PAGES
← all tools
◆ Hacking Hardware

Flipper Zero

1.4.2 open-source

Free plan: not checked yet · Open source: yes

What you can do now

Checking Plays…

Summary

Flipper Zero is an open-source hacking-hardware device, sold as a handheld unit rather than software, that reads, stores and replays signals across Sub-GHzSub-GHzRadio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals., NFCNFCNear Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions., RFID, infrared and iButton, with Bluetooth connectivity and a companion mobile app for managing captures. It runs standalone from its own screen and buttons, or tethered to a desktop via qFlipper and a command-line interface for firmware and file management, and it takes custom firmware if the stock build is too limited. It suits security researchers, penetration testers and hardware hackers who need to test access-control systems, remotes and RFID badges in the field rather than at a workbench. It sits in the hacking-hardware category alongside other multi-protocol pentest tools, with documentation covering everything from Bad USB scripting to GPIOGPIOGeneral-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI. modules for hardware-level development. Launched in 2020, it has an active documentation set spanning firmware recovery, hardware schematics and expansion modules.

How Flipper Zero helps

Which access cards or fobs left in my desk drawer could still open a door somewhere?

reads the card's frequency and stored ID from a tap, whether it's a 125 kHz proximity badge or an NFC card, and shows the raw data it carries, so it can be checked against a door system without touching that door

Does that MIFARE Classic badge use keys weak enough to pull off the card itself?

runs its key-recovery attack against the card's sectors and reports any keys it manages to extract, revealing whether the card relies on the well-known weak defaults

What is that gate remote or key fob actually transmitting?

captures the Sub-GHz transmission on read and, when the protocol is one of the supported vendors, decodes it into a signal it can log and play back later, so the practitioner learns the protocol instead of just the frequency

Can a captured RAW Sub-GHz signal be replayed to see if a receiver still accepts it?

stores the raw waveform even when the protocol isn't recognized and can retransmit it on demand, showing whether a lock or receiver reacts to a replay

Is a given iButton key copyable, and does the copy work the same as the original?

reads the key's identifier on contact, then can write that data either to a blank iButton key or store it for reuse, letting the practitioner test the copy against the same reader

all 27 features, with the evidence for each →

Languages

Not documented

Device

Flipper Devices Flipper Zero
image © Flipper Devices · mirrored to the media CDN · original ↗

Spec · shipping Flipper Zero

frequency range
Sub-GHz 315 / 433 / 868 / 915 MHz (region-dependent); 125 kHz; 13.56 MHz
radios
Sub-GHz (CC1101), 125 kHz RFID, NFC (ST25R3916), Infrared, Bluetooth LE 5.4
processor
STM32WB55RG (Cortex-M4 64 MHz + Cortex-M0+ 32 MHz)
display
1.4 in monochrome LCD, 128x64
interfaces
USB-C 2.0, 13 GPIO pins (3.3 V, 5 V tolerant), microSD (up to 256 GB)
battery
2100 mAh LiPo (up to 28 days)

from the vendor's spec page ↗

from
$169
Flipper Zero list
stock
in stock
checked Nov 15, 2026
status
shipping
Flipper Zero · announced Jul 30, 2020
latest firmware
unlshd-095
Unleashed Firmware · Nov 11, 2026

Availability

announced
Jul 30, 2020
press
pre-order
not yet captured
no source captured
shipped
Jan 21, 2022
press
discontinued
still on sale

A slip is called out here the day the vendor's own delivery estimate moves past the promised window. A "coming" milestone is the vendor's own wording, read off the page it links to — never a date we inferred.

Price · last checked Nov 15, 2026

configuration generation launch today status source
Flipper Zero Flipper Zero $169 $169 in stock shipping list
List price of every configuration · Oct 1, 2026 → Nov 15, 2026 flipper-zero price event wayback capture
$300$200$100 Oct 1, 2026 Nov 15, 2026
40 live captures

Device history

  1. $239 → $169 price change Oct 6, 2026 · source ↗ derived

    $239 → $169 (-29%)

  2. $169 → $239 price change Oct 5, 2026 · source ↗ derived

    $169 → $239 (+41%)

  3. Flipper Zero back_in_stock Oct 4, 2026 · source ↗ derived

    no further detail captured

  4. Flipper Zero news Jul 7, 2022 · source ↗ press

    Flipper opened its own shop after shipping 90% of Kickstarter orders; the first retail batch was planned for August 2022.

  5. Flipper Zero shipped Jan 21, 2022 · source ↗ press

    Shipping to Kickstarter backers began, starting with a first batch of about 5,000 units.

  6. Flipper Zero announced Jul 30, 2020 · source ↗ press

    Kickstarter campaign launched and was funded within 8 minutes.

Other firmware for this device

  1. Nov 11, 2026 Unleashed Firmwareunlshd-095 · issue 137 Unleashed Firmware adds a Remote Analyzer app, Nero Radio and Freezer decoding, a T5577 app with Sniff Password, and new SubGHz protocols for FAAC TM and KeeLoq Phantom/Hilan⁠︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄⁠
  2. Oct 14, 2026 Unleashed Firmwareunlshd-094 · issue 109 unlshd-094 adds targeted write lists for iButton/RFID, 10+ new SubGHz protocols, Texkom NFC emulation, Seed Capturer app, and two new menu styles.⁠︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄⁠
  3. Sep 12, 2026 Unleashed Firmwareunlshd-093 · issue 086 Unleashed unlshd-093 adds Nice O-Code and Security+ 2.0 keypad support, new menu styles, and IR signal saving from Universal Remote.⁠︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄⁠
  4. Aug 21, 2026 Unleashed Firmwareunlshd-092 Unleashed Firmware unlshd-092 adds app categories, pluginized NFC scenes, and loading animation for .fap files
  5. Aug 15, 2026 Unleashed Firmwareunlshd-091 Unleashed Firmware unlshd-091 adds Native MIFARE Ultralight AES and MIFARE Ultralight C support, moves JS Runner to external app, updates API to 88.3.
  6. Jul 30, 2026 Unleashed Firmwareunlshd-090 Unleashed Firmware unlshd-090 adds MIFARE Plus native support via SL3, NFC Magic 2.0 app, Telcoma protocol, and Network/GPS RPC services
  7. May 8, 2026 Unleashed Firmwareunlshd-088 Unleashed Firmware unlshd-088 adds GPS config and Nearby Files base pack
  8. May 4, 2026 Unleashed Firmwareunlshd-087 Unleashed Firmware unlshd-087 adds dozens of new SubGHz protocols, NFC write support for ISO15693 and Mifare Ultralight C, plus two new public API functions.
  9. Mar 8, 2026 Unleashed Firmwareunlshd-086 Unleashed Firmware unlshd-086 adds Ditec GOL4 and KeyFinder SubGHz protocols, Indala 224-bit LFRFID support, and makes view_port_send_to_back public.
  10. Feb 16, 2026 Unleashed Firmwareunlshd-085 Unleashed Firmware unlshd-085 adds Cardin S449 and Beninca ARC AES128 SubGHz support, remote simulation, TX Power control, and IR to the JS engine.
  11. Dec 31, 2025 Momentum Firmwaremntm-012 Momentum mntm-012 adds MIFARE Ultralight C dictionary attacks, 10x faster Static Encrypted Nested NFC attacks, FeliCa dump/emulation, new Sub-GHz protocols, and dozens of new
  12. Dec 13, 2025 Unleashed Firmwareunlshd-084 Unleashed Firmware unlshd-084 adds experimental SubGHz counter modes and UI, Saflok MFUL parser support, and NFC performance improvements

Features

27 capabilities · 2 backed by code, an API document or a real run

Built from Flipper Zero's releases, docs, README and our own runs. “Seen” marks the month we first spotted a release the vendor didn't date. Group names and tags are our labels.

Compare with peers →

What Flipper Zero offers you

  • Command-line interface4
  • JavaScript scripting support2
  • Scripting language support2
  • Multi-factor authentication1
  • Plugin system1
  • Scripting API1
All capabilities 27 capabilities
Sub-GHz Protocol Support shipped Receives, transmits, and decodes a wide variety of Sub-GHz radio protocols including Chamberlain, Security+, custom presets, IronLogic, Comunello, Honeywell_WDB, and Magellen. 34 releases · 7 other sources · first seen Jul 2021

release 34 total

  • Adds 9 new Sub-GHz protocols to existing supported list 1.4.2 · Nov 2025 · source · release history
  • Adds SubGhz support for the Dickert MAHS garage door remote control protocol. 0.105.0 · Aug 2024 · source · release history
  • Adds Novoferm remote decode support to the Sub-GHz protocol decoder. 0.104.0 · Jul 2024 · source · release history
  • Improves Sub-GHz External CC1101 support with status output on the GDO2 pin. 0.101.2 · Apr 2024 · source · release history
  • Adds subghz tx_from_file CLI command to transmit RF files directly from the device storage 0.98.3 · Feb 2024 · source · release history
  • Adds subghz tx_from_file CLI command to transmit raw Sub-Ghz files directly from the device. 0.98.2 · Jan 2024 · source · release history

docs

  • Flipper Zero can record signals from radio remotes in RAW format without decoding, similar to how a dictaphone records sound. The signals are demodulated in accordance with modulation settings. You can use the Read RAW function for recording signals with known and unknown protocols for later playback and analysis. seen Oct 2026 · source
  • Flipper Zero ’ s sub-1 GHz module is capable of receiving signals at all frequencies in the 300-348 MHz, 387-464 MHz, and 779-928 MHz operational bands. seen Oct 2026 · source
  • Flipper Zero can work with radio remotes from various vendors presented in the table below. If your radio remote is not supported, you can help add the remote to the list of supported devices. You can leave information about your remote on the forum for analysis with our community. seen Oct 2026 · source
  • Flipper Zero can receive and transmit radio frequencies in the range of 300-928 MHz with its built-in module, which can read, save, and emulate remote controls. These controls are used for interaction with gates, barriers, radio locks, remote control switches, wireless doorbells, smart lights, and more. seen Oct 2026 · source
  • In case your radio remote is lost, or you want to have one more, you can pair Flipper Zero with your receiver as a remote. The Add Manually feature allows you to create a virtual radio remote of the same type as a receiver. seen Oct 2026 · source
  • With your Flipper Zero, you can read, save, and emulate different types of remote controls with known protocols. There are remote controls that work on protocols that Flipper Zero doesn ’ t know yet. Signals from these remotes can be recorded in raw format, saved, and replayed with the Read RAW function. docs update · Oct 2026 · source

example

  • Transmit a captured Sub-Ghz signal file stored on the device's SD card without needing a PC. subghz tx_from_file /ext/firmware/MySignal.raw 0.98.2 · Jan 2024 · source
Infrared Device Control shipped Emulates infrared signals to control external devices such as Samsung TVs and Universal AC units. 27 releases · 4 other sources · first seen Jul 2021

release 27 total

  • Adds IR command support for NAD DR2 D7050, D3020 universal remote profiles 1.2.0 · Jan 2025 · source · release history
  • Adds Toshiba RAS-2518D infrared remote codes to the universal IR remote library 0.102.3 · May 2024 · source · release history
  • Adds configurable Infrared TX output power level via new config option 0.100.3 · Apr 2024 · source · release history
  • Enables asynchronous infrared remote manipulation for non-blocking IR control 0.99.1 · Mar 2024 · source · release history
  • Adds universal infrared remote file verification before loading 0.99.1 · Mar 2024 · source · release history
  • Adds support for Carrier 42QG5A580SC and AUX YKR-H/006E air conditioners in Universal Remote 0.97.1 · Dec 2023 · source · release history

docs

  • Flipper Zero can interact with devices that use infrared (IR) light to send commands, such as TVs, air conditioners, multimedia systems, etc. With its built-in infrared module, Flipper Zero can learn and save infrared remotes and use its own universal remotes to control other devices. seen Oct 2026 · source
  • Flipper Zero allows you to control various devices without copying their original infrared (IR) remotes. With the help of the Universal Remotes feature, you can use your Flipper Zero as a universal IR remote for sending commands to TVs, sound systems, projectors, and air conditioners. seen Oct 2026 · source
  • With Flipper Zero, you can capture and save infrared (IR) signals from IR remotes. Such remotes are used to control TVs, air conditioners, projectors, audio systems, and more. The saved signals can be played back to send commands instead of the original remote. seen Oct 2026 · source
  • With I nfrared Remotes in Flipper Mobile App, you can easily control a wide range of devices, such as TVs, projectors, fans, and others. Simply select a remote in the app, point your Flipper Zero at the device, and control the device using the intuitive layout on your phone screen. docs update · Oct 2026 · source
NFC/RFID Emulation Capabilities shipped Enables emulating various card types including Mifare Classic, iCx, Opal transit cards, ISO15693 tags, and SLIX2 protocols. 21 releases · 4 other sources · first seen Jul 2021

Also counts toward: Command-line interface

release 21 total

  • Adds BackUSB subcommand for firmware-level USB device control 1.1.2 · Nov 2024 · source · release history
  • NFC: Adds emulation capability for FeliCa cards 0.103.1 · Jun 2024 · source · release history
  • Adds SLIX tag capabilities to the NFC application, enabling interaction with ISO/IEC 15693 SLIX chips 0.102.3 · May 2024 · source · release history
  • Adds universal infrared remote file verification before loading 0.99.1 · Mar 2024 · source · release history
  • Felica UID emulation allows the Flipper to emulate FeliCa cards. 0.96.1 · Dec 2023 · source · release history
  • Initial write support for Ntag21x cards is enabled. 0.96.1 · Dec 2023 · source · release history

docs

  • Flipper Zero allows you to read, save, and emulate NFC cards. An NFC card is a transponder that operates at 13.56 MHz and has a unique number (UID) as well as a part of rewritable memory for storing data. Depending on the card type, memory can be segmented into sectors, pages, applications, and more. seen Oct 2026 · source
  • Flipper Zero supports NFC technology, which is implemented in public transport smart cards, access cards or tags, and digital business cards. These cards have complex protocols and support encryption, authentication, and full-fledged two-way data transfer. seen Oct 2026 · source
  • If you couldn ’ t read all the MIFARE Classic® card ’ s sectors with the Read function or the sectors you read aren ’ t enough to get access, you can try exploiting vulnerabilities in MIFARE Classic NFC cards to get access. seen Oct 2026 · source
  • You can add new virtual cards to your Flipper Zero without reading a physical card. All you need to do is choose the protocol and enter the card ’ s data manually. The added card can be emulated or written to a T5577 blank card. On this page, you ’ ll learn how to add a new card and edit a card ’ s data. docs update · Oct 2026 · source
NFC/RFID Analysis & Detection shipped Provides tools to detect RFID technology, frequency, and read specific data formats like Opal transit cards. 21 releases · 2 other sources · first seen Jul 2021

release 21 total

  • Introduces NFC parsers for NDEF (MFUL, MFC, SLIX), Moscow social card, H World Hotel Chain Room Key, Tianjin Railway Transit, and Caltrain Clipper zones 1.1.2 · Nov 2024 · source · release history
  • Adds lfrfid GProxII protocol support for low-frequency RFID emulation and reading. 0.105.0 · Aug 2024 · source · release history
  • NFC: Adds detection support for MIFARE Plus cards 0.103.1 · Jun 2024 · source · release history
  • Adds T5577 library write with mask function for low-frequency RFID 0.99.1 · Mar 2024 · source · release history
  • Adds Gallagher access control (MIFARE Classic only) protocol support in NFC 0.99.1 · Mar 2024 · source · release history
  • Adds extended baud rate support for EM4100 LF RFID protocols 0.99.1 · Mar 2024 · source · release history

docs

  • There are NFC cards that have data organized in pages, such as MIFARE Ultralight® and NTAG® cards. If you can ’ t read all the NFC card ’ s pages with the Read function, the card might be protected with a password. seen Oct 2026 · source
  • Flipper Zero allows you to read, save, and emulate 125 kHz RFID cards. A 125 kHz RFID card is a transponder that stores a unique identification number. When scanned with a reader, a 125 kHz card transmits its ID number. If the card has the supported protocol, Flipper Zero can read and save the ID number. docs update · Oct 2026 · source
RFID Protocol Support shipped Extends RFID reader capabilities to support Kantech IOProx cards and additional protocol parsers. 15 releases · 3 other sources · first seen Jun 2022

release 15 total

  • Adds country name display for FDX-B animal tags in LF RFID reader 1.4.2 · Nov 2025 · source · release history
  • LFRFID: Adds protocol support for SecuraKey radio keys 0.103.1 · Jun 2024 · source · release history
  • Adds Electra LF RFID protocol support for reading and writing compatible tags 0.102.3 · May 2024 · source · release history
  • Adds Clipper, ITSO (UK), MiZIP / Microel, and BIP transit card parsers to NFC subsystem 0.99.1 · Mar 2024 · source · release history
  • Adds NFC plugin and parser support for WashCity cards 0.98.3 · Feb 2024 · source · release history
  • Adds support for Carrier 42QG5A580SC and AUX YKR-H/006E air conditioners in Universal Remote 0.97.1 · Dec 2023 · source · release history

docs

  • Flipper Zero supports low-frequency (LF) radio frequency identification (RFID) technology that is implemented in access control systems, animal chips, and supply chain tracking systems. Unlike NFC cards, LF RFID cards don’t usually provide high levels of security. seen Oct 2026 · source
  • A microchip is a radio-frequency identification (RFID) transponder that stores a unique identification number and is roughly the size of a grain of rice. The microchip is implanted under the animal ’ s skin. When scanned with a reader, the microchip transmits its ID number. seen Oct 2026 · source
  • In general, 125 kHz RFID cards and fobs are read-only. If writable, they typically have a password and use a chip incompatible with Flipper Zero for writing. However, there are T5577 rewritable blank cards, which can be programmed to emulate cards with various low-frequency RFID protocols. seen Oct 2026 · source
Sub-GHz Region Provisioning verified Controls transmit power and displays region settings based on geographical regulations via the UI. 16 releases · 1 other source · first seen Aug 2022

release 16 total

  • Adds binding to more JS GUI elements for advanced script UIs 1.4.2 · Nov 2025 · source · release history
  • Requires a PIN on boot if one is set, enforcing device lockout at power-on 1.1.2 · Nov 2024 · source · release history
  • Adds direct drawing applications streaming via RPC protocol 0.99.1 · Mar 2024 · source · release history
  • Enables streaming Direct Draw apps via RPC, allowing remote display updates for compatible applications 0.98.3 · Feb 2024 · source · release history
  • Adds UTF-8 string rendering support to the Flipper Zero Canvas API 0.97.1 · Dec 2023 · source · release history
  • Extra Apps are removed from the firmware and moved to the Application Catalog, requiring the companion application for installation 0.89.0 · Aug 2023 · source · release history

command line

Build System Extensions verified Adds support for Flash USB updates, Blackmagic probe integration, autostart loaders, and binary flash size statistics to the build toolchain. 10 releases · 3 other sources · first seen Sep 2020

Also counts toward: Command-line interface

release 10 total

  • ./fbt flash command auto-detects connected wired or wireless programmers during firmware building. 0.90.1 · Aug 2023 · source · release history
  • Adds uFBT devboard_flash subcommand to update WiFi devboard firmware via the build toolchain 0.89.0 · Aug 2023 · source · release history
  • Enables running the SubGhz application as an external FAP via the new SubGhz test app 0.87.0 · Jul 2023 · source · release history
  • fbt removed the DEBUG_TOOLS and FAP_EXAMPLES build flags. 0.76.0 · Feb 2023 · source · release history
  • Adds LOADER_AUTOSTART support in the fbt build system 0.64.3 · Aug 2022 · source · release history
  • Adds binary flash size stats in pages via fwsize.py in the build system 0.64.3 · Aug 2022 · source · release history

command line

BadUSB Scripting Engine shipped Allows writing and executing scripts with keyboard layout support, timing controls, conditional waits, and legacy boot protocol compatibility. 12 releases · first seen Feb 2023

Also counts toward: Scripting API, Scripting language support

release 12 total

  • Adds F13-F24 function key mapping support in BadUSB 0.100.3 · Apr 2024 · source · release history
  • Enables DEFAULT_STRING_DELAY configuration for BadUSB layouts via config file 0.100.3 · Apr 2024 · source · release history
  • Adds JS CLI command to execute JavaScript scripts directly from the console 0.100.3 · Apr 2024 · source · release history
  • Adds BLE transport layer support to the BadUSB application alongside existing USB HID 0.100.3 · Apr 2024 · source · release history
  • Adds JavaScript scripting support with initial Serial and BadUSB modules for automated workflows 0.99.1 · Mar 2024 · source · release history
  • BadUSB qFlipper installer script added for macOS environments 0.89.0 · Aug 2023 · source · release history
NFC UID Modification shipped Allows editing and modifying the unique identifiers of saved NFC tags. 7 releases · 1 other source · first seen Aug 2022

release 7 total

  • Adds custom UID entry capability when manually adding NFC cards 0.99.1 · Mar 2024 · source · release history
  • Adds NFC MFC (Mifare Classic) support for reading/writing keys. 0.88.0 · Aug 2023 · source · release history
  • Enables Picapass to use factory keys for Mifare Classic card interactions. 0.78.1 · Feb 2023 · source · release history
  • New MFC Data view in the NFC app displays Mifare Classic card data directly. 0.78.1 · Feb 2023 · source · release history
  • Adds MFC block value commands support in NFC 0.77.1 · Feb 2023 · source · release history
  • Adds Edit UID feature for saved NFC files 0.64.3 · Aug 2022 · source · release history

docs

  • Standard NFC cards have unique identifier (UID) numbers assigned by the manufacturer. These numbers can ’ t be changed. NFC magic or UID rewritable are special cards that can change their UIDs. That makes magic cards more powerful — they can copy the UID and data of an original card. seen Oct 2026 · source
USB HID Peripheral Emulation shipped Extends BadUSB capabilities to include mouse emulation and auto-clicker functions via USB or BLE. 5 releases · 2 other sources · first seen Mar 2022

release

  • Adds initial CCID support for USB-connected smart card readers via the new USB CCID API in FuriHal. 0.92.2 · Sep 2023 · source · release history
  • Adds HID mouse auto-clicker feature (USB/BLE Remote) 0.83.1 · May 2023 · source · release history
  • Changes BadUSB USB vid/pid/strings values. 0.52.3 · Mar 2022 · source · release history
  • BadUSB vid/pid/strings identifiers changed, potentially breaking existing host-side detection or scripts relying on previous values 0.52.2 · Mar 2022 · source · release history
  • Changes BadUSB vid/pid/strings identifiers to new values, requiring updated demo scripts 0.52.2 · Mar 2022 · source · release history

docs

  • F lipper Zero can act as a BadUSB device , r ecognized by computers as a Human Interface Device (HID), such as a keyboard or even a mouse. A BadUSB device can change system settings, open backdoors, retrieve data, initiate reverse shells, or do basically anything that can be achieved with physical access. seen Oct 2026 · source
  • Flipper Zero can act as a USB universal 2nd-factor (U2F) authentication token or security key that can be used as the second authentication factor when signing in to web accounts. A security key is a small device that helps computers verify that it is you when signing in to an account. seen Oct 2026 · source
iButton Key Support shipped Reads, saves, emulates, writes, and modifies iButton access control keys using Dallas, Cyfral, and Metakom protocols. 2 releases · 4 other sources · first seen Aug 2021

release

  • Adds onewire search command to the CLI interface 0.28.2 · Sep 2021 · source · release history
  • Indala reading and writing support via [FL-1449] Indala reading and writing (#616) 0.25.0 · Aug 2021 · source · release history

docs

  • Flipper Zero supports a 1-Wire device communication protocol, which is implemented in small electronic keys known as iButton keys. These keys are used for access control, temperature measurements, humidity measurements, storing cryptographic keys, etc. seen Oct 2026 · source
  • Flipper Zero enables you to conveniently read, save, and emulate iButton access control keys with Dallas, Cyfral, and Metakom protocols. Additionally, you can modify the unique IDs (UIDs) of saved keys. seen Oct 2026 · source
  • Besides reading and saving physical iButton keys, you can emulate them with your Flipper Zero. On this page, you’ll find instructions on how to create a virtual version of an iButton key and emulate it using your Flipper Zero. seen Oct 2026 · source
  • Once you have read and saved Dallas iButton keys, you can write some of them to physical blanks or iButton touch memory keys of the same type. On this page, you’ll learn about compatible blanks and keys and how to write data to them. docs update · Oct 2026 · source
External Flash Programming shipped Allows the device to act as an ISP programmer for AVR microcontrollers and manage SPI memory chips. 3 releases · 1 other source · first seen Feb 2023

release

  • Adds support for writing TM01x Dallas ID keys in iButton module 1.4.2 · Nov 2025 · source · release history
  • Adds new AVR Flasher app with support for acting as an AVR ISP Programmer or performing standalone read/write operations. 0.81.1 · Apr 2023 · source · release history
  • Adds new application SPI Mem Manager for reading and writing SPI memory chips 0.77.1 · Feb 2023 · source · release history

docs

  • You can use your Flipper Zero for hardware exploration, firmware flashing, debugging, and fuzzing. Flipper Zero can be connected to hardware using its built-in GPIO pins, control hardware with buttons, run your code, and show debug messages on the screen. seen Oct 2026 · source
Device Management & Security shipped Enforces PIN-based boot lockout and provides alarm functionality to wake the device from shutdown mode. 3 releases · 1 other source · first seen Mar 2022

release

  • Requires a PIN on boot if one is set, enforcing device lockout at power-on 1.1.2 · Nov 2024 · source · release history
  • This update resets your PIN code; you must set it up again in Settings -> Desktop. 0.105.0 · Aug 2024 · source · release history
  • Ble: Hides the pin code on screen when the device is locked. 0.50.0 · Mar 2022 · source · release history

docs

  • The application allows you to manage various parameters of your Flipper Zero. You can customize settings such as the Bluetooth connection, screen brightness, storage, and power management, as well as secure your device by setting a PIN code. seen Oct 2026 · source
Desktop UI Customization shipped Adds a Dummy mode to the Desktop interface for testing or specific use cases. 4 releases · first seen Mar 2022

release

  • Adds fully configurable dummy mode to the Desktop app for simulating device behavior without hardware interaction. 0.90.1 · Aug 2023 · source · release history
  • Desktop UI gains a clock widget in the status bar 0.89.0 · Aug 2023 · source · release history
  • Adds Dummy mode to the Desktop interface 0.67.2 · Sep 2022 · source · release history
  • Notification and Gpio apps: Keep the backlight always-on when the device is locked. 0.50.0 · Mar 2022 · source · release history
Infrared Protocol Support shipped Adds CLI decoding capabilities and improves infrared protocol handling. 4 releases · first seen Jul 2021

Also counts toward: Command-line interface

release

  • Infrared: cli decoding command and improvements 0.66.1 · Sep 2022 · source · release history
  • [FL-1800] IRDA: enc/decoder refactoring, Add NEC42 (#705) 0.31.2 · Sep 2021 · source · release history
  • Adds RC5 decoder support to IRDA protocol handling 0.28.2 · Sep 2021 · source · release history
  • Adds support for RC-6 protocol in IRDA with timing encoder implementation 0.22.0 · Jul 2021 · source · release history
JavaScript SDK shipped Provides a development kit with modules for GUI, event loops, GPIO, and command-line argument parsing to build custom applications. 3 releases · first seen Sep 2020

Also counts toward: JavaScript scripting support, Scripting language support

release

  • Adds JavaScript value destructuring syntax (const { a, b } = obj) in the JS SDK. 1.3.4 · Apr 2025 · source · release history
  • Adds u8g2 library support 0.2.0 · Sep 2020 · source · release history
  • Adds example_uart_write application to the example_blink application set 0.2.0 · Sep 2020 · source · release history
Application Execution Environment shipped Enables executing standalone applications (FAPs) from SD cards using the SDK ELF loader. 2 releases · 1 other source · first seen Sep 2022

Also counts toward: JavaScript scripting support

release

  • Expands the JavaScript API with math, textbox, and submenu modules for custom apps 0.102.3 · May 2024 · source · release history
  • Enables executing applications from the SD card via the SDK ELF loader (FAPs) 0.67.2 · Sep 2022 · source · release history

docs

  • On this page, you’ll learn how to insert, format, and safely remove a microSD card. Make sure you have a microSD card in your Flipper Zero before updating the firmware. The microSD card stores various types of data, such as keys, cards, remotes, databases, and more. seen Oct 2026 · source
Firmware Recovery & Reset documented Provides procedures to repair corrupted firmware, reboot an unresponsive device, and reset the device to factory settings. 3 other sources

docs

  • Occasionally, your Flipper Zero may fail to update correctly, display images, or respond to button presses. These issues could be caused by corruption in the device’s firmware. On this page, you’ll learn how to repair the corrupted firmware of your Flipper Zero. seen Oct 2026 · source
  • We regularly update the firmware. These updates improve the device ’ s performance, but there may be cases where your Flipper Zero becomes unresponsive or freezes after an update. In most cases, a normal reboot will fix the problem. seen Oct 2026 · source
  • If you can’t update your Flipper Zero via the qFlipper application or Flipper Mobile App, full or broken internal storage might be the cause. To resolve this issue, we recommend resetting your Flipper Zero to its factory settings. Flipper Zero stores data on the inserted microSD card and internal storage. seen Oct 2026 · source
BadUSB Scripting Engine Expansion shipped Enables complex HID attacks with arbitrary key combinations and adds dedicated support for wireless BLE-based BadUSB payloads. 2 releases · first seen Nov 2024

release

  • Expands BadUSB payloads to support arbitrary key combinations for complex HID attacks. 1.3.4 · Apr 2025 · source · release history
  • Splits the legacy BadUSB app into BadUSB (local keyboard emulation) and BadBLE (wireless BLE mode) 1.1.2 · Nov 2024 · source · release history
NFC Write Capabilities shipped Enables writing data to specific NFC card types such as MIFARE Ultralight. 1 release · 1 other source · first seen Jun 2024

release

  • NFC: Enables write support for MIFARE Ultralight cards 0.103.1 · Jun 2024 · source · release history

docs

  • With Flipper Zero, you can create various NFC cards that can be programmed as keys in access control systems or write various data onto them using your smartphone, such as links to your personal website, resume, or business card. seen Oct 2026 · source
CLI Extension System shipped Allows loading extra CLI commands from libraries stored on the SD card and linking multiple apps into a single workflow. 1 release · first seen Apr 2025

Also counts toward: Command-line interface, Plugin system

release

  • Supports loading extra CLI commands from libraries stored on the SD card. 1.3.4 · Apr 2025 · source · release history
NFC Authorization Support shipped Supports authorization and authentication for encrypted NFC cards like Ultralight C using DES keys. 1 release · first seen Jul 2024

release

  • Adds Ultralight C authorization support using a DES key for NFC card emulation/authentication. 0.104.0 · Jul 2024 · source · release history
NFC Mifare Classic API Access shipped Provides programmatic access to controlled sector trailer reads for NFC Mifare Classic cards. 1 release · first seen Jul 2024

release

  • Adds mf_classic_set_sector_trailer_read function to the NFC MFC API for controlled sector trailer reads. 0.104.0 · Jul 2024 · source · release history
BLE Remote Procedure Calls shipped Provides a Bluetooth Low Energy remote procedure call interface for device information retrieval and management. 1 release · first seen Mar 2022

release

  • Adds BLE rpc version characteristic to the device info service 0.52.2 · Mar 2022 · source · release history
U2F Authentication Support shipped Enables universal second factor (U2F) authentication workflows through prototype integration. 1 release · first seen Dec 2021

Also counts toward: Multi-factor authentication

release

  • Adds U2F prototype support for universal second factor authentication workflows. 0.44.1 · Dec 2021 · source · release history
NFC Long APDU Emulation shipped Enables emulation of long APDU sequences for NFC communications. 1 release · first seen Aug 2021

release

  • NFC long APDU emulation capability via [FL-1619] NFC long APDU emulation (#623) 0.25.0 · Aug 2021 · source · release history
Firmware Update documented Supports updating device firmware via the Flipper Mobile App or qFlipper desktop application. 1 other source

docs

  • We are constantly updating Flipper Zero firmware. We recommend updating your device regularly to get the latest features and improvements. You can update your Flipper Zero via Flipper Mobile App or qFlipper On this page, you’ll learn how to update your Flipper Zero firmware via Flipper Mobile App and qFlipper. seen Oct 2026 · source

Lines in monospace are the tool's own words: help text parsed from its source, or an endpoint from its API document. Under release, a line is our summary of a dated release. Under docs, it is quoted from the tool's own documentation or website. Each links back to the source it came from.

Score card

  1. Shipping velocity releases a month, last 12 months
  2. Documentation quality release-notes rubric, 0–100
  3. Breaking-change discipline how rarely a release breaks users, and notice given
  4. Maintenance risk quiet time against its own cadence, maintainers
  5. Innovation & surface new capabilities, API and MCP surface
  6. Community health
  7. Contributor trend distinct committers, this year against last
  8. Maintainer concentration bus factor now against a year ago
  9. Issue backlog trend issues closed per issue opened, 12 months
  10. Responsiveness median time to a maintainer’s first reply

Nine scores for Flipper Zero, each built from the releases, notes and API history this site tracks — and, on Researcher and Business, where it stands among every measured tool in its category and how that has moved.

Score cards are part of every paid plan.

See plans →

Each score is 0–100 on a published rubric, derived from data this site already shows. A dimension we cannot measure says so — it is never scored 0 and never enters a rank.

How this is scored
  • Shipping velocity — releases a month over the last 12 months, on a log scale where 16 a month scores 100. Needs 3 releases in the window.
  • Documentation quality — the release-notes rubric published on the analytics page, unchanged.
  • Breaking-change discipline — the share of releases carrying a breaking change (none scores 100, half or more scores 0). Only projects that label breaking changes are measured: a clean record cannot be told from an unlabelled one.
  • Maintenance risk — quiet time measured against the tool's own release cadence (quiet longer than 90 days and three typical gaps scores 0), plus the number of active maintainers and whether contributors are growing, where known. Higher is lower risk.
  • Innovation & surface — new capabilities in the feature ledger this year, API and MCP operations added, and the share of commits that are features: the mean of whichever we hold.
  • Community health (open-source tools only) — each is a direction, not a size: contributors this year against last, the bus factor now against a year ago, and issues closed per issue opened, where steady scores 50, doubled 100 and halved 0; plus the median time to a maintainer's first reply (an hour scores about 100, a month or more 0). A commercial card has no repository and carries none of the four.
  • Documented delivery (commercial tools) — when a vendor's documented new capabilities have slowed against its own baseline, that counts against the overall standing as heavily as two low dimensions. Steady delivery, or too little history to judge, leaves the standing alone; it is never a sixth score.
  • Open-source tools are scored on repository signals; commercial tools on their published changelog. Ranks compare tools within one category and one profile and need at least five measured peers; the overall standing needs three ranked dimensions. Best-in-breed or consolidator is a shape, not a quality, and is never scored.

Release-note detail over time

See how much detail Flipper Zero puts in its release notes, quarter by quarter, and compare it with tracked tools in the same category. This history uses up to ten retained, reviewed notes per tool; sparse or blank older quarters may reflect that limit.

Checking release-note history…

Explore the full chart →

Website history

flipper.net, every change

Flipper Devices's product page and 8 more pages as they looked each month from May 2026 to November 2026: 11 renders, 0 changes of tagline or palette. Step through them, play them, or put any two months side by side.

Website history is included with Researcher and Business.

See plans →

Documentation timing

See whether Flipper Zero's docs change before or after its release notes, release by release.

Documentation timing is included with Practitioner, Researcher and Business. When the docs come first, you can read about a change before it's announced.

See plans → Already subscribed? Sign in →

Coverage

Missing something? Tell us

What Flipper Zero connects to, runs on and detects, read from its release notes and docs. So far: 2 new supported platforms.

Show

2 changes, tracked since Oct 3, 2026.

  • Oct 32026

    new Manual 125 kHz RFID card entry supporting 23 protocols

    Covers 24: EM-Micro EM4100, EM-Micro EM4100/32, EM-Micro EM4100/16, HID H10301, IDTECK Idteck, Motorola Indala 26 and 18 more

    Source ↗

  • Oct 32026

    new 125 kHz RFID protocol support documentation

    No new names. Restates the 24 already listed.

    Source ↗

How we count

Read from 3 of 92 release notes and docs updates we hold for Flipper Zero. "First seen" is the earliest note that names something; "last" is the latest. Our history may start partway through Flipper Zero's life, so an old integration can show a recent first-seen date.

Each change counts once: "added 40 checks" is one line, so the numbers measure how often coverage moves, not how big the catalogue is or how well it detects.

Releases

Show
Coverage in all entries

92 entries

  1. October 20268
  2. November 20251
  3. April 20251
  4. January 20251
  5. November 20241
  6. September 20241
  7. August 20241
  8. July 20241
  9. June 20241
  10. May 20241
  11. April 20242
  12. March 20241
  13. February 20241
  14. January 20241
  15. December 20232
  16. November 20232
  17. September 20232
  18. August 20233
  19. July 20233
  20. June 20233
  21. May 20231
  22. April 20232
  23. March 20232
  24. February 20233
  25. January 20231
  26. December 20223
  27. November 20223
  28. October 20223
  29. September 20222
  30. August 20224
  31. July 20221
  32. June 20223
  33. May 20222
  34. April 20223
  35. March 20224
  36. February 20223
  37. January 20221
  38. December 20213
  39. November 20211
  40. October 20212
  41. September 20212
  42. August 20214
  43. July 20211
  44. September 20201
    Show
    Coverage in all entries

    92 entries

    Project health

    Issue, contributor and maintainer activity in flipperdevices/flipperzero-firmware, 2023-12 – 2026-11, as of 2026-11-03. Twelve-month figures first; the trend lines run the whole window.

    1. Contributors 35 −18 vs prior 12 months
    2. Maintainers 4 +5 joined · −9 left, last 12 months
    3. Bus factor 2 committers behind half the commits
    4. Community-filed 100% of issues opened, last 12 months
    5. Median time to close 44 days first maintainer reply 11 days
    6. Open backlog 178 of 1,212 issues ever filed
    1. Issues opened / month 5 · 0 communitymaintainers
    2. Open backlog 178
    3. Contributors / month 0
    4. Commits / month 0
    5. Stars not measured
    Issue themes, last 12 months
    • bugs 4%
    • other 96%

    Counts from the project's public repository and git history; no individuals are identified. Maintainers are the committers covering 80% of the last year's commits. how we measure this

    Articles

    1 article · updated Nov 10, 2026

    Where Flipper Zero turns up in what others publish: how-tos, attack reports that name it, and incident write-ups. A row says why it is here and quotes where the article names it; the link goes to the publisher.

    Tutorials & guides 1

    • Share Nintendo Miis via Flipper Zero DEV Community
      This tutorial outlines the basics of sharing a Mii via Nfc using A Flipper Zero.
      1 more quote
      Sending a Mii The first thing you need is a Nintendo Switch or 3DS (obvious) and a Flipper Zero.

    Libraries its release ships

    What its latest release locks, checked against known advisories.

    None of its release's images build from a lockfile we can read.

    Add the badge to your README

    Maintain this project? The badge links readers straight to this page, so they can follow every release here.

    Tracked by Cyber Toolchain Choose a badge style and copy the code →
    Saved in this browser. Sign in to sync your tools.