Plays4. PlaysWhat you can do nowTo doDoneDismissedDeadlinesSince you lookedChecking Plays…Plays could not be checked. This does not mean there is nothing to do.Plays are held while the actionability and safety checks are measured.Personal Plays are held until the measured rollout checks pass.Deadline reminders are held until the measured rollout checks pass.Sign in to see Plays for your saved tools.Personal Plays and Deadlines are included with Practitioner, Researcher and Business.Sign inSee plansRetrySave a tool in Your stack to see Plays for it.We have not checked every saved tool yet. There is no all-clear to report.No new action was found in the checked release sources. Checked as ofNo published Plays for this tool in the last 90 days. This is not an all-clear for the version you run.No Plays in this view.No dated Plays for your saved tools.Why it mattersDo thisBefore you startEstimated effortEffort has not been measured.Read the sourceSource evidenceAct before it breaksNot for meRemind me next weekHidden from To do until next week.That change was not saved. Try again.Keep my Play answers in my accountOptional: save Done, Not for me and reminders privately in your account. Your tools are matched in this browser. No answers are sent until you opt in.Erase my Play answersYour Play answers and private calendar link have been erased.Create a private calendar linkReplace calendar linkRevoke calendar linkAnyone with this link can read generic deadline events. It contains no tool names, versions or answers. Revoke it any time.Private calendar feedWithin 30 daysWithin 7 daysPast the published dateMore than 30 days awayAct byNo earlier visit saved for this tool.breakingtotal Plays since your last reviewReview this toolMark this tool reviewedReview dates stay in this browser. Opening this list does not mark a tool reviewed.Category moves this monthThere is not enough documented history to call a category move this month.Category history is unavailable. No monthly comparison can be made.Category moves are held until the measured rollout checks pass.The documented monthly history shows no category move.What we got wrongThere are too few reviewed Plays to report a correction rate.Play corrections have not been measured for this month.Plays reviewedcorrectedPublished in the last 90 days. Breaking changes come first.Saved tools are matched in this browser; your versions are not sent.Your Plays{count} PlaysWhat you can do with the tools you runRelease sources for {checked} of {total} saved tools checked; no new plays match this edition.Add your toolsRead the details on the webIn {count} daysWe corrected {wrong} of {count} reviewed Plays.
Summary
Bruce is an open-source firmware for ESP32-based hardware, built to turn small handheld devices into portable red-team toolkits covering WiFi, Bluetooth, sub-GHz RF, NFCNFCNear Field Communication, a short-range (≤4 cm) wireless standard maintained by the NFC Forum, enabling data exchange between devices; cyber tools use it to probe, emulate, or intercept contactless card and tag transactions./RFID, and infrared attacks. It runs on M5Stack (Cardputer, Sticks, Cores), Lilygo (T-Deck, T-Embed), RockBase IoTIoTA collective label for internet-connected physical devices — sensors, cameras, routers, appliances — that tools target because they run embedded firmware with limited patching and broad network exposure., and Elecrow boards, and is installed by flashing a device via the project's web flasher, esptool.py, or M5Launcher/M5Burner, with a dedicated devkit called RF REAPER sold as purpose-built hardware for it. It is aimed at red teamers and hardware hackers who already work with Flipper Zero-style tools but want a cheaper, more modular alternative, a comparison the documentation itself draws by naming Flipper Zero as the reference point. Launched in 2024, it is an active, community-supported project with ongoing hardware and firmware development.
Predatory ESP32 firmware for M5Stack, Cardputer and LilyGo devices.
Which nearby networks can be pushed into disconnecting or reconnecting to a rogue access point?
broadcasts spoofed beacon frames and deauthentication packets over WiFi from the handheld device, letting an operator test client behavior against fake or hostile networks
What access cards or fobs in range can be read or cloned?
reads NFC/RFID tags over the built-in or attached reader and captures their data for replay or cloning
Can a remote or infrared-controlled device in the room be triggered without touching it?
sends stored or brute-forced infrared codes from the device to operate IR receivers such as TVs or other equipment
Is a given handheld capable of the same offensive checks as a Flipper Zero without buying dedicated hardware?
runs the WiFi, Bluetooth, sub-GHz, NFC/RFID, and infrared attack tools on cheaper modular ESP32 boards instead of requiring the RF REAPER or any single fixed device
Built from Bruce's releases, docs, README and our own runs.
“Seen” marks the month we first spotted a release the vendor didn't date.
Group names and tags are our labels.
+Offensive cyber toolchain firmware for ESP32 devicesshippedProvides ESP32 firmware packed with offensive cyber tools for Red Team operations, covering WiFi, BLE, RF, RFID, and IR capabilities on M5Stack and LILYGO hardware, with support for flashing the firmware directly to devices.23 releases · 3 other sources · first seen Jul 2024▸
release
23 total
Introduces Custom SubGhz UI revamp for RCSwitch signals and adds native KeeLoq protocol support
1.15 · May 2026
· source
· release history
Added Config>Dev mode section with options to change I2C device pins, UART pins, and GPS pins
1.11.1 · Sep 2025
· source
· release history
Adds support for Marauder Mini, v4, v6, v6.x, and v7 devices
1.10.1 · May 2025
· source
· release history
Adds support for AWOK Touch v2 and Awok Mini v2 devboards (screen firmware)
1.10.1 · May 2025
· source
· release history
ESP32 firmware packed with offensive cyber tools for Red Team operations, supporting WiFi, BLE, RF, RFID, IR, and more on M5Stack and LILYGO devices.
example
Deploy captive portal HTML templates for Evil Portal attacks on the target device.$ cp -r html/CaptivePortals/* /sdcard/
1.2.0 · Jul 2024
· source
Flash Bruce firmware to ESP32 device$ esptool.py --port /dev/ttyACM0 write_flash 0x00000 Bruce-<device>.bin
+Wi-Fi Network Scanning and MappingshippedPerform bulk WiFi surveys, upload data to WiGLE, capture EAPOL handshakes, and manage custom WiFi AP configurations for mapping or capture operations.10 releases · 1 other source · first seen Sep 2024▸
release
10 total
WiFi module now detects WPA3-PSK networks alongside existing WPA2/WPA3 detection.
1.16.1 · Aug 2026
· source
· release history
Adds the NetCut ARP feature under WiFi capabilities for network cut attacks inspired by Arcai.com
1.15 · May 2026
· source
· release history
Adds WDGoWars (wdgwars.pl) upload support for wardriving data collection workflows
1.15 · May 2026
· source
· release history
Adds show hidden wifi toggle for accessing hidden SSIDs
1.12 · Dec 2025
· source
· release history
Adds beacon_last_seen tracking and pruning for WiFi beacon frames
1.12 · Dec 2025
· source
· release history
Adds support for Ethernet Card and refactors WiFi attacks to work with any esp-netif interface
1.11 · Sep 2025
· source
· release history
example
Bulk upload WiFi survey data without manually selecting individual CSV files.$ In the Bruce UI, navigate to the WiFi section and select the 'Wigle Upload All' menu option.
1.5.1 · Sep 2024
· source
+RFID Cloning and EmulationshippedRead, write, scan, and emulate various RFID tag standards including ISO14443, ISO15693, EM4100, Mifare (including Ultralight), and Amiibolink via integrated or external modules.11 releases · first seen Oct 2024▸
release
11 total
Adds PN532 NDEF ISO/IEC 1443-4 Emulation support for RFID interactions
1.16 · Jul 2026
· source
· release history
Adds USB U2F/FIDO2 hardware support for the device
1.15 · May 2026
· source
· release history
Adds PN532 emulation mode for RFID cloning and simulation
1.15 · May 2026
· source
· release history
Adds BLE Reader support for PN532/PN532Killer and Standalone Control of Emulator
1.11 · Sep 2025
· source
· release history
Adds FeliCa support for RFID/NFC operations
1.10 · May 2025
· source
· release history
+RF Spectrum Analysis and JammingshippedAnalyze 2.4GHz spectrum, capture RF raw signals for replay, and perform active jamming against Wi-Fi and other 2.4GHz protocols.9 releases · first seen Aug 2024▸
release
9 total
Adds new RF capabilities: ProtoPirate integration into native RF with shared beta protocols, an RF waterfall SDR-style display, and an RF SquareWave scope trace with grid, X/Y axes, and scrollable capture.
1.17 · Nov 2026
· source
· release history
Improves RF: adds 36 new SubGHz protocol decoders, makes RF Scan/copy keep every capture in a selectable list, and overhauls the RF UI with theme-aware colour helpers, Channel Analyzer swept spectrum, NRF Spectrum continuous trace, RF Spectrum plot from the panel, Jam Detect shared spectrum view, and a shared…
1.17 · Nov 2026
· source
· release history
Add SDR raw I/Q takeover of the ESP32-S3 WiFi radio.
1.17 · Nov 2026
· source
· release history
Supports decoding of Keeloq RF protocol via the rf subsystem
1.16 · Jul 2026
· source
· release history
Adds spectogram visualization to subghz module
1.10 · May 2025
· source
· release history
+JavaScript Scripting and AutomationshippedExecute custom scripts via an embedded JavaScript interpreter with access to hardware GPIOs, random number generation, and analog/digital reading.7 releases · first seen Sep 2024▸
Also counts toward: JavaScript scripting support, Scripting runtime, Scripting API, Scripting language support
release
7 total
Adds compiled JavaScript support and a JavaScript UART API.
1.17 · Nov 2026
· source
· release history
Add 6 new display JS interpreter functions
1.14 · Feb 2026
· source
· release history
Startup App JS Interpreter Scripts + Input Masking + All Keyboards Available in JS
1.14 · Feb 2026
· source
· release history
Adds new JavaScript interpreter functions: random, analogWrite, digitalRead, and analogRead
1.8.1 · Jan 2025
· source
· release history
Adds a JS interpreter menu item for running scripts
1.6 · Oct 2024
· source
· release history
+Advanced Network Attack VectorsshippedExpand WiFi offensive capabilities to include specific network disruption techniques, hidden SSID discovery, and wardriving data integration.6 releases · first seen Sep 2025▸
release
Add native WiFite (WPS) app to the Wi-Fi menu.
1.17 · Nov 2026
· source
· release history
Adds WDGoWars (wdgwars.pl) upload support for wardriving data collection workflows
1.15 · May 2026
· source
· release history
Adds show hidden wifi toggle for accessing hidden SSIDs
1.12 · Dec 2025
· source
· release history
Adds beacon_last_seen tracking and pruning for WiFi beacon frames
1.12 · Dec 2025
· source
· release history
Adds MAC Management and MAC Spoofing implementation
1.11 · Sep 2025
· source
· release history
Adds Karma attack capability to WiFi module
1.11 · Sep 2025
· source
· release history
+NFC Protocol and Tag ExpansionshippedExtend NFC/RFID capabilities to include specific proprietary protocols, enhanced emulation modes, and support for additional secure element chips.5 releases · first seen May 2025▸
release
Adds PN532 emulation mode for RFID cloning and simulation
1.15 · May 2026
· source
· release history
Adds FeliCa support for RFID/NFC operations
1.10 · May 2025
· source
· release history
Adds PN532Killer support via UART for RFID operations
1.10 · May 2025
· source
· release history
Adds MFRC522 module support for RFID reading
1.10 · May 2025
· source
· release history
+BLE Communication and HID InjectionshippedShare files between devices over BLE and emulate BLE keyboards (Bad BLE) for wireless HID attacks.4 releases · first seen Oct 2024▸
release
Add Nordic UART Service (NUS) BLE bridge for serial commands.
1.17 · Nov 2026
· source
· release history
Adds Ninebot Scooter Tuning via BLE UART interface
1.10 · May 2025
· source
· release history
Enables file sharing between Bruce devices over BLE
1.6 · Oct 2024
· source
· release history
Adds BLE Rubber Ducky emulation mode (Bad BLE)
1.6 · Oct 2024
· source
· release history
+Wi-Fi Deauthentication and Handshake CaptureshippedExecute deauthentication attacks and capture EAPOL handshakes for offline cracking, integrated into the Wi-Fi attack suite.4 releases · first seen Oct 2024▸
release
Enhances WiFi Deauther with multi-band attack, storm mode, and mesh support
1.16 · Jul 2026
· source
· release history
Improves capture_handshake logic to wait for usable EAPOL frames before proceeding
1.13 · Dec 2025
· source
· release history
Adds a target network handshake grabber and deauther capability
1.12 · Dec 2025
· source
· release history
Enhances Brucegotchi with Handshake capture and deauth function
1.6.2 · Oct 2024
· source
· release history
+GPS PositioningshippedIntegrate GPS hardware to capture location data with configurable baud rates.4 releases · first seen Nov 2024▸
release
Added GPS>Config>GPS pins configuration to change rx/tx GPS pins
1.11.1 · Sep 2025
· source
· release history
Adds support for additional GPS Baudrates via configuration
1.8.1 · Jan 2025
· source
· release history
Adds GPS main menu and config to select gps baudrate
1.8 · Dec 2024
· source
· release history
Adds Kaseikyo Protocol (Custom IR) support for transmission
1.9 · Mar 2025
· source
· release history
Add IR Tx Repeats support to control signal repetition length
1.9 · Mar 2025
· source
· release history
+USB HID Attack EmulationshippedEmulate USB keyboards, mice, or rubber duckies to execute pre-scripted commands on connected hosts.3 releases · first seen Oct 2024▸
Also counts toward: Scripting language support
release
Enable DuckyScript DEFINE constant support in the BadUSB parser.
1.17 · Nov 2026
· source
· release history
Adds USB Mouse clicker functionality for devices with HID capabilities
1.8.1 · Jan 2025
· source
· release history
Extends BadUSB capability to StickCs and Core devices via CH9329
1.6 · Oct 2024
· source
· release history
+Companion App and Remote ControldocumentedProvides desktop (Linux, Windows, macOS) and Android apps for flashing firmware, running serial commands, and mirroring the device screen live, plus an iOS remote control app.2 other sources · first seen Oct 2026▸
docs
Companion Apps Bruce has two companion apps. They are separate projects with separate releases: Bruce App — desktop and Android. Flash firmware, run serial commands, and mirror the device screen live. Bruce Remote for IOS — iPhone.
docs update · Oct 2026
· source
Bruce App The Bruce App flashes the firmware from your desktop (Linux, Windows, macOS) or Android phone. See Companion Apps for downloads and install steps.
docs update · Oct 2026
· source
+LoRa Communication SupportshippedEnable wireless communication over LoRa frequencies, including text-based messaging interfaces and configurable transmission parameters.1 release · 1 other source · first seen Dec 2025▸
release
Adds LoRa keyboard chatting capabilities including username settings and frequency change controls
1.13 · Dec 2025
· source
· release history
example
Access the new LoRa chatting menu to send messages and adjust frequency.$ In the main menu, select 'LoRa' then 'Chatting'. Use the on-screen keyboard to enter your username or change the frequency.
1.13 · Dec 2025
· source
+Hardware Wire and Bus Diagnostic ToolsshippedProvides a Wire Tools menu with I2C serial commands, a continuity tester, a logic analyzer, a SUMP logic server, and an I2C bus discovery tool for diagnosing hardware interfaces.1 release · first seen Nov 2026▸
release
Add a Wire Tools menu with I2C serial commands, a continuity tester, logic analyzer, SUMP logic server, and I2C bus discovery tool.
1.17 · Nov 2026
· source
· release history
+Custom QR Code GenerationshippedGenerate and save custom QR codes for payload delivery or information sharing.1 release · first seen Jan 2025▸
+iButton Access Control SimulationshippedRead and write iButton data using compatible hardware interfaces.1 release · first seen Jan 2025▸
release
Adds default iButton Support for compatible hardware interfaces
1.8.1 · Jan 2025
· source
· release history
+Reverse Shell AccessshippedEstablish reverse shell connections over WiFi for remote command execution and control.1 release · first seen Dec 2024▸
release
Adds a reverse shell feature for WiFi operations
1.8 · Dec 2024
· source
· release history
+RFID Signal Scanning and AnalysisshippedPerform LF/HF scans, tag type checks (Gen3/Gen4 Magic), and full spectrum scans using Chameleon and PN532 modules.1 release · first seen Nov 2024▸
release
Adds Gen3/Gen4 Magic type check functionality on PN532 BLE devices.
1.7 · Nov 2024
· source
· release history
+Rogue Access Point and Evil Portal SimulationshippedDeploy captive portal HTML templates for phishing or network capture attacks, supporting custom AP configuration and multiple language portals.1 release · first seen Oct 2024▸
release
Allows configuring a Custom Wifi AP in bruce.conf
1.6.2 · Oct 2024
· source
· release history
Lines in monospace are the tool's own words: help text
parsed from its source, or an endpoint from its API document. Under
release, a line is our summary of a dated release. Under
docs, it is quoted from the tool's own documentation or
website. Each links back to the source it came from.
Command line
View
Source
No command matches.
load a captured run
composed command
No matchesTry a different search, or clear a filter to see more.
option surface across analysed releases
options at that releaseadded, per releaseremoved, per release
option
found in
since
description
No matchesTry a different search, or clear a filter to see more.
option changes per release — drag across the rail to set a range
→
Values are placeholders taken from each option’s declared default.
Nothing is executed here — the output shown is a recording of a run
that already happened.
Score card
Shipping velocityreleases a month, last 12 months
Documentation qualityrelease-notes rubric, 0–100
Breaking-change disciplinehow rarely a release breaks users, and notice given
Maintenance riskquiet time against its own cadence, maintainers
Innovation & surfacenew capabilities, API and MCP surface
Community health
Contributor trenddistinct committers, this year against last
Maintainer concentrationbus factor now against a year ago
Issue backlog trendissues closed per issue opened, 12 months
Responsivenessmedian time to a maintainer’s first reply
Nine scores for Bruce, each built from the releases, notes and API history this site tracks — and, on Researcher and Business, where it stands among every measured tool in its category and how that has moved.
Each score is 0–100 on a published rubric, derived from data this site already shows.
A dimension we cannot measure says so — it is never scored 0 and never enters a rank.
How this is scored
Shipping velocity — releases a month over the last 12 months, on a log scale where 16 a month scores 100. Needs 3 releases in the window.
Documentation quality — the release-notes rubric published on the analytics page, unchanged.
Breaking-change discipline — the share of releases carrying a breaking change (none scores 100, half or more scores 0). Only projects that label breaking changes are measured: a clean record cannot be told from an unlabelled one.
Maintenance risk — quiet time measured against the tool's own release cadence (quiet longer than 90 days and three typical gaps scores 0), plus the number of active maintainers and whether contributors are growing, where known. Higher is lower risk.
Innovation & surface — new capabilities in the feature ledger this year, API and MCP operations added, and the share of commits that are features: the mean of whichever we hold.
Community health (open-source tools only) — each is a direction, not a size: contributors this year against last, the bus factor now against a year ago, and issues closed per issue opened, where steady scores 50, doubled 100 and halved 0; plus the median time to a maintainer's first reply (an hour scores about 100, a month or more 0). A commercial card has no repository and carries none of the four.
Documented delivery (commercial tools) — when a vendor's documented new capabilities have slowed against its own baseline, that counts against the overall standing as heavily as two low dimensions. Steady delivery, or too little history to judge, leaves the standing alone; it is never a sixth score.
Open-source tools are scored on repository signals; commercial tools on their published changelog. Ranks compare tools within one category and one profile and need at least five measured peers; the overall standing needs three ranked dimensions. Best-in-breed or consolidator is a shape, not a quality, and is never scored.
Release-note detail over time
See how much detail Bruce puts in its release notes, quarter by quarter, and compare it with tracked tools in the same category. This history uses up to ten retained, reviewed notes per tool; sparse or blank older quarters may reflect that limit.
See whether Bruce's docs change before or after its release notes, release by release.
Documentation timing is included with Practitioner, Researcher and Business. When the docs come first, you can read about a change before it's announced.
We check each docs page on a fixed schedule, so every gap is a range rather than one number.
A release we can't place on either side is shown as "Can't tell".
What Bruce connects to, runs on and detects, read from its release notes and docs. So far: 13 new supported platforms, 2 new integrations, 1 new detection.
Show
16 changes, tracked since Nov 12, 2026.
Nov 122026
new36 new SubGHz protocol decoders
36 new SubGHz protocol decoders 5b58681b by @Mysteriza
Nothing first seen in this window. That doesn't mean Bruce shipped nothing, only that we found no record of it.
Changes per month New Updated Retired
2026-11
16
How we count
Read from 2 of 29 release notes and docs updates we hold for Bruce. "First seen" is the earliest note that names something; "last" is the latest. Our history may start partway through Bruce's life, so an old integration can show a recent first-seen date.
Each change counts once: "added 40 checks" is one line, so the numbers measure how often coverage moves, not how big the catalogue is or how well it detects.
Releases
Show
Coverage in all entries
29 entries
No entries match these filters.
November 20261
October 20262
August 20261
July 20261
May 20261
February 20261
December 20252
September 20252
May 20252
March 20252
January 20252
December 20241
November 20242
October 20243
September 20242
August 20243
July 20241
Project health
Issue, contributor and maintainer activity in BruceDevices/firmware, 2023-12 – 2026-11,
as of 2026-11-03. Twelve-month figures first; the trend lines run
the whole window.
Contributors62−5 vs prior 12 months
Maintainers10+5 joined · −7 left, last 12 months
Bus factor5committers behind half the commits
Community-filed100%of issues opened, last 12 months
Median time to close201 daysfirst maintainer reply 16 days
Open backlog183of 1,792 issues ever filed
Issues opened / month50 · 0communitymaintainers
Open backlog183
Contributors / month0
Commits / month0
Starsnot measured
Issue themes, last 12 months
bugs 7%
features 10%
questions 6%
docs 0%
other 77%
Counts from the project's public repository and git history; no individuals
are identified. Maintainers are the committers covering 80% of the last year's
commits. how we measure this
Libraries its release ships
What its latest release locks, checked against known advisories.
None of its release's images build from a lockfile we can read.
Add the badge to your README
Maintain this project? The badge links readers straight to this page, so they can
follow every release here.