PAGES
← all tools
◆ Hacking Hardware

GreatFET One

v2024.0.2 open-source

Free plan: not checked yet · Open source: yes

GreatFET One is an interface tool for hardware hacking, making, and reverse engineering, produced by Great Scott Gadgets.

What you can do now

Checking Plays…

Summary

GreatFET One is an open-source hardware hacking platform, comprising a USB-connected board plus firmware and host software for probing and controlling other hardware over interfaces like GPIOGPIOGeneral-Purpose Input/Output pins on a microcontroller or SoC that firmware can individually control as digital signals, letting cyber tools interact directly with hardware interfaces like UART, JTAG, or SPI., SPISPISerial Peripheral Interface, a synchronous communication bus standard used to connect microcontrollers to sensors, flash memory, and other peripherals at short range; cyber tools use it to read or write firmware on embedded devices., I2C, and UARTUARTA hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack.. It is free to use, and you drive it through a command-line toolset installed on your computer alongside the firmware that runs on the device itself. It is aimed at hardware hackers, embedded security researchers, and firmware developers who need direct, programmable access to a target's pins and buses rather than a fixed-function adapter. It sits in the same space as USB-based hardware hacking tools that expose low-level interfaces for reverse engineering and debugging, giving practitioners a general-purpose bridge between a PC and unfamiliar hardware. Support runs through GitHub issues and a Discord community rather than a vendor helpdesk, and documentation is maintained openly.

GreatFET One is an interface tool for hardware hacking, making, and reverse engineering, produced by Great Scott Gadgets.

How GreatFET One helps

Can I talk to this device's SPI or I2C bus without building custom hardware?

exposes those buses through the host command-line toolset, letting you issue transactions to the target and see the responses directly from your computer

What is this board actually saying over its serial line?

bridges the target's UART to the host so you can capture or inject traffic on the connection as it happens

How do I script a repeatable sequence of hardware probing steps instead of doing it by hand each time?

drives GPIO, SPI, I2C, and UART operations through a command-line toolset on the host, so a probing sequence can be issued as commands rather than wired up manually each run

Is the logic I'm sending to a target board actually reaching it correctly?

lets you both drive and read back signals on the same interface, so a mismatch between what you sent and what the target reports shows up directly in the host output

all 4 features, with the evidence for each →

Languages

Not documented

Device

Great Scott Gadgets GreatFET One
image © Great Scott Gadgets · mirrored to the media CDN · original ↗

Spec · shipping GreatFET One

interfaces
Two USB ports (Hi-Speed USB), 100 expansion pins, extensible with neighbor boards
protocols
Programmable digital I/O; SPI, I2C, UART, JTAG; analog I/O (ADC/DAC)
software
Python API; logic analysis, debugging, Facedancer USB functions

from the vendor's spec page ↗

from
$89
GreatFET One list
1 of 1 configurations sold out
stock
sold out
checked Nov 15, 2026
status
shipping
GreatFET One
latest firmware
v2024.0.2
GreatFET One · Sep 19, 2024

Availability

announced
not yet captured
no source captured
pre-order
not yet captured
no source captured
shipped
May 8, 2019
press
discontinued
still on sale

A slip is called out here the day the vendor's own delivery estimate moves past the promised window. A "coming" milestone is the vendor's own wording, read off the page it links to — never a date we inferred.

Price · last checked Nov 15, 2026

configuration generation launch today status source
GreatFET One GreatFET One — $89 sold out shipping list
List price of every configuration · Oct 1, 2026 → Nov 15, 2026 greatfet-one price event wayback capture
$100$0 Oct 1, 2026 Nov 15, 2026
39 live captures

Device history

  1. GreatFET One sold_out Oct 1, 2026 · source ↗ derived

    no further detail captured

  2. GreatFET One shipped May 8, 2019 · source ↗ press

    Great Scott Gadgets said it had started shipping the first production run to resellers the previous week.

Features

4 capabilities · 3 backed by code, an API document or a real run

Built from GreatFET One's releases, docs, README and our own runs. “Seen” marks the month we first spotted a release the vendor didn't date. Group names and tags are our labels.

Compare with peers →

What GreatFET One offers you

  • Command-line interface1
All capabilities 4 capabilities
GreatFET hardware hacking platform support shipped Provides firmware and software for the GreatFET hardware hacking platform, enabling interaction with and exploration of hardware targets. 14 releases · 6 other sources · first seen Sep 2019

release 14 total

  • Adds Windows support for Cynthion. v2024.0.2 · Sep 2024 · source · release history
  • Updates udev rules to use the uaccess tag instead of the plugdev group v2024.0.1 · Jun 2024 · source · release history
  • Adds IPython to the GreatFET installation by default v2024.0.1 · Jun 2024 · source · release history
  • Adds initial implementation of usb1 bulk transfer backend in libgreat v2024.0.0 · May 2024 · source · release history
  • Adds support for configuring all GPIO pin modes via gpio module in GreatFET host tools v2024.0.0 · May 2024 · source · release history
  • Adds a new chipcon programmer for Texas Instruments CCxxxx (SWRA124) devices with CLI support via greatfet chipcon. v2021.2.1 · Feb 2021 · source · release history

docs

  • Firmware and software for the GreatFET hardware hacking platform by Great Scott Gadgets.

example

  • Run the firmware update command to flash the latest release to connected devices. greatfet_firmware --autoflash v2024.0.0 · May 2024 · source
  • Access an I2C EEPROM in Python to read specific bytes. import greatfet as gf g = gf.GreatFET() eeprom = g.create_programmer('microchipEEPROM', device='24LC128') data = eeprom.read_bytes(0, 10) v2021.2.1 · Feb 2021 · source
  • Set the DAC output to 2.2 volts. greatfet dac -f voltage 2.2 v2020.1.1 · Jan 2020 · source
  • Initiate a JTAG session directly from the terminal. greatfet jtag v2020.1.1 · Jan 2020 · source
  • Update GreatFET device firmware and ensure host tools are compatible in one step. greatfet firmware --autoflash v2019.9.1 · Sep 2019 · source
Flash memory write control verified Allows users to customize flash memory operations by disabling pre-write erasure, post-write verification, and Intel hex format detection. 3 other sources · first seen Feb 2021

command line

  • --bin — Disable Intel hex detection and flash as-is. v2021.2.1 · Feb 2021 · command-line history
  • --no-verify — Do not verify the flash after performing a write operation v2021.2.1 · Feb 2021 · command-line history
  • --no-erase — Do not erase the flash before performing a write operation v2021.2.1 · Feb 2021 · command-line history
Device identification verified Enables retrieval of the connected device's chip identifier. 1 other source · first seen Feb 2021

command line

  • --chip-id — Print the chip ID of the connected device. v2021.2.1 · Feb 2021 · command-line history
Flash memory erasure control verified Provides commands to perform standard or mass erasure of flash memory before writing. 1 other source · first seen Feb 2021

Also counts toward: Command-line interface

command line

Lines in monospace are the tool's own words: help text parsed from its source, or an endpoint from its API document. Under release, a line is our summary of a dated release. Under docs, it is quoted from the tool's own documentation or website. Each links back to the source it came from.

Score card

  1. Shipping velocity releases a month, last 12 months
  2. Documentation quality release-notes rubric, 0–100
  3. Breaking-change discipline how rarely a release breaks users, and notice given
  4. Maintenance risk quiet time against its own cadence, maintainers
  5. Innovation & surface new capabilities, API and MCP surface
  6. Community health
  7. Contributor trend distinct committers, this year against last
  8. Maintainer concentration bus factor now against a year ago
  9. Issue backlog trend issues closed per issue opened, 12 months
  10. Responsiveness median time to a maintainer’s first reply

Nine scores for GreatFET One, each built from the releases, notes and API history this site tracks — and, on Researcher and Business, where it stands among every measured tool in its category and how that has moved.

Score cards are part of every paid plan.

See plans →

Each score is 0–100 on a published rubric, derived from data this site already shows. A dimension we cannot measure says so — it is never scored 0 and never enters a rank.

How this is scored
  • Shipping velocity — releases a month over the last 12 months, on a log scale where 16 a month scores 100. Needs 3 releases in the window.
  • Documentation quality — the release-notes rubric published on the analytics page, unchanged.
  • Breaking-change discipline — the share of releases carrying a breaking change (none scores 100, half or more scores 0). Only projects that label breaking changes are measured: a clean record cannot be told from an unlabelled one.
  • Maintenance risk — quiet time measured against the tool's own release cadence (quiet longer than 90 days and three typical gaps scores 0), plus the number of active maintainers and whether contributors are growing, where known. Higher is lower risk.
  • Innovation & surface — new capabilities in the feature ledger this year, API and MCP operations added, and the share of commits that are features: the mean of whichever we hold.
  • Community health (open-source tools only) — each is a direction, not a size: contributors this year against last, the bus factor now against a year ago, and issues closed per issue opened, where steady scores 50, doubled 100 and halved 0; plus the median time to a maintainer's first reply (an hour scores about 100, a month or more 0). A commercial card has no repository and carries none of the four.
  • Documented delivery (commercial tools) — when a vendor's documented new capabilities have slowed against its own baseline, that counts against the overall standing as heavily as two low dimensions. Steady delivery, or too little history to judge, leaves the standing alone; it is never a sixth score.
  • Open-source tools are scored on repository signals; commercial tools on their published changelog. Ranks compare tools within one category and one profile and need at least five measured peers; the overall standing needs three ranked dimensions. Best-in-breed or consolidator is a shape, not a quality, and is never scored.

Release-note detail over time

See how much detail GreatFET One puts in its release notes, quarter by quarter, and compare it with tracked tools in the same category. This history uses up to ten retained, reviewed notes per tool; sparse or blank older quarters may reflect that limit.

Checking release-note history…

Explore the full chart →

Releases

Show

7 entries

  1. October 20261
  2. September 20241
  3. June 20241
  4. May 20241
  5. February 20211
  6. January 20201
  7. September 20191
    Show

    7 entries

    Project health

    Issue, contributor and maintainer activity in greatscottgadgets/greatfet, 2023-12 – 2026-11, as of 2026-11-03. Twelve-month figures first; the trend lines run the whole window.

    1. Contributors 2 +1 vs prior 12 months
    2. Maintainers 2 +1 joined · −0 left, last 12 months
    3. Bus factor 1 committers behind half the commits
    4. Community-filed 33% of issues opened, last 12 months
    5. Median time to close 75 days first maintainer reply 55 days
    6. Open backlog 71 of 207 issues ever filed
    1. Issues opened / month 0 · 0 communitymaintainers
    2. Open backlog 71
    3. Contributors / month 0
    4. Commits / month 0
    5. Stars not measured
    Issue themes, last 12 months
    • bugs 33%
    • other 67%

    Counts from the project's public repository and git history; no individuals are identified. Maintainers are the committers covering 80% of the last year's commits. how we measure this

    Libraries its release ships

    What its latest release locks, checked against known advisories.

    None of its release's images build from a lockfile we can read.

    Add the badge to your README

    Maintain this project? The badge links readers straight to this page, so they can follow every release here.

    Tracked by Cyber Toolchain Choose a badge style and copy the code →
    Saved in this browser. Sign in to sync your tools.