue · 2024-01-06 → 2024-01-18
2.14.8 Stable

New ENEX directory import and Notesnook frontmatter support in v2.14.8

  • Allow importing a directory of ENEX files
  • Frontmatter importer supports Notesnook-style timestamps

2 details in Everything

2.14.6 Stable

Joplin v2.14.6 adds OCROCROptical character recognition, converting text in an image or scanned document into machine-readable characters. It lets software search or process text that was stored as pixels. support and Simple Backup as a default plugin with improved sync performance.

  • Adds support for OCR to extract text from images
  • Improves synchronisation by making delta call return whole items

2 details in Everything

Was this useful?

Syslifters SysReptor

2024.10 3 releases · 2024-01-08 → 2024-01-25 Stable

SysReptor 2024.10 adds note structure definition and notes export/import capabilities

└──▷ GET THIS VERSION
$ git clone --branch 2024.10 https://github.com/Syslifters/sysreptor.git
# already have the repo? check out this version:
$ git checkout 2024.10
  • defines initial note structure for projects in designs
  • allows exporting and importing notes

2 details in Everything

2 more releases in this issue · 2024-01-08 → 2024-01-25
2024.8 Stable

Adds diff-view for version history, readonly form fields, and improved template field UI.

└──▷ GET THIS VERSION
$ git clone --branch 2024.8 https://github.com/Syslifters/sysreptor.git
# already have the repo? check out this version:
$ git checkout 2024.8
  • Diff-view for version history is now available to compare changes between report versions
  • Form fields can be set readonly instead of disabled, allowing users to view but not edit specific data points without disabling the input entirely
  • Improved template field overview UI provides better visibility when designing complex reports

3 details in Everything

2024.1 Stable

SysReptor 2024.1 adds dark mode, new design/status/tags fields, and UI enhancements

└──▷ GET THIS VERSION
$ git clone --branch 2024.1 https://github.com/Syslifters/sysreptor.git
# already have the repo? check out this version:
$ git checkout 2024.1
  • dark mode enabled in the UI
  • Add status and tags fields to designs
  • Falls back to severity when CVSSCVSSCommon Vulnerability Scoring System, a method for describing a vulnerability's characteristics and severity. Its score is not the probability that attackers will exploit it. is undefined in template list

3 details in Everything

Was this useful?

PyPA python-pipx

1.4.2

The python-pipx CLI installs and runs Python applications in isolated environments while exposing their commands on the user's PATH.

python-pipx 1.4.2 adds --skip-maintenance and PEP 723PEP 723A Python Enhancement Proposal that standardizes embedding dependency metadata directly in single-file scripts, letting tools automatically resolve and install requirements without a separate config file. script support

  • Adds --skip-maintenance flag to the list command to allow skipping maintenance tasks during execution
  • Supports scripts using /// script header syntax without a run table, following updated PEP 723
  • Improves error message when provided --python version is not found

3 details in Everything

Was this useful?

GitHub CLI

v2.43.0 2 releases · 2024-01-16 → 2024-01-31 Stable

Adds --json export flags for gh variable list and release list; new URL output for repo creation

└──▷ GET THIS VERSION
$ git clone --branch v2.43.0 https://github.com/cli/cli.git
# already have the repo? check out this version:
$ git checkout v2.43.0
└──▷ USE IT
Export org variables as JSON for parsing in scripts or CI pipelines.
shell
gh variable list --org my-org --json name,setValue | jq -r '.[] | .name'
Export releases as JSON to find the latest tag automatically.
shell
gh release list --json tagName,createdAt | jq -r 'sort_by(.createdAt) | last.tagName'
Capture the URL of a newly created repo to open it or configure remotes immediately.
shell
gh repo create my-repo --clone && gh repo view my-repo --json url | jq -r .url
  • Adds --json flag to gh variable list to export variables in structured JSON format
  • Adds --json flag to gh release list to export releases in structured JSON format
  • Outputs the repository URL when creating a new repo via gh repo create

3 details in Everything

1 more release in this issue · 2024-01-16 → 2024-01-31
v2.42.1 Stable

Adds Webi as an installation option for GitHub CLI

└──▷ GET THIS VERSION
$ git clone --branch v2.42.1 https://github.com/cli/cli.git
# already have the repo? check out this version:
$ git checkout v2.42.1
└──▷ USE IT
Install the latest GitHub CLI release on your system using the Webi installer script.
shell
sh -ci "$(wget https://webi.sh/gh -O-)""
  • gh can now be installed via Webi (webi.installs) alongside existing methods.

1 detail in Everything

Was this useful?

kubernetes-helm

v3.14.0

Helm v3.14.0 adds --fail-on-no-result to helm search, --kube-version to lint, and supports RISC-V

└──▷ GET THIS VERSION
$ git clone --branch v3.14.0 https://github.com/helm/helm.git
# already have the repo? check out this version:
$ git checkout v3.14.0
└──▷ USE IT
Fail a CI step immediately if a chart lookup returns empty, preventing downstream errors from silent failures.
shell
helm search repo stable/redis --fail-on-no-result
Validate a chart against Kubernetes 1.30 APIs and deprecation rules before deploying to a newer cluster.
shell
helm lint . --kube-version 1.30.0
  • helm search now supports the --fail-on-no-result flag, allowing scripts to fail fast when a chart is not found.
  • The lint command now accepts --kube-version to specify Kubernetes version capabilities and deprecation rules during validation.
  • Added support for RISC-V architecture (linux-riscv64) binaries.
  • The ignore package is now public, enabling external projects to reuse its functionality.
  • Introduced HELM_QPS environment parameter to control query-per-second limits for Kubernetes packages.
+1 more show less
  • Allows nested tpl invocations to access defines from a containing template context.

6 details in Everything

Was this useful?

axel

v2.17.12 2 releases · 2024-01-29 Stable

axel v2.17.12 adds wolfSSL support and early redirect loop detection

└──▷ GET THIS VERSION
$ git clone --branch v2.17.12 https://github.com/axel-download-accelerator/axel.git
# already have the repo? check out this version:
$ git checkout v2.17.12
  • Added wolfSSL support for TLS connections
  • Implemented early redirect loop detection

2 details in Everything

1 more release in this issue · 2024-01-29
2.17.12 Stable

axel 2.17.12 adds wolfSSL backend and LGTM.com code scanning integration

└──▷ GET THIS VERSION
$ git clone --branch 2.17.12 https://github.com/axel-download-accelerator/axel.git
# already have the repo? check out this version:
$ git checkout 2.17.12
  • Added wolfSSL support as an alternative SSLSSLA cryptographic protocol for encrypting network connections, now deprecated in favor of TLS but whose name persists colloquially. Cyber tools reference it when handling HTTPS or other encrypted-channel inspection and termination./TLS backend for axel.

1 detail in Everything

Was this useful?
Saved in this browser. Sign in to sync your tools.