PAGES
← all tools
◆ Hacking Hardware

Tigard

open-source

Free plan: not checked yet · Open source: yes

An FTDI FT2232H-based multi-protocol tool for hardware hacking.

What you can do now

Checking Plays…

Summary

Tigard is an open-source hardware hacking tool, built around the FTDI FT2232H chip, that gives you a single board for talking to a target's debug and communication interfaces: UARTUARTA hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack., SPISPISerial Peripheral Interface, a synchronous communication bus standard used to connect microcontrollers to sensors, flash memory, and other peripherals at short range; cyber tools use it to read or write firmware on embedded devices., I2C, JTAGJTAGA hardware debugging standard (IEEE 1149.1) that exposes a chip's internal state through a small set of pins, letting cyber tools read memory, set breakpoints, and flash firmware without touching the running OS., SWDSWDSerial Wire Debug, a two-pin ARM debug and programming interface that replaces JTAG on Cortex-M microcontrollers, letting cyber tools flash firmware or read memory with minimal hardware connections., and AVR ISP. It is a physical device you connect over USB rather than software you install, and it works with existing tools people already use for this work — OpenOCD and URJTAG for JTAG, flashrom and pyftdi for SPI and I2C, avrdude for AVR, iceprog for iCE40iCE40A family of low-power FPGAs made by Lattice Semiconductor, favored by cyber tools for its fully open-source synthesis toolchain, making it easy to deploy custom hardware logic without proprietary software. FPGAs — instead of introducing its own interface. Hardware features like directional level shifters, voltage-selection switches, and a logic analyser port point it at hardware hackers and embedded security researchers probing boards directly, rather than at software-only pentesting teams. Its README traces its heritage to the TIMEP project. It has been available since 2020.

An FTDI FT2232H-based multi-protocol tool for hardware hacking.

How Tigard helps

Which serial console is this target's UART actually exposed on?

connects a dedicated port over USB and presents it as a standard USB-serial device, so existing terminal and serial tools can talk to it directly

How do I read the contents of this board's SPI flash chip?

wires directly to the flash lines through its level shifters and hands the interface to flashrom, so the chip can be dumped without desoldering it

Can I attach a debugger to this chip's JTAG or SWD interface?

exposes the pins on its JTAG/CORTEX header and works with OpenOCD, so the target can be halted, stepped, and inspected like any other debug target

What is this microcontroller sending or receiving on its I2C bus?

shares its I2C lines with the SPI header behind a mode switch and lets libmpsse or pyftdi read and write the bus directly

How do I get new firmware onto this AVR chip without a dedicated programmer?

provides an AVR ISP connection that avrdude talks to directly, so the chip can be flashed from the same board used for the rest of the probing

Will this board run at the same voltage as the logic I'm probing?

a switch selects between 1.8, 3.3, 5.0v, or the target's own supply, and directional level shifters keep signals safe across that range instead of assuming one fixed voltage

all 4 features, with the evidence for each →

Languages

Not documented

Device

SecuringHardware.com Tigard
image © SecuringHardware.com · mirrored to the media CDN · original ↗

Spec · shipping Tigard

processor
FTDI FT2232HQ dual high speed USB to multipurpose UART/FIFO
interfaces
UART, SWD, JTAG, SPI, I2C, logic analyzer port
power
Level-shifters for 1.8 to 5.5 V; on-board 1.8 V, 3.3 V, 5.0 V or off-board vTarget
host interface
USB Type C high-speed (480 Mbps)

from the vendor's spec page ↗

from
$49
Tigard launch price
stock
not yet checked
vendor store not machine-readable
status
shipping
Tigard · announced Oct 30, 2020
latest firmware
no release in our archive yet
firmware releases reach this page as we publish them

Availability

announced
Oct 30, 2020
press
pre-order
not yet captured
no source captured
shipped
Apr 9, 2021
press
discontinued
still on sale

A slip is called out here the day the vendor's own delivery estimate moves past the promised window. A "coming" milestone is the vendor's own wording, read off the page it links to — never a date we inferred.

Price

configuration generation launch today status source
Tigard Tigard $49 $49 shipping launch price
no price captures yet

Device history

  1. Tigard shipped Apr 9, 2021 · source ↗ press

    Update reports nearly all campaign orders have shipped.

  2. Tigard news Dec 10, 2020 · source ↗ press

    Crowd Supply campaign funded with 1,818 backers.

  3. Tigard announced Oct 30, 2020 · source ↗ press

    Crowd Supply campaign went live.

Features

4 capabilities

Built from Tigard's releases, docs, README and our own runs. “Seen” marks the month we first spotted a release the vendor didn't date. Group names and tags are our labels.

Compare with peers →

What Tigard offers you

  • Command-line interface1
All capabilities 4 capabilities
JTAG and SWD debugging shipped Launches OpenOCD sessions for on-chip debugging and programming over JTAG and SWD interfaces. 2 other sources

example

  • Start OpenOCD for JTAG debugging openocd -f tigard-jtag.cfg
  • Start OpenOCD for SWD debugging openocd -f tigard-swd.cfg
Microcontroller and FPGA programming shipped Programs AVR microcontrollers via ISP and iCE40 FPGAs via flash programming. 2 other sources

example

  • Program AVR microcontroller avrdude -c tigard
  • Program iCE40 FPGA flash iceprog -I B yourbitstream.bin
SPI flash dumping shipped Reads and dumps the contents of SPI flash memory using flashrom. 2 other sources

Also counts toward: Command-line interface

docs

  • FTDI FT2232H-based multi-protocol hardware hacking tool supporting UART, SPI, I2C, JTAG, SWD, and AVR ISP interfaces.

example

  • Dump SPI flash with flashrom flashrom -p ft2232_spi:type=2232H,port=B,divisor=4
UART serial interface access shipped Connects to a target device's UART serial interface for communication and interaction. 2 other sources

docs

  • FTDI FT2232H-based multi-protocol hardware hacking tool supporting UART, SPI, I2C, JTAG, SWD, and AVR ISP interfaces.

example

  • Connect to UART serial interface screen /dev/ttyUSB0 115200

Lines in monospace are the tool's own words: help text parsed from its source, or an endpoint from its API document. Under release, a line is our summary of a dated release. Under docs, it is quoted from the tool's own documentation or website. Each links back to the source it came from.

Score card

  1. Shipping velocity releases a month, last 12 months
  2. Documentation quality release-notes rubric, 0–100
  3. Breaking-change discipline how rarely a release breaks users, and notice given
  4. Maintenance risk quiet time against its own cadence, maintainers
  5. Innovation & surface new capabilities, API and MCP surface
  6. Community health
  7. Contributor trend distinct committers, this year against last
  8. Maintainer concentration bus factor now against a year ago
  9. Issue backlog trend issues closed per issue opened, 12 months
  10. Responsiveness median time to a maintainer’s first reply

Nine scores for Tigard, each built from the releases, notes and API history this site tracks — and, on Researcher and Business, where it stands among every measured tool in its category and how that has moved.

Score cards are part of every paid plan.

See plans →

Each score is 0–100 on a published rubric, derived from data this site already shows. A dimension we cannot measure says so — it is never scored 0 and never enters a rank.

How this is scored
  • Shipping velocity — releases a month over the last 12 months, on a log scale where 16 a month scores 100. Needs 3 releases in the window.
  • Documentation quality — the release-notes rubric published on the analytics page, unchanged.
  • Breaking-change discipline — the share of releases carrying a breaking change (none scores 100, half or more scores 0). Only projects that label breaking changes are measured: a clean record cannot be told from an unlabelled one.
  • Maintenance risk — quiet time measured against the tool's own release cadence (quiet longer than 90 days and three typical gaps scores 0), plus the number of active maintainers and whether contributors are growing, where known. Higher is lower risk.
  • Innovation & surface — new capabilities in the feature ledger this year, API and MCP operations added, and the share of commits that are features: the mean of whichever we hold.
  • Community health (open-source tools only) — each is a direction, not a size: contributors this year against last, the bus factor now against a year ago, and issues closed per issue opened, where steady scores 50, doubled 100 and halved 0; plus the median time to a maintainer's first reply (an hour scores about 100, a month or more 0). A commercial card has no repository and carries none of the four.
  • Documented delivery (commercial tools) — when a vendor's documented new capabilities have slowed against its own baseline, that counts against the overall standing as heavily as two low dimensions. Steady delivery, or too little history to judge, leaves the standing alone; it is never a sixth score.
  • Open-source tools are scored on repository signals; commercial tools on their published changelog. Ranks compare tools within one category and one profile and need at least five measured peers; the overall standing needs three ranked dimensions. Best-in-breed or consolidator is a shape, not a quality, and is never scored.

Release-note detail over time

See how much detail Tigard puts in its release notes, quarter by quarter, and compare it with tracked tools in the same category. This history uses up to ten retained, reviewed notes per tool; sparse or blank older quarters may reflect that limit.

Checking release-note history…

Explore the full chart →

Releases

Nothing shipped since we started watching. Releases and docs updates land here as they happen.

last release May 29, 2026 · watching since Sep 25, 2026

Project health

Issue, contributor and maintainer activity in tigard-tools/tigard, 2023-12 – 2026-11, as of 2026-11-03. Twelve-month figures first; the trend lines run the whole window.

  1. Contributors 1 −1 vs prior 12 months
  2. Maintainers 0 +0 joined · −1 left, last 12 months
  3. Bus factor 0 committers behind half the commits
  4. Community-filed 100% of issues opened, last 12 months
  5. Median time to close 449 days first maintainer reply 20 days
  6. Open backlog 1 of 77 issues ever filed
  1. Issues opened / month 0 · 0 communitymaintainers
  2. Open backlog 1
  3. Contributors / month 0
  4. Commits / month 0
  5. Stars not measured
Issue themes, last 12 months
  • other 100%

Counts from the project's public repository and git history; no individuals are identified. Maintainers are the committers covering 80% of the last year's commits. how we measure this

Libraries its release ships

What its latest release locks, checked against known advisories.

None of its release's images build from a lockfile we can read.

Add the badge to your README

Maintain this project? The badge links readers straight to this page, so they can follow every release here.

Tracked by Cyber Toolchain Choose a badge style and copy the code →
Saved in this browser. Sign in to sync your tools.