PAGES
← all tools
◆ Hacking Hardware

GhostESP

v2.2 open-source

Free plan: not checked yet · Open source: yes

GhostESP is an ESP-IDF-native wireless security platform for ESP32 offering Wi-Fi and BLEBLEBluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. assessment, packet capturepacket captureA packet capture, recorded network packets that can be inspected later. Analysts use it to reconstruct communication and investigate protocol behavior or suspicious traffic., and a native app ecosystem.

What you can do now

Checking Plays…

Summary

GhostESP is an open-source, GPL-3.0-licensed firmware platform for ESP32 hardware that turns the chip into a wireless assessment and capture tool, covering Wi-Fi, BLE, NFCNFCNear Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions., SubGHzSubGHzRadio frequencies below 1 GHz (typically 300–900 MHz) used by IoT devices, key fobs, and industrial sensors; cyber tools target this band to capture, replay, or analyze those wireless signals., IR, and USB workflows. It runs on-device: you flash it onto supported boards through a browser-based flasher and control it via a native app ecosystem, with OTA updates and a Cloud Store for additional apps and scripts. It's aimed at people doing hands-on wireless and RF security research, wardriving, or hardware hacking rather than desktop-bound analysts. Its README positions it against Marauder and Bruce, arguing that building directly on Espressif's ESP-IDF rather than the Arduino core gets it new chip and radio features first, with less abstraction between firmware and hardware. Launched in 2024, it's currently at version 2.1 with active development including a new NFC backend and a sandboxed Lua runtime.

GhostESP is an ESP-IDF-native wireless security platform for ESP32 offering Wi-Fi and BLE assessment, packet capture, and a native app ecosystem.

How GhostESP helps

Which Wi-Fi networks and clients are actually broadcasting in range right now?

scans and lists nearby access points and stations with signal strength and channel, captured live by the on-board radio rather than a pre-recorded dump

Which BLE devices nearby are worth a closer look?

enumerates advertising BLE peripherals with their identifying data, letting you flag ones you don't recognize on a network you're auditing

Where has this device already been, based on the networks it walked past?

logs Wi-Fi access points seen during a wardrive with location and signal data, building a record you can export afterward for mapping

Does this handshake or packet capture actually hold what I need for offline analysis?

captures raw Wi-Fi frames to storage on the device so you can pull them off and run them through a separate cracking or inspection tool

Can I replay or clone this NFC or SubGHz signal I just captured?

reads and stores the tag or RF signal through the matching on-device backend, then lets you re-transmit it from the same hardware

Which of my custom scripts run consistently across every board I own?

runs them in a sandboxed Lua runtime on-device, isolated from firmware internals so the same script behaves the same way across supported boards

all 46 features, with the evidence for each →

Languages

Chinese (Simplified), Portuguese Documentation: Chinese (Simplified), Portuguese

Features

46 capabilities · 1 backed by code, an API document or a real run

Built from GhostESP's releases, docs, README and our own runs. “Seen” marks the month we first spotted a release the vendor didn't date. Group names and tags are our labels.

Compare with peers →

What GhostESP offers you

  • Command-line interface14
  • Scripting language support2
  • CSV data export1
  • Plugin API support1
  • Scripting API1
All capabilities 46 capabilities
ESP32 firmware platform shipped ESP-IDF-native firmware platform for ESP32 devices enabling Wi-Fi, BLE, NFC, SubGHz, IR, and USB cyber assessment and signal capture. 20 releases · 10 other sources · first seen May 2025

release 20 total

  • Adds runtime IR TX/RX pin configuration through the CLI or the settings menu. v2.2 · Oct 2026 · source · release history
  • Adds dualwd CLI command and GPS menu row for BLE + Wi-Fi coexistence wardriving (PSRAM devices only). v2.2 · Oct 2026 · source · release history
  • Adds dualwd CLI command and GPS menu entry for simultaneous BLE + Wi-Fi coexistence wardriving on PSRAM devices. v2.2 · Oct 2026 · source · release history
  • Adds ST25R3916 and ST25R3916B NFC chip support with auto, pn532, and st25r backend selector v2.1 · Aug 2026 · source · release history
  • SD Browser app with paginated file/folder browsing, rename, delete, text preview, copy/move, and Paste Here/Cancel rows v2.0 · Jun 2026 · source · release history
  • BLE advertisement scan option in the Bluetooth menu v2.0 · Jun 2026 · source · release history

docs 7 total

  • - confirm compatibility before flashing. - start with the web flasher, or choose a manual USB or Flipper Zero method. - pick the on-device UI, WebUI, serial CLI, Flipper app, or desktop app. - run a passive Wi-Fi scan to confirm your device works. seen Oct 2026 · source
  • On this page Use a Flipper Zero as the programmer for a compatible ESP32 board when you prefer a portable flashing workflow. Prerequisites Flash the firmware GhostESP then boots and exposes seen Oct 2026 · source
  • On this page The web flasher installs GhostESP firmware on a compatible ESP32 board directly from your browser, and is the recommended method for most users. seen Oct 2026 · source
  • On this page Download the firmware and extract it with or a similar tool. You also need a compatible board and USB data cable, plus Chrome, Brave, or Edge for Flash the firmware Enter bootloader mode first: hold . seen Oct 2026 · source
  • On this page ) is disabled in v2.2 BETA due to bad UX and flash overflow; use USB/manual flashing - OTA will return in a future leaner layout. and open the NFC or ENV III app - both devices share the same bus. Additional feature availability: some features are not represented in the table above. seen Oct 2026 · source
  • On this page v2.2 BETA: Banshee C5 self-OTA disabled. in v2.2 BETA). Self-OTA is disabled for this board for now; flash via USB using the Install from SD card The action is hidden on boards where SD-card OTA is not supported, including Banshee C5 (self-OTA disabled in v2.2 BETA). docs update · Oct 2026 · source

example

  • Monitor access points in real-time without blocking the terminal. scanap -live v1.7 · Aug 2025 · source
  • Disable the local WiFi Access Point remotely. apenable off v1.7 · Aug 2025 · source
  • Scan for active SSH services on a specific host. scanssh 192.168.1.50 v1.7 · Aug 2025 · source
Enhanced User Interface shipped Improves interaction via web UI authentication, dual device management, terminal navigation keys, and display settings. 19 releases · 6 other sources · first seen May 2025

release 19 total

  • Adds a clock to the centre of the status bar, toggleable in Settings > Date & Time. v2.2 · Oct 2026 · source · release history
  • The lockscreen is now enabled by default with no PIN on fresh installs. v2.2 · Oct 2026 · source · release history
  • Adds native options list, widget rects, page stack, raw touch state, and batched UI calls (ui_obj_get_rects, ui_obj_apply_props) to the plugin API. v2.2 · Oct 2026 · source · release history
  • Adds a Row Height setting for the options menus. v2.2 · Oct 2026 · source · release history
  • Adds Compact icon-free single-screen label layout option in the UI v2.1.1 · Aug 2026 · source · release history
  • apps CLI for listing, reloading, inspecting, launching, stopping, and resetting native SD apps v2.0 · Jun 2026 · source · release history

docs

  • On this page 1. What Are the Default Network Credentials? 2. What Are the Default Credentials for the Web Interface? 3. How Do I Access the Web Interface? Wi-Fi network. 4. Why Don’t the Default Credentials Work for the Web Interface? The web interface uses the same credentials as your Wi-Fi AP. seen Oct 2026 · source
  • On this page Note: Wi-Fi/BLE commands require Connect On your computer, phone, or tablet, scan for Wi-Fi networks, connect to , and enter the password Open a web browser and navigate to (requires mDNS support; works on most networks) or (direct IP; always works). Authentication is for faster access. seen Oct 2026 · source
  • On this page 1. Confirm GhostLink Is up 2. Choose Which Board Is the Bridge 3. Pair the Bridge with the Main Board 4. seen Oct 2026 · source
  • On this page Once GhostESP is flashed and has completed its first boot, control it from the device itself, a browser, a serial terminal, a Flipper Zero, or the desktop Control App. Start with the on-device UI or serial CLI if you are unsure which interface you want. seen Oct 2026 · source
  • Start Here Explore Capabilities BLE Control GhostESP from your Flipper Zero device using the official companion app Desktop tools for controlling and viewing your GhostESP device over USB Write Lua scripts that chain CLI commands, react to events, and automate multi-step workflows on GhostESP docs update · Oct 2026 · source
  • On this page GhostLink connects two ESP32 devices over UART so one can host the access point while the other runs attacks. Wire them together, power them on, and they auto-discover and connect; send any GhostESP command from one device to the other, with no manual connection needed in most cases. docs update · Oct 2026 · source
Hardware Expansion Support shipped Adds support for new ESP32 boards, SD card pin configuration, IR file protocols, and IO expander/Kconfig settings. 16 releases · 5 other sources · first seen May 2025

release 16 total

  • Adds a T-Embed detent mode setting. v2.2 · Oct 2026 · source · release history
  • Adds USB SD card passthrough on ESP32-S3 boards with an SD card. v2.2 · Oct 2026 · source · release history
  • Adds Elecrow CrowPanel 1.28-inch rotary display support with USB Audio volume/mute control. v2.2 · Oct 2026 · source · release history
  • Adds support for ESP32-P4 boards including Elecrow CrowPanel Advanced P4 variants v2.1.2 · Sep 2026 · source · release history
  • Support for LilyGo T-Dongle-S3 (with WebUI BadUSB), LilyGo T-Dongle-C5, Marauder V8, Pancake C5, DRV2605 haptics on S3TWatch, and ENV-III on Cardputer/ADV v2.0 · Jun 2026 · source · release history
  • Adds Wigle EncodedForUseToken support and SD config loader v1.9.5 · Mar 2026 · source · release history

docs

  • On this page touch-enabled - the entire display panel is a single button, so navigation is driven by pressing the screen itself. Use the list and flash it over USB; see the seen Oct 2026 · source
  • On this page Every module in the shell wires straight to the ESP32-1732S019 (S3) board’s GPIO rows - there’s no glue logic in between, so the tables below are the full wiring map for the user-serviceable parts. seen Oct 2026 · source
  • On this page GhostESP maps add-on modules to ESP32 pins. Every release build ships with its pins already configured, so a board with a built-in CC1101, NRF24, NFC, or GPS works out of the box. seen Oct 2026 · source
  • Owner's guide for the GhostLink P1 handheld: battery safety, charging, ports, wiring, pinouts, flashing and maintenance Using the M5Stack AtomS3R with GhostESP, including its button navigation and Grove port seen Oct 2026 · source
  • On this page GhostESP uses an SD card to store captures, logs, and files, and its SD pins can be reconfigured at runtime without recompiling. docs update · Oct 2026 · source
Advanced Wi-Fi Attacks shipped Executes targeted attacks including Deauth, Karma, SAE Flood, EAPOL Logoff, Probe request listen, and DHCP Starve. 9 releases · 7 other sources · first seen May 2025

release 9 total

  • Adds the Auth Flood attack creating a jittered 802.11 auth storm with randomized MACs and rate limiting v2.1.1 · Aug 2026 · source · release history
  • Adds the Probe Request Flood attack which sends directed SSID probes with randomized MACs to multi-selected APs v2.1.1 · Aug 2026 · source · release history
  • Adds combined Wi-Fi Handshake+Deauth attack via attack -hsd subcommand v2.1 · Aug 2026 · source · release history
  • Adds Karma attack capability v1.8 · Oct 2025 · source · release history
  • Enables Deauth Attack to target multiple APs simultaneously via select -a argument (e.g., select -a 2,3,4) v1.6 · Jun 2025 · source · release history
  • Adds Probe request listen attack mode v1.6 · Jun 2025 · source · release history

docs

  • On this page Note: Only perform deauth attacks on networks you own or have permission to test. See Legal and ethical rules How a deauth disconnects a client Client AP Attacker authenticated and associated Frame: Association Addr1 (AP): the BSSID Addr2 (client): station MAC forged Deauth (from the AP) Deauthentication… seen Oct 2026 · source
  • GhostESP’s Wi-Fi tools scan, monitor, connect, capture, and attack from the device itself. - how the Wi-Fi radio is used - network scans and AP lists - join a network you own - deauth, Karma, Evil Portal, DNS Sinkhole, and more Learn what Wi-Fi attacks are and how they work before diving into tools Discover and review… seen Oct 2026 · source
  • On this page Capture Wi-Fi authentication handshakes from nearby networks for analysis. You need GhostESP with an SD card mounted to save captures, and a device that will connect to the target network so it can authenticate and create a handshake. seen Oct 2026 · source
  • On this page Note: Only use this on networks you own or have permission to test. See Legal and ethical rules How the GTK test works GhostESP AP associate as a normal client WPA2-PSK; the GTK is read from the supplicant's WPA state broadcast frame, GTK-encrypted 802.11 data frame, CCMP-protected with the GTK LLC/SNAP →… seen Oct 2026 · source
  • On this page Create fake Wi-Fi networks based on SSIDs that nearby devices are searching for. When a device searches for a network, Karma broadcasts it back; when the device connects, a captive portal starts automatically to capture credentials. seen Oct 2026 · source
  • On this page Wi-Fi attacks are built on a few simple ideas. Here’s what each one does, why someone might use it, and what to know before trying the tools in GhostESP. docs update · Oct 2026 · source

example

  • Perform a combined handshake capture and deauthentication attack against a target AP. attack -hsd <target_ssid> or via Attacks menu v2.1 · Aug 2026 · source
Smart Network Connection shipped Manages network connections by allowing disconnection, enabling/disabling the local AP, and auto-connecting using saved credentials. 12 releases · 1 other source · first seen Apr 2025

Also counts toward: Command-line interface

release 12 total

  • Adds beacon_spam_broadcast_karma function that uses real AP MAC so BSSID matches probe responses. v1.9.8 · Apr 2026 · source · release history
  • Adds GhostLink split-channel wardriving helper mode via startwd --helper flag v1.9.4 · Mar 2026 · source · release history
  • Adds wifistatus CLI command to show connection status and saved network info v1.9.4 · Mar 2026 · source · release history
  • Adds GhostLink display commands to enable/disable the on-device AP and change credentials v1.9.3 · Feb 2026 · source · release history
  • Adds BadUSB display and CLI support with built-in test script for Cardputer, Cardputer ADV, TEmbedC1101, and The Wired Hatter's Banshee v1.9.3 · Feb 2026 · source · release history
  • Adds Ethernet support and docs v1.9 · Dec 2025 · source · release history

docs

  • On this page Connect GhostESP to a Wi-Fi network so it can use network-dependent features. You need the network name and password and permission to connect. Connecting changes the board’s Wi-Fi mode and disconnects devices using the access point - and drops the WebUI - so keep serial or on-device control available. seen Oct 2026 · source
Comprehensive Wi-Fi Scanning shipped Scans for access points and stations simultaneously or over a specific duration, including live non-blocking options. 7 releases · 5 other sources · first seen Apr 2025

Also counts toward: Command-line interface

release 7 total

  • Adds custom channel hopping setting for attacks, AP and station scans, airspace monitor, and packet hopping. v2.2 · Oct 2026 · source · release history
  • Adds custom channel hopping configuration for attacks, AP/station scans, airspace monitor, and packet hopping. v2.2 · Oct 2026 · source · release history
  • Adds auto saving of scans for AP scan, Station scan, Flipper scan, Airtag scan, and BLE GATT scan v1.9.3 · Feb 2026 · source · release history
  • -live argument for scanap for a non blocking scan that lists APs as they're found v1.7 · Aug 2025 · source · release history
  • Adds scanall subcommand to scan access points and stations simultaneously v1.4.9 · Apr 2025 · source · release history
  • Adds channel hopping capability to station scanning v1.4.9 · Apr 2025 · source · release history

docs

  • On this page This first task passively lists nearby Wi-Fi access points without connecting to a network or transmitting anything. Run it from the on-device UI or a serial CLI, not the WebUI on a single-board setup, where the Wi-Fi radio is already hosting . seen Oct 2026 · source
  • On this page An AP scan lists nearby Wi-Fi access points without connecting to them. GhostESP uses an active scan (it transmits probe requests) on normal channels and falls back to passive scanning on DFS/restricted channels. seen Oct 2026 · source
  • On this page Ghostchi is a tamagotchi that lives on your device and hunts WPA handshakes. It scans for access points, ranks them by likelihood of a successful capture, and listens for EAPOL traffic. docs update · Oct 2026 · source

example

  • Scan for both APs and associated stations in a single pass. scanall v1.4.9 · Apr 2025 · source
  • Scan for access points for a specific duration (e.g., 10 seconds) before stopping. scanap 10 v1.4.9 · Apr 2025 · source
Network Host and Service Discovery shipped Performs host discovery via ARP sweep and ICMP ping, then enumerates services per host using mDNS, LLMNR, SSDP, NetBIOS, HTTP banners, and SNMP probes. 8 releases · 3 other sources · first seen Jun 2026

Also counts toward: Command-line interface

release 8 total

  • Adds mdnssniff CLI command for passive local-name sniffing across mDNS, LLMNR, SSDP, and NetBIOS per ARP-discovered host. v2.2 · Oct 2026 · source · release history
  • Adds mdnssniff CLI command to passively learn local device names via mDNS, LLMNR, SSDP, and NetBIOS per ARP-discovered host. v2.2 · Oct 2026 · source · release history
  • Adds custom community string configuration via snmpprobe communities subcommand v2.1.1 · Aug 2026 · source · release history
  • Enables per-host enumeration actions (Scan Open Ports, SSH Banner, NetBIOS, HTTP Banner, SNMP Probe/Walk, SMB Enum) from ARP host details v2.1.1 · Aug 2026 · source · release history
  • Adds SMB enumeration scanner via enumscan and SNMP MIB walk via snmpprobe walk commands v2.1 · Aug 2026 · source · release history
  • SSH Scan, NetBIOS Scan, HTTP Banner Scan, and SNMP Probe accessible from WiFi > Network menu and CLI v2.0 · Jun 2026 · source · release history

docs

  • On this page Port scanning checks which network ports on an authorized device respond to connection attempts, so you can inventory services on your own network. Connect GhostESP to the same network and identify the device with . docs update · Oct 2026 · source
  • On this page first. Only scan networks you own or have permission to test; see Legal and ethical rules Discovery sequence Reuse the last ARP sweep, or run a new one Catches Windows hosts that block ICMP ping Discover services per host mDNS, LLMNR, SSDP, and NetBIOS Probe specific protocols NetBIOS, HTTP banners, SNMP,… docs update · Oct 2026 · source

example

  • Scan only specific hosts for SSH vulnerabilities to focus your engagement. ghostesp 'Scan SSH Host <ip_address>' v2.0 · Jun 2026 · source
BLE and Beacon Spoofing shipped Spams BLE signals to various vendors and manages custom beacon SSID lists for tracking or spoofing. 10 releases · first seen May 2025

release 10 total

  • Adds -name <text> argument to blespam CLI command to advertise a custom Bluetooth name. v2.2 · Oct 2026 · source · release history
  • Adds -name <text> argument to blespam to advertise a custom device name over BLE. v2.2 · Oct 2026 · source · release history
  • Expands BLE device detection to include Tile, Samsung SmartTag, Chipolo, AirPods (per-model variants), Apple Watch, generic FindMy clones, Fast Pair / Find Hub accessories, hearing aids, exposure beacons, and Chameleon Ultra. v2.2 · Oct 2026 · source · release history
  • Adds bledetect CLI command and Devices menu row for BLE device detect scan, with list, track, and AirTag spoof actions.⁠︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄⁠ v2.2 · Oct 2026 · source · release history
  • OUI prefix/vendor filtered BLE device scanning with RGB match pulses v2.0 · Jun 2026 · source · release history
  • Adds GATT scanning, service scanning and RSSI tracking v1.9 · Dec 2025 · source · release history
Device Configuration and Management shipped Provides commands to set device parameters such as timezone, country code, RGB mode, backlight, brightness, power saving, and view chip info. 9 releases · first seen May 2025

Also counts toward: Command-line interface

release 9 total

  • Adds Country selector to Settings > Wi-Fi. v2.2 · Oct 2026 · source · release history
  • Runtime-configurable GPS baud rate via Settings, gpsbaud CLI, WebUI, and a new GPS menu under Scans & Data v2.0 · Jun 2026 · source · release history
  • Adds set/getneopixelbrightness commands and ability to set settings via CLI in serial console v1.8 · Oct 2025 · source · release history
  • setrgbmode command to change the RGB mode v1.7 · Aug 2025 · source · release history
  • chipinfo command to display chip information v1.7 · Aug 2025 · source · release history
  • Backlight percentage setting for PWM enabled devices v1.7 · Aug 2025 · source · release history
Infrared Receive Support shipped Enables receiving, decoding, and managing infrared protocols using Easy Learn Mode. 7 releases · 1 other source · first seen Jun 2025

release 7 total

  • Adds Wi-Fi multi-select flows for APs and stations in the Scan & Select menu, allowing multiple targets to be selected before running attacks/actions. v1.9.8 · Apr 2026 · source · release history
  • Adds GTK abuse testing flow for checking client isolation bypass behavior after joining a target Wi-Fi network. v1.9.8 · Apr 2026 · source · release history
  • Adds IR Dazzler functionality to pulse IR at 38kHz 95% duty load v1.9 · Dec 2025 · source · release history
  • Adds IR CLI support v1.9 · Dec 2025 · source · release history
  • Adds included TURNHISTVOFF universal IR file with popular TV Power buttons v1.8.1 · Nov 2025 · source · release history
  • Infrared RX support (only enabled on TEmbed C1101) for receive and decode of Flipper Zero protocols, including rename, delete, add remotes, and Easy Learn Mode auto-naming buttons v1.7 · Aug 2025 · source · release history

docs

  • On this page ( remotes/ universals/ ), Mounting Most boards keep the SD card mounted for the whole session. seen Oct 2026 · source
CLI Enhancements shipped Improves the serial console with command history, inline editing, and specific scanning utilities for ARP and SSH. 3 releases · 3 other sources · first seen Aug 2025

Also counts toward: Command-line interface

release

  • Adds SD Card CLI for control via WebSerial File Browser v1.9 · Dec 2025 · source · release history
  • Adds command history with up/down navigation and full in-line cursor editing to the serial console v1.8 · Oct 2025 · source · release history
  • scanarp command to initiate an ARP scan on the local network v1.7 · Aug 2025 · source · release history

docs

  • On this page Port scanning checks which network ports on an authorized device respond to connection attempts, so you can inventory services on your own network. Connect GhostESP to the same network and identify the device with . docs update · Oct 2026 · source
  • On this page first. Only scan networks you own or have permission to test; see Legal and ethical rules Discovery sequence Reuse the last ARP sweep, or run a new one Catches Windows hosts that block ICMP ping Discover services per host mDNS, LLMNR, SSDP, and NetBIOS Probe specific protocols NetBIOS, HTTP banners, SNMP,… docs update · Oct 2026 · source

example

  • Scan for active SSH services on a specific host. scanssh 192.168.1.50 v1.7 · Aug 2025 · source
Lua Scripting Automation shipped Allows users to write Lua scripts that chain CLI commands, react to events, and automate multi-step workflows on the device. 4 releases · 1 other source · first seen Aug 2026

Also counts toward: Plugin API support, Scripting API, Scripting language support

release

  • Adds forward_back manifest option so plugin apps can handle BACK navigation themselves, and GHOSTESP_API_HAS() macro for feature-gating plugin API fields. v2.2 · Oct 2026 · source · release history
  • Adds ui_obj_get_rects and ui_obj_apply_props batched plugin UI calls for faster plugin menus. v2.2 · Oct 2026 · source · release history
  • Adds an embeddable native options list to the plugin API, plus widget rects, design metrics, a page stack, and raw touch state. v2.2 · Oct 2026 · source · release history
  • Adds GhostScript sandboxed Lua runtime with script list, script run <index>, script status, and script stop CLI commands v2.1 · Aug 2026 · source · release history

docs

  • Start Here Explore Capabilities BLE Control GhostESP from your Flipper Zero device using the official companion app Desktop tools for controlling and viewing your GhostESP device over USB Write Lua scripts that chain CLI commands, react to events, and automate multi-step workflows on GhostESP docs update · Oct 2026 · source
Wireshark PCAP Streaming shipped Streams real-time packet captures over USB/UART for analysis in Wireshark. 3 releases · 2 other sources · first seen Jan 2026

release

  • Adds signal, channel, and rate metadata to captures so Wireshark shows per-frame radio details. v2.2 · Oct 2026 · source · release history
  • Adds control frames (RTS/CTS/ACK/Block Ack) to EAPOL and Wireshark captures. v2.2 · Oct 2026 · source · release history
  • Added Wireshark dongle mode for real-time PCAP streaming over USB/UART v1.9.2 · Jan 2026 · source · release history

docs

  • On this page for Wireshark. Instead of saving packets to an SD card, the device streams Wi-Fi and BLE traffic directly to your computer in real-time-just like a commercial Wi-Fi adapter in monitor mode. docs update · Oct 2026 · source
  • On this page Record Wi-Fi network traffic and save it to the SD card, then review the captured data on your computer or Flipper Zero. You need GhostESP with an SD card mounted; a Flipper Zero with a microSD card is optional if you want to save captures to the Flipper. docs update · Oct 2026 · source
Evil Portal Customization shipped Allows hosting custom evil portal HTML pages stored on the SD card or using default embedded templates. 3 releases · 2 other sources · first seen Apr 2025

release

  • Adds SD JIT mounting for custom evil portal menu option v1.9.4 · Mar 2026 · source · release history
  • Custom Evil Portal HTML file support from SD Card (max 2048 bytes) v1.7 · Aug 2025 · source · release history
  • Includes default evil portal HTML directly in the firmware binary v1.4.9 · Apr 2025 · source · release history

docs

  • On this page Note: This feature requires a device connected to a network via Wi-Fi or Ethernet. It is mutually exclusive with Evil Portal - starting one will stop the other. docs update · Oct 2026 · source
  • On this page Create a fake Wi-Fi network that shows a login page when users connect. You need an SD card inserted and mounted; portal files are optional because a default portal is built in. Put custom portal HTML (and any referenced assets) in so Note: Only test on networks you own or have permission to test. docs update · Oct 2026 · source
WiGLE Integration shipped Automates wardriving data upload, file management, and statistics retrieval for WiGLE networks. 5 releases · first seen Mar 2026

release

  • Adds the Bad Msg attack using forged EAPOL key-install frames to drop stations from WPA networks v2.1.1 · Aug 2026 · source · release history
  • Adds WiGLE manual upload browser in display settings with paged CSV list and per-file upload actions v1.9.4 · Mar 2026 · source · release history
  • Adds auto upload to WiGLE functionality v1.9.4 · Mar 2026 · source · release history
  • Adds WiGLE stats popup in display settings with scroll and close controls v1.9.4 · Mar 2026 · source · release history
  • Adds wigle files [page], wigle upload <filename>, and wigle stats CLI commands v1.9.4 · Mar 2026 · source · release history
NFC Protocol Support shipped Reads and writes MIFARE Classic and NTAG protocols via PN532, supporting dictionary attacks and NDEF parsing. 5 releases · first seen Oct 2025

release

  • Added Wireshark dongle mode for real-time PCAP streaming over USB/UART v1.9.2 · Jan 2026 · source · release history
  • Adds basic Mifare Desfire detection v1.9 · Dec 2025 · source · release history
  • Adds Flipper Zero NFC parser compatibility layer with support for Aime, CSC Service Works, WashCity, Metromoney, Bip, CharlieCard, Disney Infinity, HI!, HID PACS, H World, Kazan, Microel, MiZIP, Plantain, Saflok, Skylanders, SmartRider, Social Moscow, Troika, Two Cities, Umarsh, Zolotaya Korona, and Zolotaya Korona… v1.9 · Dec 2025 · source · release history
  • Adds MIFARE Classic (Mini/1K/4K) support via PN532 including dictionary attack, magic backdoor detection, and NDEF TLV parsing v1.8 · Oct 2025 · source · release history
  • Adds NTAG (Type 2) read/write support for NTAG213/215/216 with NDEF parsing to Flipper .nfc format via PN532 v1.8 · Oct 2025 · source · release history
BadUSB Support shipped Emulates USB keyboards to inject payloads and scripts on connected hosts. 4 releases · first seen Feb 2026

Also counts toward: Command-line interface

release

  • Adds subfolder navigation to IR Remotes and Universals, NFC Saved/Write/Emulate, SubGHz Saved, Evil Portal, Favorites, and BadUSB. v2.2 · Oct 2026 · source · release history
  • badusb type_char CLI command for typing single ASCII characters v2.0 · Jun 2026 · source · release history
  • Adds Ghostchi App for use with the tool. v1.9.8 · Apr 2026 · source · release history
  • Adds BadUSB display and CLI support with built-in test script for Cardputer, Cardputer ADV, TEmbedC1101, and The Wired Hatter's Banshee v1.9.3 · Feb 2026 · source · release history
Wi-Fi Handshake Capture shipped Captures Wi-Fi authentication handshakes from nearby networks and saves them to the SD card for offline analysis. 3 releases · 1 other source · first seen Jun 2026

release

  • Adds control frames (RTS/CTS/ACK/Block Ack) to EAPOL and Wireshark captures. v2.2 · Oct 2026 · source · release history
  • Adds 802.1Q/QinQ VLAN tag support to captures so VLAN-tagged traffic and handshakes are recognised. v2.2 · Oct 2026 · source · release history
  • On-device PCAP browser with hc22000 markers (WiFi > Capture) and PCAP to hc22000 export on displays v2.0 · Jun 2026 · source · release history

docs

  • On this page Capture Wi-Fi authentication handshakes from nearby networks for analysis. You need GhostESP with an SD card mounted to save captures, and a device that will connect to the target network so it can authenticate and create a handshake. seen Oct 2026 · source
GhostLink Dual-Device Bridge shipped Connects two ESP32 devices over UART so one hosts the access point while the other runs attacks, auto-discovering and pairing without manual configuration. 1 release · 2 other sources · first seen Oct 2026

Also counts toward: Command-line interface

release

  • Adds glbench CLI command and Settings > Tools row to benchmark GhostLink throughput and view link statistics. v2.2 · Oct 2026 · source · release history

docs

  • On this page 1. Confirm GhostLink Is up 2. Choose Which Board Is the Bridge 3. Pair the Bridge with the Main Board 4. seen Oct 2026 · source
  • On this page GhostLink connects two ESP32 devices over UART so one can host the access point while the other runs attacks. Wire them together, power them on, and they auto-discover and connect; send any GhostESP command from one device to the other, with no manual connection needed in most cases. docs update · Oct 2026 · source
LoRa and Meshtastic Support shipped Adds LoRa radio support across multiple ESP32 boards, including Meshtastic and Meshcore-compatible operation on SX1262 radios with BLE app integration. 3 releases · first seen Oct 2026

release

  • Adds LoRa support to Heltec V3, LilyGo T-Deck, Elecrow CrowPanel Advance 2.4/2.8/4.3-inch, and CrowPanel Advanced P4 7/9/10.1-inch. v2.2 · Oct 2026 · source · release history
  • Adds Meshtastic and Meshcore-compatible LoRa support for SX1262 radios, with BLE app support via the official Meshtastic and Meshcore apps. v2.2 · Oct 2026 · source · release history
  • Adds Meshtastic and Meshcore-compatible LoRa support for SX1262 radios on Heltec V3, LilyGo T-Deck, CrowPanel Advance, and CrowPanel Advanced P4. v2.2 · Oct 2026 · source · release history
802.15.4 Packet Capture shipped Captures 802.15.4 network packets on compatible hardware. 1 release · 2 other sources · first seen Oct 2025

release

  • Adds 802.15.4 packet capture capability (limited to C5, C6 hardware) v1.8 · Oct 2025 · source · release history

docs

  • On this page An environment sweep runs a sequence of wireless observations and saves the results to the SD card. The data you get depends on the board, connected hardware, and enabled radios: 802.15.4 capture is available on ESP32-C5 and C6 only, and GPS fields require a connected GPS module. docs update · Oct 2026 · source

example

  • Lock WiFi capture to channel 6 and ensure all 802.15.4 captures also stay on that channel. ghostesp capture -channel 6 v2.0 · Jun 2026 · source
CLI Source and Config File Support verified Allows the CLI to load commands from a source file and apply configuration via a --config flag, with configurable output options. 3 other sources · first seen Sep 2026

Also counts toward: Command-line interface

command line

Application Management and Development Tools shipped Provides CLI commands to list, reload, inspect, launch, stop, reset, and scaffold native SD applications, along with Cloud Store integration for browsing and installing assets. 2 releases · 1 other source · first seen Jun 2026

Also counts toward: Command-line interface

release

  • Adds Cloud Store integration for browsing and installing apps, scripts, and asset packs via Wi-Fi v2.1 · Aug 2026 · source · release history
  • apps CLI for listing, reloading, inspecting, launching, stopping, and resetting native SD apps v2.0 · Jun 2026 · source · release history

example

  • Stream wardriving data to a companion app without needing local storage or GPS on the device. ghostesp wdstream start v2.0 · Jun 2026 · source
Wireless Spectrum Analysis shipped Monitors Wi-Fi channel usage to identify congestion and select clear channels. 2 releases · 1 other source · first seen Apr 2025

Also counts toward: Command-line interface

release

  • WiFi Airspace Monitor with realtime packet/threat insights, fast channel hopping, suspect device cards, adaptive channel dwell, EWMA baseline, and packets/sec sparkline v2.0 · Jun 2026 · source · release history
  • Adds congestion command to display current channel usage v1.4.9 · Apr 2025 · source · release history

example

  • Check which Wi-Fi channels are currently congested to select a clear one. congestion v1.4.9 · Apr 2025 · source
GPS Information Display shipped Displays GPS fix status, satellite counts, and routing constraints in the UI. 3 releases · first seen Dec 2025

Also counts toward: Command-line interface

release

  • Adds new wardriving and GPS info display view with fix mode and satellite count v1.9.4 · Mar 2026 · source · release history
  • Adds optional software NMEA RX backend (minmea_soft) for template-specific GPS routing constraints v1.9.4 · Mar 2026 · source · release history
  • Adds gpspin command to set the GPS pin for recieving data v1.9 · Dec 2025 · source · release history
Audio Playback shipped Plays audio on supported hardware including USB Audio volume and mute control on the CrowPanel 1.28-inch display and onboard speaker amp playback on the LilyGo T-Deck. 2 releases · first seen Oct 2026

release

  • Adds Elecrow CrowPanel 1.28-inch rotary display support with USB Audio volume/mute control. v2.2 · Oct 2026 · source · release history
  • Adds Audio Player support to the LilyGo T-Deck via its onboard MAX98357A speaker amp. v2.2 · Oct 2026 · source · release history
Clock Display shipped Provides a status-bar clock and a dedicated Clock view with switchable analog and seven-segment faces. 2 releases · first seen Oct 2026

release

  • Adds a clock to the centre of the status bar, toggleable in Settings > Date & Time. v2.2 · Oct 2026 · source · release history
  • Adds switchable analog and seven-segment clock faces to the Clock view. v2.2 · Oct 2026 · source · release history
Drone Detection and Spoofing shipped Detects nearby drones and executes spoofing countermeasures. 1 release · 1 other source · first seen Dec 2025

release

docs

  • On this page GhostESP’s aerial detector watches both Wi-Fi and BLE airspace to find Remote ID beacons, DJI links, and drone-branded networks. It alternates radios so scans run reliably on every ESP32 board. docs update · Oct 2026 · source
Runtime Log Control shipped Allows adjusting global logging verbosity at runtime without requiring a device reboot. 1 release · 1 other source · first seen Sep 2026

Also counts toward: Command-line interface

release

  • Adds loglevel command for runtime global log-level control v2.1.2 · Sep 2026 · source · release history

example

  • Adjust logging verbosity at runtime without rebooting loglevel debug v2.1.2 · Sep 2026 · source
USB HID Keyboard Host Support shipped Uses ESP32-S3 hardware to act as a USB host for keyboard input and UI control. 2 releases · first seen Dec 2025

release

  • Adds Wake-on-LAN gadget capability v2.1.1 · Aug 2026 · source · release history
  • Adds USB HID keyboard host support on ESP32-S3 devices for controlling the UI and inputting text v1.9 · Dec 2025 · source · release history
Sub-GHz Signal Analysis and Replay shipped Captures, replays, and analyzes sub-GHz signals using the CC1101 transceiver across multiple frequency bands. 2 releases · first seen May 2026

Also counts toward: Command-line interface

release

  • wpa3check CLI to check WPA3 compliance via WiFi > Scan & Select menu or command line v2.0 · Jun 2026 · source · release history
  • CC1101 sub-GHz support with frequency analyzer, capture/replay, and multi-band scanning (315/390/433.92/868.35/915 MHz) v1.9.9 · May 2026 · source · release history
Camera Stream and Detection shipped Streams live video from a connected camera and detects nearby Flock Safety camera hardware. 2 releases · first seen May 2026

release

  • Live MJPEG camera stream accessible at http://ghostesp.local/camera v1.9.9 · May 2026 · source · release history
  • Flock Safety camera detector based on bennjordan/flock-you v1.9.9 · May 2026 · source · release history
App Gallery Organization shipped Organizes device apps into categorized folders (Tools, System, Games, Communication, Media, Sensors) shared between built-in and SD card apps via a manifest category field. 1 release · first seen Oct 2026

release

  • Adds Tools, System, Games, Communication, Media, and Sensors folders to the Apps gallery, shared with SD apps via the manifest category field. v2.2 · Oct 2026 · source · release history
Game Emulation shipped Runs a Game Boy and Game Boy Color emulator app on the device with save state and battery save support. 1 release · first seen Oct 2026

release

  • Adds a Game Boy / Game Boy Color emulator app with save states and battery saves. v2.2 · Oct 2026 · source · release history
VLAN Traffic Capture shipped Captures VLAN-tagged traffic (802.1Q/QinQ), control frames, and per-frame signal/channel/rate information. 1 release · first seen Oct 2026

release

  • Adds capture support for VLAN-tagged traffic (802.1Q/QinQ), control frames, and per-frame signal/channel/rate info. v2.2 · Oct 2026 · source · release history
DIAL/Chromecast Network Casting documented Casts random YouTube videos to all DIAL-enabled devices such as Chromecasts, smart TVs, and Roku devices discovered on the same network. 1 other source · first seen Oct 2026

docs

  • On this page Cast random YouTube videos to all DIAL-enabled devices (Chromecasts, smart TVs, Roku, etc.) on your network. Connect GhostESP to the same Wi-Fi network as the target devices first. Note: Only test on networks and devices you own or have permission to test. docs update · Oct 2026 · source
Bluetooth HID Keyboard Support shipped Enables emulating Bluetooth keyboards to inject DuckyScript payloads via BLE with on-device UI and CLI integration. 1 release · first seen Sep 2026

Also counts toward: Command-line interface, Scripting language support

release

  • Adds new native BadBLE Bluetooth HID keyboard capability that runs DuckyScript payloads over BLE with on-device UI and CLI support v2.1.2 · Sep 2026 · source · release history
Parallel Port Scanning shipped Performs subnet discovery using parallel TCP port scanning with multiple sockets for increased speed. 1 release · first seen Aug 2026

release

  • Enables parallel TCP port scanning with 8 sockets for faster subnet discovery v2.1.1 · Aug 2026 · source · release history
Smart Home Device Integration shipped Discovers and controls IoT devices including Govee LAN lights and DIAL/Chromecast compatible screens. 1 release · first seen Aug 2026

release

SMB Share Enumeration shipped Discovers and enumerates SMB shares on the local network as part of service discovery capabilities. 1 other source · first seen Aug 2026

example

  • Enumerate SMB shares on the local network. enumscan v2.1 · Aug 2026 · source
Wardriving Data Streaming shipped Enables real-time streaming of wardriving data to companion applications without requiring local storage or GPS on the device. 1 release · first seen Jun 2026

release

  • wdstream CLI for companion-app wardriving streaming without GPS/SD/CSV/PCAP requirements v2.0 · Jun 2026 · source · release history
Jamming Detection shipped Detects passive jamming activity by identifying specific 2.4GHz threat signatures in the NRF24 frequency analyzer. 1 release · first seen May 2026

release

  • Passive jamming detection engine in the NRF24 frequency analyzer identifying 2.4GHz threat signatures v1.9.9 · May 2026 · source · release history
Factory Reset shipped Wipes non-volatile storage and reboots the device to restore default settings. 1 release · first seen Mar 2026

release

WiGLE Wardriving Helper Mode shipped Provides split-channel wardriving assistance for collaborative data collection. 1 release · first seen Mar 2026

release

  • Adds GhostLink split-channel wardriving helper mode via startwd --helper flag v1.9.4 · Mar 2026 · source · release history
Comprehensive Sweep Scanning shipped Simultaneously scans WiFi, BLE, GPS, and 802.15.4 networks and exports data to CSV. 1 release · first seen Dec 2025

Also counts toward: CSV data export

release

  • Adds a Sweep scan to capture WiFi, BLE, GPS and 802154 data in a csv file on SD v1.9 · Dec 2025 · source · release history
Wired Screen Mirroring shipped Mirrors the device screen via a wired connection for real-time display. 1 release · first seen Dec 2025

release

Lines in monospace are the tool's own words: help text parsed from its source, or an endpoint from its API document. Under release, a line is our summary of a dated release. Under docs, it is quoted from the tool's own documentation or website. Each links back to the source it came from.

Score card

  1. Shipping velocity releases a month, last 12 months
  2. Documentation quality release-notes rubric, 0–100
  3. Breaking-change discipline how rarely a release breaks users, and notice given
  4. Maintenance risk quiet time against its own cadence, maintainers
  5. Innovation & surface new capabilities, API and MCP surface
  6. Community health
  7. Contributor trend distinct committers, this year against last
  8. Maintainer concentration bus factor now against a year ago
  9. Issue backlog trend issues closed per issue opened, 12 months
  10. Responsiveness median time to a maintainer’s first reply

Nine scores for GhostESP, each built from the releases, notes and API history this site tracks — and, on Researcher and Business, where it stands among every measured tool in its category and how that has moved.

Score cards are part of every paid plan.

See plans →

Each score is 0–100 on a published rubric, derived from data this site already shows. A dimension we cannot measure says so — it is never scored 0 and never enters a rank.

How this is scored
  • Shipping velocity — releases a month over the last 12 months, on a log scale where 16 a month scores 100. Needs 3 releases in the window.
  • Documentation quality — the release-notes rubric published on the analytics page, unchanged.
  • Breaking-change discipline — the share of releases carrying a breaking change (none scores 100, half or more scores 0). Only projects that label breaking changes are measured: a clean record cannot be told from an unlabelled one.
  • Maintenance risk — quiet time measured against the tool's own release cadence (quiet longer than 90 days and three typical gaps scores 0), plus the number of active maintainers and whether contributors are growing, where known. Higher is lower risk.
  • Innovation & surface — new capabilities in the feature ledger this year, API and MCP operations added, and the share of commits that are features: the mean of whichever we hold.
  • Community health (open-source tools only) — each is a direction, not a size: contributors this year against last, the bus factor now against a year ago, and issues closed per issue opened, where steady scores 50, doubled 100 and halved 0; plus the median time to a maintainer's first reply (an hour scores about 100, a month or more 0). A commercial card has no repository and carries none of the four.
  • Documented delivery (commercial tools) — when a vendor's documented new capabilities have slowed against its own baseline, that counts against the overall standing as heavily as two low dimensions. Steady delivery, or too little history to judge, leaves the standing alone; it is never a sixth score.
  • Open-source tools are scored on repository signals; commercial tools on their published changelog. Ranks compare tools within one category and one profile and need at least five measured peers; the overall standing needs three ranked dimensions. Best-in-breed or consolidator is a shape, not a quality, and is never scored.

Release-note detail over time

See how much detail GhostESP puts in its release notes, quarter by quarter, and compare it with tracked tools in the same category. This history uses up to ten retained, reviewed notes per tool; sparse or blank older quarters may reflect that limit.

Checking release-note history…

Explore the full chart →

Documentation timing

See whether GhostESP's docs change before or after its release notes, release by release.

Documentation timing is included with Practitioner, Researcher and Business. When the docs come first, you can read about a change before it's announced.

See plans → Already subscribed? Sign in →

Coverage

Missing something? Tell us

What GhostESP connects to, runs on and detects, read from its release notes and docs. So far: 1 new integration.

Show

1 change, tracked since Oct 3, 2026.

  • Oct 32026

    new DIAL Connect (TV Cast) — DIAL protocol support for Chromecast, smart TVs, Roku

    With DIAL-enabled devices

    Cast random YouTube videos to all DIAL-enabled devices (Chromecasts, smart TVs, Roku, etc.) on your network.

    Source ↗

How we count

Read from 9 of 38 release notes and docs updates we hold for GhostESP. "First seen" is the earliest note that names something; "last" is the latest. Our history may start partway through GhostESP's life, so an old integration can show a recent first-seen date.

Each change counts once: "added 40 checks" is one line, so the numbers measure how often coverage moves, not how big the catalogue is or how well it detects.

Releases

Show
Coverage in all entries

38 entries

  1. October 202617
  2. September 20261
  3. August 20262
  4. June 20261
  5. May 20261
  6. April 20261
  7. March 20264
  8. February 20261
  9. January 20261
  10. December 20251
  11. November 20251
  12. October 20251
  13. September 20251
  14. August 20251
  15. June 20251
  16. May 20252
  17. April 20251
    Show
    Coverage in all entries

    38 entries

    Project health

    Issue, contributor and maintainer activity in GhostESP-Revival/GhostESP, 2023-12 – 2026-11, as of 2026-11-03. Twelve-month figures first; the trend lines run the whole window.

    1. Contributors 13 +2 vs prior 12 months
    2. Maintainers 2 +1 joined · −2 left, last 12 months
    3. Bus factor 1 committers behind half the commits
    4. Community-filed 54% of issues opened, last 12 months
    5. Median time to close 1.7 days first maintainer reply 12 hours
    6. Open backlog 78 of 221 issues ever filed
    1. Issues opened / month 8 · 2 communitymaintainers
    2. Open backlog 78
    3. Contributors / month 0
    4. Commits / month 0
    5. Stars not measured
    Issue themes, last 12 months
    • bugs 19%
    • features 19%
    • questions 5%
    • docs 1%
    • other 56%

    Counts from the project's public repository and git history; no individuals are identified. Maintainers are the committers covering 80% of the last year's commits. how we measure this

    Articles

    1 article · updated Nov 10, 2026

    Where GhostESP turns up in what others publish: how-tos, attack reports that name it, and incident write-ups. A row says why it is here and quotes where the article names it; the link goes to the publisher.

    Tutorials & guides 1

    Libraries its release ships

    What its latest release locks, checked against known advisories.

    None of its release's images build from a lockfile we can read.

    Add the badge to your README

    Maintain this project? The badge links readers straight to this page, so they can follow every release here.

    Tracked by Cyber Toolchain Choose a badge style and copy the code →
    Saved in this browser. Sign in to sync your tools.