No entries match these filters. Clear filters
price change · Oct 6, 2026
Oct 6, 2026
·
issue 096
Flipper Zeroflipper-zero
$169
was $239
▼ down $70 · 29%
list price at flipper.net · Oct 6, 2026
price change · Oct 5, 2026
Oct 5, 2026
·
issue 095
Flipper Zeroflipper-zero
$239
was $169
▲ up $70 · 41%
list price at flipper.net · Oct 5, 2026
back in stock · Oct 4, 2026
Oct 4, 2026
·
issue 095
Flipper Zero (flipper-zero) back in stock at flipper.net on 4 Oct 2026.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet
Flipper Zero now supports writing memory data from DS1992, DS1996, and DS1971 iButton keys to a key of the same type.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
Adds Full Write on Same Type option (Main Menu -> iButton -> Saved) to write memory data from DS1992, DS1996, and DS1971 iButton keys to another key of the same type.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Adds Write ID option to write only the UID from a saved Dallas iButton key to a compatible blank. Not checked yet Supports writing to RW1990, TM1990, TM08v2 (compatible with DS1990), and RW2004 (compatible with DS1990 and DS1992) blanks. Not checked yet
3 details in Everything
Flipper Mobile App gains Remotes Library for finding, saving, and replaying IR remotes from an open-source database.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
Adds Remotes Library in Flipper Mobile App (Main Menu -> Tools -> Remotes Library) to browse an open-source IR signal database, test signals against your device, and download the matched remote to Flipper Zero.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Supports IR remotes for TV, Projector, TV Box, Fan, Air Purifier, DVD Player, Camera, and AV Receiver device types. Not checked yet Enables saving matched IR remotes by name and optionally adding them to Favorites for quick access via the Archive tab (Main Menu -> Archive -> Infrared). Not checked yet Allows saved IR remotes to be used either through the Flipper Mobile App's virtual remote layout (app instructs Flipper Zero to transmit) or directly on Flipper Zero via Main Menu -> Infrared -> Saved. Not checked yet
4 details in Everything
Flipper Zero adds manual entry and editing of 125 kHz RFID virtual cards; cards can be emulated or written to a T5577 T5577 A reprogrammable RFID chip commonly used in 125 kHz proximity cards, widely supported by researchers because it can emulate many legacy card formats for access-control testing. blank.
New supported platform Adds Add Manually option under Main Menu -> 125 kHz RFID to create virtual RFID cards without a physical card. Not checked yet Adds Edit action under Main Menu -> 125 kHz RFID -> Saved to modify hexadecimal card data for both manually entered and physically captured 125 kHz RFID cards. Not checked yet Manually added virtual cards can be emulated or written to a T5577 blank card. Not checked yet
3 details in Everything
Flipper Zero Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. docs now cover Frequency Analyzer, Hopping mode, Bin_RAW processing, walkie-talkie listening via buzzer, and modulation config details.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
Adds Bin_RAW option to process undecoded RAW signals by eliminating background noise, removing repeating segments, and correcting timing errors.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Documents Hopping mode (set to ON in Config) to scan across all available frequencies, stopping when signal strength exceeds -90 dBm. Not checked yet Documents Frequency Analyzer feature under Main Menu -> Sub-GHz -> Frequency Analyzer, which scans all available frequencies and displays up to 15 results sorted by RSSI, with a -90 dBm threshold. Not checked yet Documents Lock Keyboard option in the Config menu to lock the keypad during Sub-GHz signal scanning. Not checked yet Documents manual modulation selection supporting AM270, AM650 (default), FM238, and FM476 settings in the Configuration Menu. Not checked yet
+2 more
show less
Enables listening to analog walkie-talkies via the Flipper Zero buzzer using Sub-GHz -> Read or Read RAW with Modulation set to FM238 and Sound set to ON. Not checked yet Documents RSSI Threshold configuration in Read RAW mode to record only signals exceeding a set signal strength level when listening to walkie-talkies. Not checked yet
Adds Bin_RAW option to process undecoded RAW signals by eliminating background noise, removing repeating segments, and correcting timing errors.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Documents Hopping mode (set to ON in Config) to scan across all available frequencies, stopping when signal strength exceeds -90 dBm. Not checked yet Documents Frequency Analyzer feature under Main Menu -> Sub-GHz -> Frequency Analyzer, which scans all available frequencies and displays up to 15 results sorted by RSSI, with a -90 dBm threshold. Not checked yet Documents Lock Keyboard option in the Config menu to lock the keypad during Sub-GHz signal scanning. Not checked yet Enables listening to analog walkie-talkies via the Flipper Zero buzzer using Sub-GHz -> Read or Read RAW with Modulation set to FM238 and Sound set to ON. Not checked yet
+1 more
show less
Documents RSSI Threshold configuration in Read RAW mode to record only signals exceeding a set signal strength level when listening to walkie-talkies. Not checked yet
1 more in Everything
Flipper Zero 1.4.2 adds nfc and buzzer CLI commands, 9 new Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocols, JS GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. bindings, and iButton TM01x write support
└──▷ GET THIS VERSION
copy
$ git clone --branch 1.4.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 1.4.2
Adds nfc CLI command for low-level NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. interaction Not checked yet Adds 9 new Sub-GHz protocols to existing supported list Not checked yet Adds buzzer CLI command to control the device buzzer Not checked yet Adds binding to more JS GUI elements for advanced script UIs Not checked yet Adds support for writing TM01x Dallas ID keys in iButton module Not checked yet
+1 more
show less
Adds country name display for FDX-B animal tags in LF RFID reader Not checked yet
6 details in Everything
└──▷ BREAKING ON UPGRADE
! Existing BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. device pairings are potentially susceptible to brute-force attack; users must un-pair all devices from Flipper's settings and re-pair them
Flipper Zero 1.3.4 adds application chaining, new JS destructuring, and BadUSB arbitrary key combinations
└──▷ GET THIS VERSION
copy
$ git clone --branch 1.3.4 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 1.3.4
Enables app_chain to link multiple apps into a single workflow via the CLI. Not checked yet Adds JavaScript value destructuring syntax (const { a, b } = obj) in the JS SDK. Not checked yet Expands BadUSB payloads to support arbitrary key combinations for complex HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. attacks. Not checked yet Allows NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. apps like MFKey32 to be launched directly from the NFC scanner interface. Not checked yet Supports loading extra CLI commands from libraries stored on the SD card. Not checked yet
5 details in Everything
Flipper Zero 1.2.0 adds IR commands for NAD remotes, FuriThread stdin pipe support, and one-shot RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. signals
└──▷ GET THIS VERSION
copy
$ git clone --branch 1.2.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 1.2.0
Adds IR command support for NAD DR2 D7050, D3020 universal remote profiles Not checked yet Adds flipper_format_write_empty_line(...) function to the flipper format API Not checked yet
2 details in Everything
Flipper Zero 1.1.2 adds JS SDK, split BadUSB/BadBLE, new NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. parsers, and PIN on boot.
└──▷ GET THIS VERSION
copy
$ git clone --branch 1.1.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 1.1.2
Adds BackUSB subcommand for firmware-level USB device control Not checked yet Splits the legacy BadUSB app into BadUSB (local keyboard emulation) and BadBLE (wireless BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. mode) Not checked yet Introduces a new v0.1 JS SDK with modules for GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. , event loop, GPIO GPIO General-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI. , and other subsystems via npm Not checked yet Adds fz-sdk npm package to manage the JavaScript development toolkit Not checked yet Requires a PIN on boot if one is set, enforcing device lockout at power-on Not checked yet
+4 more
show less
Enables alarm functionality to wake the Flipper from shutdown mode Not checked yet Adds support for direct Clock and Alarm configuration in settings Not checked yet Expands SubGhz Keeloq decoding with new Monarch keys Not checked yet Introduces NFC parsers for NDEF (MFUL, MFC, SLIX), Moscow social card, H World Hotel Chain Room Key, Tianjin Railway Transit, and Caltrain Clipper zones Not checked yet
9 details in Everything
└──▷ BREAKING ON UPGRADE
! Downgrading to firmware prior to 1.1.2 will result in the inability to show battery status unless the gauge is reset by disconnecting the battery or using the gauge tool.! Downgrading to firmware prior to 1.1.2 will cause the alarm feature to malfunction unless it is disabled before downgrading.
Flipper Zero 1.0.1 adds Procrastination animation, Happy mode config, Extract MF Keys NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. feature, and 5V GPIO GPIO General-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI. control for extensions.
└──▷ GET THIS VERSION
copy
$ git clone --branch 1.0.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 1.0.1
Adds the new Procrastination dolphin animation Not checked yet Adds configurable always happy mode to dolphin settings Not checked yet Renames the NFC sub-menu option from Detect Reader to Extract MF Keys Not checked yet Adds new Linux BadUSB example resource files Not checked yet Enables external modules to enable 5V throw RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. or Extension protocol via 5V on GPIO control Not checked yet
5 details in Everything
Flipper Zero 0.105 adds LFRFID GProxII and SubGhz Dickert MAHS protocol support
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.105.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.105.0
Adds lfrfid GProxII protocol support for low-frequency RFID emulation and reading. Not checked yet Adds SubGhz support for the Dickert MAHS garage door remote control protocol. Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! This update resets your PIN code; you must set it up again in Settings -> Desktop.
Flipper Zero 0.104.0 adds Novoferm Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. decoding, Ultralight C auth, mf_classic API, and uFBt ARGS
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.104.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.104.0
Adds Novoferm remote decode support to the Sub-GHz protocol decoder. Not checked yet Adds mf_classic_set_sector_trailer_read function to the NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. MFC API for controlled sector trailer reads. Not checked yet Adds Ultralight C authorization support using a DES key for NFC card emulation/authentication. Not checked yet Adds ARGS argument parsing support in uFBt CLI tools via the command line parser extension. Not checked yet Enables closing apps from CLI if they support signals (all ViewDispatcher/EventLoop based apps now closed before new start). Not checked yet
5 details in Everything
Flipper Zero 0.103.1 adds CLI top command, RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. TarExtract, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. MIFARE Plus/FeliCa FeliCa A contactless smart card standard developed by Sony, widely used in Japanese transit and payment systems, operating at 13.56 MHz with its own proprietary protocol distinct from ISO 14443. emulation/ultralight write, LFRFID SecuraKey, and Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Princeton guard time config.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.103.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.103.1
CLI: Adds the top subcommand to display runtime process statistics on the device Not checked yet RPC: Adds a new TarExtract command for on-device file extraction from archives Not checked yet NFC: Adds detection support for MIFARE Plus cards Not checked yet NFC: Adds emulation capability for FeliCa cards Not checked yet NFC: Enables write support for MIFARE Ultralight cards Not checked yet
+2 more
show less
LFRFID: Adds protocol support for SecuraKey radio keys Not checked yet Sub-GHz : Adds custom guard time configuration for the Princeton protocol Not checked yet
7 details in Everything
Flipper Zero v0.102.3 adds Electra RFID protocol, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. SLIX capabilities, JS math/GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. modules, and a new map analyzer.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.102.3 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.102.3
Adds Electra LF RFID protocol support for reading and writing compatible tags Not checked yet Adds SLIX tag capabilities to the NFC application, enabling interaction with ISO ISO A widely adopted international standards body that publishes technical specifications; cyber tools cite ISO standards to signal compliance with recognized benchmarks for quality, security, or interoperability. /IEC 15693 SLIX chips Not checked yet Adds a new map_analyzer feature to visualize and analyze collected map data Not checked yet Introduces Skylanders plugin for interacting with Skylanders game figures via NFC Not checked yet Expands the JavaScript API with math, textbox, and submenu modules for custom apps Not checked yet
+1 more
show less
Adds Toshiba RAS-2518D infrared remote codes to the universal IR remote library Not checked yet
6 details in Everything
Flipper Zero 0.101.2 adds NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. FeliCa FeliCa A contactless smart card standard developed by Sony, widely used in Japanese transit and payment systems, operating at 13.56 MHz with its own proprietary protocol distinct from ISO 14443. Lite read, external CC1101 support, ADC API, and BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. GapPairingNone.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.101.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.101.2
Improves Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. External CC1101 support with status output on the GDO2 pin. Not checked yet Adds ADC API in FuriHal for hardware access. Not checked yet Adds BLE GapPairingNone support to disable pairing prompts. Not checked yet
3 details in Everything
Flipper Zero 0.100.3 adds JS CLI command, BadUSB BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. support, SLIX privacy, Unicode GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. canvas API, and configurable IR TX output.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.100.3 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.100.3
Adds JS CLI command to execute JavaScript scripts directly from the console Not checked yet Adds BLE transport layer support to the BadUSB application alongside existing USB HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. Not checked yet Enables DEFAULT_STRING_DELAY configuration for BadUSB layouts via config file Not checked yet Adds F13-F24 function key mapping support in BadUSB Not checked yet Adds configurable Infrared TX output power level via new config option Not checked yet
+1 more
show less
Adds Unicode text rendering and new Canvas API functions to the GUI subsystem Not checked yet
6 details in Everything
Flipper Zero 0.99.1 adds JavaScript scripting with Serial and BadUSB modules, new NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. card parsers, and universal IR remote verification
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.99.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.99.1
Adds JavaScript scripting support with initial Serial and BadUSB modules for automated workflows Not checked yet Adds Clipper , ITSO (UK), MiZIP / Microel, and BIP transit card parsers to NFC subsystem Not checked yet Adds Gallagher access control (MIFARE Classic MIFARE Classic A family of contactless smart card chips made by NXP, widely used in access control and transit systems, whose weak proprietary encryption makes it a frequent target for RFID analysis and cloning tools. only) protocol support in NFC Not checked yet Adds SLIX privacy mode disabling feature for compatible NFC tags Not checked yet Adds custom UID entry capability when manually adding NFC cards Not checked yet
+6 more
show less
Adds T5577T5577 A reprogrammable RFID chip commonly used in 125 kHz proximity cards, widely supported by researchers because it can emulate many legacy card formats for access-control testing. library write with mask function for low-frequency RFID Not checked yet Adds extended baud rate support for EM4100 LF RFID protocols Not checked yet Adds universal infrared remote file verification before loading Not checked yet Enables asynchronous infrared remote manipulation for non-blocking IR control Not checked yet Adds Firebase notifications upon firmware update completion Not checked yet Adds direct drawing applications streaming via RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. protocol Not checked yet
11 details in Everything
Flipper Zero 0.98.3 adds subghz tx_from_file CLI cmd, new FuriHal serial API, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. WashCity plugin, and Direct Draw RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. streaming.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.98.3 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.98.3
Adds subghz tx_from_file CLI command to transmit RF files directly from the device storage Not checked yet Introduces a new FuriHal serial API with separate control plane for improved serial communication management Not checked yet Adds NFC plugin and parser support for WashCity cards Not checked yet Enables streaming Direct Draw apps via RPC, allowing remote display updates for compatible applications Not checked yet
4 details in Everything
Flipper Zero 0.98.2 adds subghz tx_from_file CLI cmd, new expansion module protocol, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. DESFire improvements, and HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. MFC plugin.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.98.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.98.2
└──▷ TRY IT
Transmit a captured Sub-Ghz signal file stored on the device's SD card without needing a PC.
copy
$ subghz tx_from_file /ext/firmware/MySignal.raw
Adds subghz tx_from_file CLI command to transmit raw Sub-Ghz files directly from the device. Not checked yet Introduces a new configurable serial logging feature via FuriHal's new serial API with separate control plane. Not checked yet Adds HID MFC plugin for emulating MIFARE Classic MIFARE Classic A family of contactless smart card chips made by NXP, widely used in access control and transit systems, whose weak proprietary encryption makes it a frequent target for RFID analysis and cloning tools. cards via HID interface. Not checked yet
3 details in Everything
Flipper Zero 0.97.1 adds MyKey and Umarsh NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. card parsing, USART DE/RE pin control, UTF-8 canvas API, and new IR device support
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.97.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.97.1
Adds MyKey parser to recognize and emulate MyKey smart cards over NFC Not checked yet Adds Umarsh transport card parser for detecting Umarsh smart cards over NFC Not checked yet Adds software control of DE/RE pins in the USART Bridge via UART UART A hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack. bridge protocol Not checked yet Adds UTF-8 string rendering support to the Flipper Zero Canvas API Not checked yet Adds support for Carrier 42QG5A580SC and AUX YKR-H/006E air conditioners in Universal Remote Not checked yet
+1 more
show less
Adds support for Philips OLED 934/12 TV in Universal Remote Not checked yet
6 details in Everything
Flipper Zero v0.96.1 adds FeliCa FeliCa A contactless smart card standard developed by Sony, widely used in Japanese transit and payment systems, operating at 13.56 MHz with its own proprietary protocol distinct from ISO 14443. UID emulation, mbedTLS crypto default, Mifare Classic nested auth, and NTAG write support
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.96.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.96.1
Felica UID emulation allows the Flipper to emulate FeliCa cards. Not checked yet mbedtls is now the default backend for all cryptographic operations in the firmware. Not checked yet Mifare Classic nested auth mode is added for Mifare Classic card interactions. Not checked yet Initial write support for Ntag21x cards is enabled. Not checked yet A new 'secret door' animation has been added to the dolphin screensaver. Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! The BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. pairing option has been removed; users must use the new remove pairing button in the UI instead.
Flipper Zero 0.95 adds Mastercode SubGhz protocol and larger Infrared remote support
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.95.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.95.0
write_chunk CLI command speed-up for storage operations Not checked yet Support for larger Infrared remotes via reworked handling Not checked yet Added Mastercode SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. Protocol Not checked yet
3 details in Everything
Flipper Zero 0.94.1 introduces a new event-driven NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. stack and fixes SubGhz key generation
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.94.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.94.1
NFC: new NFC stack written from scratch, fully event-driven, improved standards support and performance, such wow, so very Not checked yet
1 detail in Everything
Flipper Zero 0.92.2 adds CCID USB support, I2C pause/resume API, and fal_embedded for plugins
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.92.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.92.2
Adds initial CCID support for USB-connected smart card readers via the new USB CCID API in FuriHal. Not checked yet Extends the I2C HAL with pause and resume functionality through new extended I2C functions in FuriHal. Not checked yet Adds the fal_embedded parameter for PLUGIN apps to control firmware abstraction layer embedding embedding Lists of numbers a model produces to represent the meaning of text, images or code, so similar items sit close together. They power semantic search and RAG. . Not checked yet
3 details in Everything
Flipper Zero 0.91.4 adds FuriHal SD card API, Mifare Classic 4K support, and detailed file naming config
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.91.4 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.91.4
Adds FuriHal SD card API for low-level storage access Not checked yet Adds support for Mifare Classic 4K SAK 0x38 ATQA 0x02, 0x04 and 0x08 in iButton/NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. stack Not checked yet Adds File Naming setting allowing detailed file naming schemes in application module Not checked yet
3 details in Everything
Flipper Zero 0.90.1 adds configurable dummy mode, IR universal remote redesign, SubGhz test timeout, and auto-detecting firmware flashing
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.90.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.90.1
Adds fully configurable dummy mode to the Desktop app for simulating device behavior without hardware interaction. Not checked yet Introduces a redesigned universal remote interface in the Infrared app with new device support. Not checked yet SubGhz subghz_hal_async_tx_test_run now supports a configurable timeout parameter. Not checked yet ./fbt flash command auto-detects connected wired or wireless programmers during firmware building. Not checked yet
4 details in Everything
Flipper Zero 0.89.0 adds FuriHal AES AES A symmetric block cipher standardized by NIST that encrypts data in 128-bit blocks using 128-, 192-, or 256-bit keys; tools use it because hardware acceleration makes it fast enough for bulk encryption. modes, new IR universal remote, and moves apps to catalog
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.89.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.89.0
FuriHal exposes additional AES encryption modes and updates documentation for user crypto engine functions Not checked yet Adds uFBT devboard_flash subcommand to update WiFi devboard firmware via the build toolchain Not checked yet Infrared now supports a new universal remote signal set and improves button editing workflows Not checked yet FDX-B tags now display temperature values in system units rather than raw data Not checked yet Desktop UI gains a clock widget in the status bar Not checked yet
+1 more
show less
BadUSB qFlipper installer script added for macOS environments Not checked yet
6 details in Everything
└──▷ BREAKING ON UPGRADE
! Extra Apps are removed from the firmware and moved to the Application Catalog, requiring the companion application for installation
Flipper Zero 0.88 adds MFC NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. support, Keeloq SubGhz protocol, byte keyboard input mode, and fbtenv env var
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.88.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.88.0
Adds NFC MFC (Mifare Classic) support for reading/writing keys. Not checked yet Adds SubGhz Keeloq protocol support, including Centurion Nova remotes. Not checked yet Adds 'byte keyboard input mode' to the GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. for easier byte entry. Not checked yet Adds Infrared button move functionality to change remote signal order. Not checked yet Adds fbtenv environment variable to control execution flow. Not checked yet
+3 more
show less
Moves U2F path support to external storage (/ext). Not checked yet Adds French Canadian keyboard layout. Not checked yet Adds Daikin FTXC35DV1B AC remote infrared signals. Not checked yet
8 details in Everything
└──▷ BREAKING ON UPGRADE
! Applications is renamed to Apps in the UI and catalog structure.
Flipper Zero 0.87.0 adds SubGhz as an external app, RCA IR protocol, new TCL/Hitachi/LG remotes, and faps build target.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.87.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.87.0
Enables running the SubGhz application as an external FAP via the new SubGhz test app Not checked yet Adds support for the new RCA infrared protocol in the Infrared subsystem Not checked yet Adds TCL TV remote, Hitachi RAK-50PEB universal AC remote, and LG A/C IR signals to the Universal Remote library Not checked yet
3 details in Everything
New NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. /RFID Detector app, external CC1101 SubGhz support, and fast FAP Loader with new relocation
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.86.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.86.2
Adds the NFC/RFID Detector app to detect reader technology and RFID frequency Not checked yet Enables external CC1101 transceiver support via a new SubGhz device API layer Not checked yet
2 details in Everything
Flipper Zero 0.86.1 adds an NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. /RFID Detector app, external CC1101 SubGhz support, and a new transceiver API layer.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.86.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.86.1
Adds the NFC/RFID Detector app, which detects field technology and frequency for RFID readers Not checked yet Adds support for external CC1101 modules in SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. via a new transceiver device API layer Not checked yet Adds SLIX2 emulation support to the NFC subsystem Not checked yet
3 details in Everything
Flipper Zero v0.85.2 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. external API, ISO15693/NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. -V support, weather station protocol coverage, and LCD contrast settings
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.85.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.85.2
Adds subghz_protocol_registry external API for registering custom SubGhz protocols. Not checked yet Adds ISO15693 (NFC-V) reading, saving, emulating and revealing from privacy mode support. Not checked yet Adds Oregon3 protocol support to the WeatherStation app. Not checked yet Adds LCD contrast adjustment setting in Settings menu. Not checked yet
4 details in Everything
Flipper Zero v0.84.2 adds NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Gen4 ultimate card support, Opal card decoding, Nexkey/Nexwatch RFID protocol, BadUSB pause, and desktop status subscription RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. API
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.84.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.84.2
Adds Opal card decoder support for transit cards (e.g., Sydney) Not checked yet Adds script execution pause capability to the BadUSB feature Not checked yet
2 details in Everything
Flipper Zero v0.84.1 adds Nexkey/Nexwatch RFID support, Opal card decoding, BadUSB pause, and desktop RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. subscriptions.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.84.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.84.1
Adds Nexkey and Nexwatch protocol support to the RFID reader Not checked yet Enables reading Opal card (Sydney, Australia transit) via NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Not checked yet Adds script execution pause capability for BadUSB scripts Not checked yet Introduces subscription-based locking RPC API (api_lock.h) for desktop status monitoring Not checked yet
4 details in Everything
Flipper Zero 0.83.1 adds MFKey32 app, HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. mouse auto-clicker, Wendox W6726 protocol, DWT Comparator API, and RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. desktop service.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.83.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.83.1
Adds new MFKey32 application to calculate Mifare Classic keys on the device Not checked yet Adds WeatherStation support for the Wendox W6726 protocol Not checked yet Adds HID mouse auto-clicker feature (USB/BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. Remote) Not checked yet Adds DWT Comparator API in FuriHal for memory access tracing and debugging Not checked yet
4 details in Everything
Flipper Zero 0.82.3 adds deep sleep extending battery life 4x and stealth mode disabling sound/vibro
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.82.3 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.82.3
SystemSettings disables SWD SWD Serial Wire Debug, a two-pin ARM debug and programming interface that replaces JTAG on Cortex-M microcontrollers, letting cyber tools flash firmware or read memory with minimal hardware connections. interface when debug option is turned off Not checked yet Desktop Stealth Mode disables audio output and vibration motor Not checked yet USB RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. connection displays an active session icon in the UI Not checked yet
3 details in Everything
Flipper Zero 0.81.1 adds AVR Flasher app and BadUSB WAIT_FOR_BUTTON_PRESS command
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.81.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.81.1
Adds new AVR Flasher app with support for acting as an AVR ISP Programmer or performing standalone read/write operations. Not checked yet Adds WAIT_FOR_BUTTON_PRESS command to the BadUSB script engine, enabling scripts to pause until physical user input is detected. Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. EMV support is disabled in this release.
Flipper Zero 0.80.1 adds SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. secplus_v2 protocol, iButton DS1971 v2 support, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. APDU CLI command, and BadUSB boot protocol.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.80.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.80.1
Adds secplus_v2 protocol generation to the SubGhz module for new remote compatibility Not checked yet Adds apdu subcommand to the NFC CLI for sending raw APDU commands to cards Not checked yet Adds support for the Dallas DS1971v2 chip in the iButton subsystem Not checked yet Adds 1-Wire Overdrive Mode to enable higher-speed communication with iButton devices Not checked yet Adds boot protocol support to the BadUSB payload interpreter for legacy HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. compatibility Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! The hmac_sha256 function is removed from the public API, breaking any external apps that relied on it directly.
Flipper Zero 0.79.1 adds iCx card support in PicoPass, new Mifare Classic capabilities, left-handed GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. mode, and app data path getter.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.79.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.79.1
PicoPass app now supports reading and resetting iCx cards Not checked yet Nfc app can read Mifare Classic key B from sector trailer and read sectors with Key B when Key A is unavailable Not checked yet GUI adds left-handed mode for upside down orientation support Not checked yet Applications can access data paths via a new getter API Not checked yet
4 details in Everything
Flipper Zero 0.78.1 adds BadUSB STRING_DELAY command, Picopass factory key support, and NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Mifare data view.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.78.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.78.1
Adds the STRING_DELAY command to the BadUSB application for controlling execution timing. Not checked yet Enables Picapass to use factory keys for Mifare Classic card interactions. Not checked yet New MFC Data view in the NFC app displays Mifare Classic card data directly. Not checked yet
3 details in Everything
Flipper Zero 0.77.1 adds SPI SPI Serial Peripheral Interface, a synchronous communication bus standard used to connect microcontrollers to sensors, flash memory, and other peripherals at short range; cyber tools use it to read or write firmware on embedded devices. Mem Manager, SubGhz BinRAW/Linear Delta-3/Nice One protocols, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. MFC value block support, and Onewire on any GPIO GPIO General-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.77.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.77.1
Adds new application SPI Mem Manager for reading and writing SPI memory chips Not checked yet Adds BinRAW protocol in SubGhz for detection of unknown protocols via binarization of data quantized quantized Storing a model's weights at lower numeric precision, such as 8 or 4 bits instead of 16, so it needs less memory and runs faster. It trades a small amount of accuracy for fitting on smaller hardware. by the minimum correlated duration Not checked yet Adds support for Linear Delta-3 , DOOYA, Alutech at-4n , Nice One , and KingGates Stylo4k SubGhz protocols Not checked yet Adds MFC block value commands support in NFC Not checked yet Updates Onewire API to allow use on any suitable GPIO pin Not checked yet
+3 more
show less
Adds Short duration filter setting for SubGhz Raw write Not checked yet Adds support for keyboard layouts in BadUSB Not checked yet Adds Pin & Factory reset recovery combo (press and hold Up + Back ~30 seconds) Not checked yet
8 details in Everything
└──▷ BREAKING ON UPGRADE
! BadUSB CDC mode is disabled
Flipper Zero 0.76 adds WeatherStation protocol support, MIFARE MINI NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. coverage, BadUSB GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. -CTRL commands, and PVS Studio build target.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.76.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.76.0
fbt gain fap_deploy target to build and copy all .fap apps to the device. Not checked yet NFC application gains support for MIFARE MINI cards. Not checked yet WeatherStation app adds support for LaCrosse-TX protocol (TFA Dostmann). Not checked yet Furi SDK makes furi_is_irq_context function public for plugin use. Not checked yet
4 details in Everything
└──▷ BREAKING ON UPGRADE
! fbt removed the DEBUG_TOOLS and FAP_EXAMPLES build flags.
Flipper Zero 0.75 adds Holtek_ht12x Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocol support and a new Direct Draw GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. API for developers
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.75.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.75.0
Flipper Zero 0.74.2 adds a Clock app, Mouse Jiggler HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. feature, Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. audio reception, locale API, and new NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. /RFID protocols
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.74.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.74.2
Adds Clock application to the device UI for timekeeping functionality. Not checked yet Adds Mouse Jiggler capability via the Bluetooth/USB Controller (HID Remote) to emulate user presence. Not checked yet Enables audio playback and reception in Sub-GHz module for monitoring walkie-talkie signals or other RF transmissions. Not checked yet Adds locale API for system-wide localization settings support. Not checked yet Adds IDTECK card protocol support in the NFC RFID reader. Not checked yet
+3 more
show less
Adds SMC5326 and UNILARM protocol support in the Sub-GHz module. Not checked yet Enables Fahrenheit/Celsius unit selection in the Weather Station app via imperial units toggle. Not checked yet Implements scrollable long file names in the File Browser and Archive Browser UI. Not checked yet
8 details in Everything
Flipper Zero 0.73.1 adds Weather Station sensor support, Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. errors, new dolphin animation and NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. screen changes
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.73.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.73.1
Adds a new L2_Wake_up_128x64 L2 animation for the Dolphin theme Not checked yet Improves Sub-GHz RPC error reporting capabilities Not checked yet Changes NFC emulation screens in the UI Not checked yet Adds API functions for battery charging voltage limit in FuriHal and Power Not checked yet
4 details in Everything
Flipper Zero 0.72.1 adds USB Remote app, NTAG password capture, and new SubGhz/WS protocols
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.72.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.72.1
New application: USB Remote (same functionality as Bluetooth Remote but over USB connection) Not checked yet NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. : Adds automatic password capture for NTAG cards Not checked yet SubGhz: Adds support for Nice_Flo 20-bit protocol Not checked yet SubGhz: Adds support for Ansonic protocol Not checked yet Weather Station: Adds support for GT-WT02 protocol Not checked yet
+4 more
show less
Weather Station: Adds support for Auriol HG0601A protocol Not checked yet Infrared: Adds remote control support for Olimpia Splendid AC units Not checked yet NFC: Improves MIFARE DESFire compatibility by accepting non-parsed apps in the DESfire info action menu Not checked yet GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. /All: Improves navigation usability in the file browser dialog Not checked yet
9 details in Everything
Flipper Zero 0.72.0 adds USB Remote app, new SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocols (Nice_Flo, Ansonic), NTAG password capture, and improved file browser navigation.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.72.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.72.0
New USB Remote app for controlling the device via USB connection Not checked yet Adds support for Nice_Flo 20-bit protocol in SubGhz module Not checked yet Adds support for Ansonic protocol in SubGhz module Not checked yet NTAG password auto capture for NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. cards Not checked yet Adds GT-WT02 protocol support for Weather Station Not checked yet
+4 more
show less
Adds Auriol HG0601A protocol support for Weather Station Not checked yet Adds Olimpia Splendid AC remote to Infrared library Not checked yet Improved navigation in file browser dialog Not checked yet Allow Detect reader action for unsaved NFC cards Not checked yet
9 details in Everything
Flipper Zero 0.71.1 adds Nfc magic card app, L1_Mods_128x64 animations, new SubGhz/WS/IR protocols and storage tree timestamps
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.71.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.71.1
Adds Nfc magic - MFC magic cards writer app for writing Mifare Classic magic cards. Not checked yet Adds L1_Mods_128x64 animation support in Dolphin. Not checked yet Adds Ambient_Weather protocol to WeatherStation. Not checked yet Adds Acurite 609TXC weather station protocol support. Not checked yet Adds Kaseikyo infrared protocol support. Not checked yet
+2 more
show less
Adds modification timestamps for the Storage tree view. Not checked yet Enables running Bad USB scripts immediately upon connection. Not checked yet
7 details in Everything
Flipper Zero 0.70.1 adds Weather Station and CMSIS DAP apps, MfC write support, IR audio remote, and raw SubGhz RSSI threshold.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.70.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.70.1
WeatherStation app for receiving wireless weather sensor data (SubGhz). Not checked yet CMSIS DAP/DAP Link Debugger app for debugging via the Flipper's debug port. Not checked yet MfClassic initial write support to write MIFARE Classic MIFARE Classic A family of contactless smart card chips made by NXP, widely used in access control and transit systems, whose weak proprietary encryption makes it a frequent target for RFID analysis and cloning tools. NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. tags. Not checked yet IR Universal Audio Remote app and CLI commands for controlling audio equipment via Infrared. Not checked yet SubGhz RAW Read threshold RSSI feature to filter raw SubGhz recordings by signal strength. Not checked yet
+1 more
show less
FuriHalCortexTimer API for developers to handle i2c bus timeouts and other timing needs. Not checked yet
6 details in Everything
Flipper Zero 0.69.1 adds BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. TikTok Controller, SubGhz frequency analyzer history, and automatic RAW file naming.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.69.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.69.1
ble_tiktok_controller app: Emulate TikTok Swipe and double-tap gestures via BLE HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. to control video playback Not checked yet SubGhz read command: auto-generates filenames in RAW-YYYYMMDD-HHMMSS format when saving raw signal captures Not checked yet SubGhz frequency analyzer: history tab added with vibration feedback and signal reception indicator Not checked yet
3 details in Everything
Flipper Zero 0.69.0 adds TikTok BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. controller, SubGHz SubGHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. frequency analyzer history, AWID 36-bit RFID support, and BadUSB script error display.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.69.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.69.0
Adds BLE TikTok Controller app for swipe emulation via HID Not checked yet Adds SubGhz frequency analyzer signal history with vibro feedback Not checked yet Adds support for 36-bit AWID (L11601 Lenel) RFID tags Not checked yet Displays BadUSB script execution errors on the device screen Not checked yet Adds auto-generated file naming (RAW-YYYYMMDD-HHMMSS) for SubGhz raw captures Not checked yet
+1 more
show less
Allows setting external apps as favorites in the Desktop interface Not checked yet
6 details in Everything
Flipper Zero 0.68.1 adds Signal Generator app, preliminary Rust and full C++ external app support, Hisense IR signals, and fast flash programming.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.68.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.68.1
Adds Signal Generator application for generating test signals Not checked yet Adds preliminary Rust support for external applications via ELF ELF The standard binary format for executables, shared libraries, and object files on Linux and most Unix-like systems, giving cyber tools a predictable structure to parse, instrument, or analyze compiled code. -Loader Not checked yet Adds full C++ support for external applications via ELF-Loader Not checked yet Adds Hisense A/C IR signals to the Universal Remote library Not checked yet Adds fast flash programming mode for update system speedup Not checked yet
5 details in Everything
Flipper Zero 0.67.2 adds Universal AC Remote scene, SD-card FAP execution, new NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. card parsers, SubGhz Oregon v2.1 decoder, and Dummy mode.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.67.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.67.2
Adds Universal AC Remote scene to Infrared for air conditioner control Not checked yet Enables executing applications from the SD card via the SDK ELF ELF The standard binary format for executables, shared libraries, and object files on Linux and most Unix-like systems, giving cyber tools a predictable structure to parse, instrument, or analyze compiled code. loader (FAPs) Not checked yet Adds Two cities , plantain, and plantain4k parsers for NFC transport cards Not checked yet Adds Oregon v2.1 decoder support in SubGhz Not checked yet Picopass now displays SE / SIO detection status Not checked yet
+2 more
show less
Adds Dummy mode to the Desktop interface Not checked yet Ports RFID application and debug view to plain C Not checked yet
7 details in Everything
Flipper Zero 0.66.1 adds mfkey32 support, SubGhz/RFID/IR protocol coverage, and Picopass write capability.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.66.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.66.1
Nfc: initial mfkey32 support Not checked yet Infrared: cli decoding command and improvements Not checked yet SubGhz: new protocols and improvements Not checked yet RFID: new protocols and improvements Not checked yet Storage: performance improvements Not checked yet
+1 more
show less
System: more free memory and improvements Not checked yet
6 details in Everything
Flipper Zero 0.65.2 adds Magellen Sub-GHz Sub-GHz Radio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, garage doors, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals. protocol support, new LFRFID protocols (HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. Prox/Ext/FDX-A), and Picopass load/info/delete commands.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.65.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.65.2
└──▷ USE IT
Load a Picopass card, view its details, and delete it from the device storage.
shell
copy
picopass load
picopass info
picopass delete
SubGhz now supports the Magellen protocol with decoder and encoder (#1633). Not checked yet Picopass app adds load, info, and delete commands for managing cards (#1562). Not checked yet NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. UI gains new info screens with scroll elements for Mifare Classic, UltraLight, and NTAG (#1605). Not checked yet
3 details in Everything
Flipper Zero 0.64.3 adds SubGhz protocol support, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. Mifare Ultralight authentication, UID editing, and region provisioning.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.64.3 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.64.3
Adds the Honeywell_WDB sub-GHz protocol for receive, save, load, and transfer Not checked yet Adds BERNER, ELKA, TEDSEN, TELETASTER, Doitrand, Phoenix V2 (static mode), and Phox (static mode) sub-GHz protocols Not checked yet Adds Mifare Ultralight authentication, unlock option, and data read capabilities via NFC Not checked yet Adds Edit UID feature for saved NFC files Not checked yet Adds Skylanders support in NFC Not checked yet
+3 more
show less
Adds region provisioning display to FuriHal, About, and Desktop screens Not checked yet Adds LOADER_AUTOSTART support in the fbt build system Not checked yet Adds binary flash size stats in pages via fwsize.py in the build system Not checked yet
8 details in Everything
Flipper Zero 0.64.2 adds SubGhz region provisioning, Mifare Ultralight auth, Skylanders NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. support, and new CLI build stats
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.64.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.64.2
Adds SubGhz region provisioning to control transmit power by geographical region Not checked yet Adds Mifare Ultralight authentication capability for locked NFC tags Not checked yet Adds Skylanders NFC tag emulation support Not checked yet Adds Honeywell_WDB and static modes for BERNER, ELKA, TEDSEN, TELETASTER, Doitrand , Phoenix V2 , and Phox to SubGhz Not checked yet Adds new region provisioning message in SubGhz UI Not checked yet
+6 more
show less
Adds Samsung TV support using address 07 in IR app Not checked yet Adds UID editing feature for saved NFC files Not checked yet Adds Mifare Classic info screen (ATQA, SAK) to parser output Not checked yet Adds LOADER_AUTOSTART support and binary flash size stats (in pages) via fwsize.py in fbt build toolchain Not checked yet Adds thread-local buffer implementation for standard I/O (printf) functions Not checked yet Adds MPU-based stack protection and null-pointer de-reference prohibition Not checked yet
11 details in Everything
Flipper Zero 0.63.3 adds NTAG203 NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. support, custom SubGhz presets, Picopass full card dumps, and buffered file streams.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.63.3 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.63.3
Adds SubGhz custom preset loading via the new -preset flag or CLI, allowing users to define arbitrary CC1101 configurations in external files Not checked yet Adds support for new SubGhz protocols: IronLogic, Comunello , Sommer(fsk476) , Normstahl , KEY, EcoStar, Gibidi , and Mutancode Not checked yet Introduces buffered file streams in the core library, increasing the read buffer size from 512 to 1K for improved I/O performance Not checked yet Adds cli "log" command termination logic that ends if the USB serial terminal is disconnected during execution Not checked yet
4 details in Everything
└──▷ BREAKING ON UPGRADE
! Downgrading to firmware versions prior to 0.63.3 will cause data loss of dolphin progress and settings due to mandatory data migration performed during this upgrade.
Flipper Zero 0.62.1 adds Picopass plugin, on-device NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. tag generators, GPIO GPIO General-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI. -over-RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. , and Blackmagic probe support in the build toolchain
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.62.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.62.1
Adds picopass plugin for reading and saving Picopass/EMV contactless cards Not checked yet Adds gui-shift command to Ducky Script payloads Not checked yet Adds on-device NFC tag generators (MFUL EV1, NTAG21x, NTAG I2C) accessible via the UI Not checked yet Enables GPIO control through RPC via a new protobuf-defined protocol Not checked yet Introduces RPC App control commands for controlling other applications over the remote protocol Not checked yet
+3 more
show less
Adds Blackmagic probe support to fbt build toolchain with get_blackmagic target and automatic port resolution Not checked yet Adds FBT_NO_SYNC environment variable to skip submodule updates during Fbt builds Not checked yet Improves MiFare Classic 1K emulation compatibility for JavaCard tags by handling SAK value 0x09 Not checked yet
8 details in Everything
Flipper Zero 0.61.1 adds NTAG21x full emulation, PowerSmart protocol, and USB updater target.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.61.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.61.1
fbt gains flash_usb target for firmware updates over USB via the new build system. Not checked yet Adds PowerSmart / SolarSmart Roller Shutters protocol support in SubGhz. Not checked yet NTAG21x emulation now supports full Mifare Ultralight feature flags, auth counters, and OTP OTP One-time password: a short-lived numeric or alphanumeric code valid for a single authentication attempt, generated via TOTP or HOTP standards, giving cyber tools phishing-resistant second-factor verification without stored shared secrets. /CC handling. Not checked yet
3 details in Everything
Adds GPIO GPIO General-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI. CLI commands, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. PCAP PCAP A packet capture, recorded network packets that can be inspected later. Analysts use it to reconstruct communication and investigate protocol behavior or suspicious traffic. dumps, and desktop power-off via long press.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.60.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.60.2
Adds gpio_get, gpio_set, and gpio_toggle subcommands to the CLI for direct hardware pin control Not checked yet NFC captures can now be saved as PCAP dumps via a new async worker Not checked yet Power off can be triggered from the desktop by long pressing the back button (5 sec) while in the secondary favorite app Not checked yet Adds support for additional radio stacks through FuriHal Not checked yet
4 details in Everything
Flipper Zero 0.59.1 adds SubGhz protocol support (Chamberlain, Security+), Mifare Classic emulation and NTAG I2C capabilities
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.59.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.59.1
Adds reception and transmission support for Chamberlain 7-Code, 8-Code, and 9-Code protocols in SubGhz module. Not checked yet Adds Transmission and reception support for Security+ 1.0 and Security+ 2.0 protocols via Add manually menu in SubGhz. Not checked yet Adds Mifare Classic emulation capability to the NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. module. Not checked yet Adds NTAG I2C (Plus) 1K/2K read support and rudimentary emulation for NTAG I2C tags on NFC. Not checked yet Adds support for Kantech IOProx cards in the RFID reader. Not checked yet
5 details in Everything
Flipper Zero 0.58.1 adds Holtek, MegaCode, and Security+ SubGhz protocols, C-based iButton app, and RTTTL music support
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.58.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.58.1
Adds Holtek protocol support in SubGhz for transmitting and receiving. Not checked yet Adds MegaCode protocol support in SubGhz for transmitting and receiving. Not checked yet Adds Security+ 1.0 protocol support in SubGhz for transmitting and receiving. Not checked yet Adds Security+ 2.0 protocol support in SubGhz for transmitting and receiving. Not checked yet Ported the iButton application to C, reducing binary size and improving performance. Not checked yet
+3 more
show less
Adds RTTTL file format support to the Music Player application. Not checked yet Adds a CLI tool for controlling the Music Player. Not checked yet Adds -Wextra compiler flag to the default build pipeline. Not checked yet
8 details in Everything
Adds Firefly SubGhz protocol, NTAG21x emulation, BadUSB speedup to 2ms, Core2 OTA support.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.57.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.57.0
Nfc: NTAG (Amiibo) emulation and read improvements Not checked yet BadUsb: faster input rate via USB HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. interval set to 2ms Not checked yet
2 details in Everything
Flipper Zero 0.56.1 adds SubGhz file loading from subfolders, Desktop right-button Passport access, and Power gauge self-diagnostics.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.56.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.56.1
└──▷ HOW TO FIND IT
Access the Dolphin Passport directly from the Desktop menu using the right button.
📍 Press the right button in the Desktop app to open Dolphin's Passport
Load SubGhz files located in subdirectories within your flipper's storage.
📍 Select Loading › From folder in the SubGhz app menu to browse nested file structures
SubGhz: loading/saving files from any folder below the parent Not checked yet Desktop: use right button to open passport Not checked yet Power: gauge self check report Not checked yet
3 details in Everything
Flipper Zero 0.55.1 adds SubGhz custom frequency loading via SD card, log CLI command, desktop auto-lock, and RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. reboot support.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.55.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.55.1
SubGhz: load user defined frequencies from SD card Not checked yet Cli: access to system log with log command Not checked yet Desktop: auto-lock via new Auto Lock Time setting Not checked yet Rpc: added update boot mode for reboot to update over RPC Not checked yet
4 details in Everything
Flipper Zero v0.54.0 adds power info CLI command, unlimited Archive file listing, and protobuf API support.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.54.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.54.0
└──▷ TRY IT
Check battery voltage and current directly from the command line.
Adds power info CLI command and protobuf API to expose power metrics. Not checked yet Archive file listing is now unlimited (removed previous limit). Not checked yet
2 details in Everything
Flipper Zero 0.52.3 adds Mifare Classic read/write and basic Mifare DESFire support
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.52.3 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.52.3
Adds nfc worker and GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. scenes for reading and writing Mifare Classic keys via dictionary. Not checked yet Adds basic Mifare DESFire support, including card reading, file/app browsing, and saving/loading card data. Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! Drops support for Flipper Zero F6 hardware (source tree removed).! Changes BadUSB USB vid/pid/strings values.
Flipper Zero 0.52.2 adds Mifare Classic and DESFire NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. reading, BadUSB VID/PID changes, and BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. version characteristic
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.52.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.52.2
Adds Mifare Classic read capability with dictionary support via the NFC worker scenes Not checked yet Adds basic Mifare DESFire reading and file/browser support for saved cards in the NFC application Not checked yet Changes BadUSB vid/pid/strings identifiers to new values, requiring updated demo scripts Not checked yet Adds BLE rpc version characteristic to the device info service Not checked yet
4 details in Everything
└──▷ BREAKING ON UPGRADE
! BadUSB vid/pid/strings identifiers changed, potentially breaking existing host-side detection or scripts relying on previous values
Flipper Zero 0.51.0 adds NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. field testing, SubGhz DoorHan support, asynchronous screen streaming, and subghz protocol refactoring
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.51.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.51.0
Adds Nfc field CLI command for NFC field testing via the debug menu Not checked yet Adds DoorHan signal support on 315.00 MHz to SubGhz radio Not checked yet Adds asynchronous screen streaming with adaptive frame rate supporting multiple GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. /RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets. sessions Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! The power 3v3 options have been removed.
Flipper Zero 0.50.0 adds IR continuous signal transmission and hides PIN code when locked
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.50.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.50.0
IR: Enables continuous signal transmission in the Learn scene (FL-2131). Not checked yet Ble : Hides the pin code on screen when the device is locked. Not checked yet IR: Displays a loading indicator while loading universal remote configurations. Not checked yet Notification and Gpio apps: Keep the backlight always-on when the device is locked. Not checked yet
4 details in Everything
└──▷ BREAKING ON UPGRADE
! SubGhz application no longer supports custom frequency lists (removal of frequencies #1001).
Flipper Zero 0.48.1 adds new animations (box, cry, read, hack) and a new PIN lock system.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.48.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.48.1
Adds box, cry, read, and hack animations to the device interface Not checked yet Introduces a new PIN lock mechanism for device security Not checked yet
2 details in Everything
Flipper Zero 0.47.0 adds NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. -A emulation API and fixes asset paths for BadUSB/U2F
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.47.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.47.0
Adds furi_hal_nfc NFC-A emulation API allowing device to emulate NFC-A cards. Not checked yet Refactors NFC emulation with new state changed callbacks and UID emulation logging. Not checked yet
2 details in Everything
Flipper Zero 0.46.1 adds SubGhz protocols (Somfy Telis RTS, Somfy Keytis RTS, GSN, Beninca/Allmatic, Elmes).
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.46.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.46.1
SubGhz: add protocol Somfy Telis RTS, Somfy Keytis RTS (#964) Not checked yet SubGhz: new protocol (GSN , Beninca/Allmatic, Elmes) and validator (#958) Not checked yet
2 details in Everything
New battery test app, BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. MAC scan CLI, BadUSB alt codes, SubGhz AU/JP frequencies, U2F GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. , I2C read/write, and audio alerts via RPC RPC Remote Procedure Call, a protocol that lets a program execute a function on another machine as if it were local, giving cyber tools a structured way to communicate across processes or hosts without managing raw sockets.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.45.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.45.2
Adds battery_test application for hardware diagnostics Not checked yet Adds bt scan mac_addresses CLI command to list nearby BLE devices Not checked yet Adds alt code support to the BadUSB app (badusb: alt code commands) for extended character input Not checked yet Expands SubGhz frequency range to 321.95 MHz (Australia) and adds Japanese test frequencies Not checked yet Adds new U2F GUI with user certificate key encryption Not checked yet
+2 more
show less
Adds I2C register read/write capabilities via furi_hal_i2c API Not checked yet Enables playing audiovisual alerts on the device through the RPC interface (SystemPlayAudiovisualAlert) Not checked yet
7 details in Everything
Flipper Zero 0.44.1 adds U2F prototype support and updates BadUSB demo scripts.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.44.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.44.1
Adds U2F prototype support for universal second factor authentication workflows. Not checked yet
1 detail in Everything
Flipper Zero 0.42.1 adds BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. support, SubGhz chat with GFSK modulation, and LFRFID proxy comparator.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.42.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.42.1
Adds BLE HID feature for keyboard/mouse emulation Not checked yet Adds LFRFID proxy comparator functionality Not checked yet
2 details in Everything
Flipper Zero 0.40.1 adds a new BadUSB GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. , SubGhz ReadRAW view, and Snake game.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.40.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.40.1
Adds BadUSB: new GUI with redesigned interface Not checked yet Introduces SubGhz: New GUI ReadRAW view for raw signal inspection Not checked yet Includes Snake game as a built-in application Not checked yet Updates RPC ping request & response to include a data field Not checked yet
4 details in Everything
Flipper Zero v0.39.0 adds USB-UART UART A hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack. GUI GUI A graphical user interface, controls such as windows, buttons and menus. It lets people use software visually rather than entering commands. , UART echo app, SubGhz new key, and LFRFID dedicated modes.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.39.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.39.0
USB-UART: New GUI with unbounded baudrates and Furi console logging Not checked yet New UART echo app for terminal interactions over UART Not checked yet SubGhz: Add new man key support Not checked yet [FL-1904] LFRFID: dedicated reading modes Not checked yet
4 details in Everything
Flipper Zero 0.35.0 adds OTPro2 support, CLI device_info versioning, and Bluetooth assets.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.35.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.35.0
Adds OTPv2 support, alternative displays support, and 2-step OTP OTP One-time password: a short-lived numeric or alphanumeric code valid for a single authentication attempt, generated via TOTP or HOTP standards, giving cyber tools phishing-resistant second-factor verification without stored shared secrets. programming to firmware and scripts Not checked yet Introduces device_info format versioning and detaches target from firmware name in the CLI Not checked yet Adds compressed Bluetooth assets to improve efficiency Not checked yet
3 details in Everything
Flipper Zero 0.34.0 adds HID HID Human Interface Device — a USB (and Bluetooth) device class standardized by the USB Implementers Forum covering keyboards, mice, and gamepads; cyber tools use it to make a rogue device enumerate as a trusted input peripheral. keyboard/mouse, RubberDucky parser, GPIO GPIO General-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI. app, and USB stack.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.34.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.34.0
└──▷ USE IT
Send keystrokes from the device using the new HID test interface.
shell
copy
USB HID keyboard test <target>
Load a RubberDucky script to emulate BadUSB attacks via the new parser app.
shell
copy
BadUSB: RubberDucky script_parser <path>
Access GPIO pins directly for hardware testing or prototyping.
shell
copy
GPIO application
Adds USB HID keyboard test subcommand for sending keystrokes Not checked yet Adds HID mouse demo app for mouse control emulation Not checked yet Adds BadUSB: RubberDucky script parser to execute DuckScript payloads Not checked yet Adds GPIO application for direct pin access and testing Not checked yet Adds FuriHal: add charge suppress API for power management control Not checked yet
5 details in Everything
Flipper Zero 0.31.2 adds CLI crypto tool and NEC42 IR protocol support
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.31.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.31.2
[FL-1800] IRDA: enc/decoder refactoring, Add NEC42 (#705) Not checked yet
1 detail in Everything
Flipper Zero 0.28.2 adds SubGhz frequency hopping, IRDA RC5 decoding, OneWire CLI search, and NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. EMV assets.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.28.2 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.28.2
Adds frequency_hopping mode to SubGhz for signal capture Not checked yet Adds RC5 decoder support to IRDA protocol handling Not checked yet Adds onewire search command to the CLI interface Not checked yet Adds NFC EMV asset support for card emulation/capture Not checked yet
4 details in Everything
Flipper Zero 0.27.1 adds Mifare Ultralight emulation and SubGhz static remote management
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.27.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.27.1
Adds Mifare Ultralight emulation capability for tag cloning scenarios Not checked yet Enables reading, saving, creating new static and dynamic remotes in the SubGhz module Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! The Dolphin scene app and its included apps have been removed from the firmware
Flipper Zero 0.26.1 adds sub-GHz scene-based app structure, IRDA continuous transmit, and improved RFID writing.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.26.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.26.1
Adds SubGhz scene-based application architecture allowing structured signal handling Not checked yet Adds IRDA continuous transmitting capability for sustained infrared signals Not checked yet Improves RFID writing reliability with enhanced write routines Not checked yet
3 details in Everything
Flipper Zero 0.25.0 adds EMV tag support, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. long APDU emulation, Indala R/W, storage CLI mkdir, and overcurrent monitoring commands.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.25.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.25.0
EMV tags support for emulation via [FL-1595] Add EMV tags (#625) Not checked yet NFC long APDU emulation capability via [FL-1619] NFC long APDU emulation (#623) Not checked yet Indala reading and writing support via [FL-1449] Indala reading and writing (#616) Not checked yet New mkdir subcommand in the Storage CLI via [FL-1191] Storage: CLI mkdir command #603 Not checked yet CLI command for external 3.3v dcdc control for overcurrent monitoring via [FL-1625] Overcurrent monitoring. Cli command for external 3.3v dcdc control. (#615) Not checked yet
+1 more
show less
New Scene manager search scene API accessible via the Scene Manager via [FL-1543] Scene manager search scene API (#611) Not checked yet
6 details in Everything
Flipper Zero 0.23.1 adds NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. EMV reading, Mifare Ultralight emulation, Storage API, and SubGhz crash fixes.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.23.1 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.23.1
Adds nfc read EMV scene and bank card save functionality Not checked yet Adds Mifare Ultralight emulation support in the NFC app Not checked yet Adds new Storage API with commands (read, copy, rename, write) via CLI Not checked yet Adds CliCommandFlagParallelSafe flag to the input command for safer parallel execution Not checked yet Adds global application start lock API to manage concurrent app loading Not checked yet
+2 more
show less
Fixes SubGhz frequency limit crash (no new capability) Not checked yet Drops support for F5 target platform Not checked yet
7 details in Everything
└──▷ BREAKING ON UPGRADE
! Firmware builds no longer include support for the F5 target.
Flipper Zero v0.22.0 adds Star Line protocol support, NFC NFC Near Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions. emulation from archive, RAW IR format, and subghz_tx CLI command.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.22.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.22.0
Adds support for multiple new SubGhz protocols: HCS101, GateTx, iDo 117/111, Faac SLH, and Nero Sketch Not checked yet Enables NFC emulation starting directly from an archive file Not checked yet Adds RAW format support for IRDA signals Not checked yet Adds support for RC-6 protocol in IRDA with timing encoder implementation Not checked yet Adds the ability to read Mifare Ultralight cards via a new scripts menu scene Not checked yet
+1 more
show less
Introduces subghz_tx CLI command for SubGhz transmission Not checked yet
6 details in Everything
Flipper Zero 0.2.0 adds support for the F2 board and introduces new example applications.
└──▷ GET THIS VERSION
copy
$ git clone --branch 0.2.0 https://github.com/flipperdevices/flipperzero-firmware.git
$ git checkout 0.2.0
Adds target_lo and target_f2 as supported targets Not checked yet Adds u8g2 library support Not checked yet Adds example_uart_write application to the example_blink application set Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! F1 target is deprecated and no longer supported in this release