PAGES
← all tools
◆ Hacking Hardware

ESP32 Marauder

v1.20.0 open-source

Free plan: not checked yet · Open source: yes

A suite of WiFi/Bluetooth offensive and defensive tools for the ESP32.

What you can do now

Checking Plays…

Summary

ESP32 Marauder is an open-source firmware suite that turns an ESP32 microcontroller into a set of WiFi and Bluetooth offensive and defensive tools, and it costs nothing beyond the hardware, though the project also sells compatible boards and accessories such as the Marauder Mini. It runs as firmware flashed directly onto the ESP32 device rather than as software on a laptop, with configuration and results handled through the device itself, and the wiki serves as the main reference for what it can do. It's aimed at people doing wardriving and wireless-network penetration testing with dedicated hardware rather than a phone or SDRSDRSoftware-defined radio: hardware that captures raw radio-frequency signals and shifts signal processing into software, letting a single device tune any frequency or protocol a program implements. setup, putting it in the hacking-hardware category alongside other ESP32-based cyber tools. Launched in 2019 and still active, with its most recent release only nine days old, it shows continued maintenance despite a modest release cadence.

A suite of WiFi/Bluetooth offensive and defensive tools for the ESP32.

How ESP32 Marauder helps

Which access points and clients are actually broadcasting in range right now?

scans WiFi channels continuously and lists SSIDs, BSSIDs, and connected stations as beacons and probe requests come in over the air

Which nearby devices are quietly probing for networks they used to connect to?

captures probe requests and shows the SSIDs each device is asking for, revealing past networks even when the device isn't associated to anything

Is someone running a deauthentication attack or rogue access point near this network?

includes detection modes that flag deauth frames and other WiFi attack traffic as they're seen, so the operator gets a warning on the device itself

Where was a given SSID physically seen while out walking or driving?

logs discovered networks with the data needed for wardriving, so a session's captures can be reviewed afterward to map where signals were picked up

Which Bluetooth devices are active in the area and what are they advertising?

scans Bluetooth Low Energy traffic and lists nearby devices with their advertised names and identifiers as they appear

Did a captured handshake actually contain the material needed to test a WiFi password offline?

sniffs and saves WPA handshakes to the device's storage, giving the operator a file to pull off and analyze later

all 27 features, with the evidence for each →

Languages

Not documented

Features

27 capabilities · 2 backed by code, an API document or a real run

Built from ESP32 Marauder's releases, docs, README and our own runs. “Seen” marks the month we first spotted a release the vendor didn't date. Group names and tags are our labels.

Compare with peers →

What ESP32 Marauder offers you

  • Command-line interface12
All capabilities 27 capabilities
WiFi and Bluetooth offensive and defensive operations shipped Provides a suite of cyber tools targeting WiFi and Bluetooth protocols, supporting both offensive and defensive operations on the ESP32 microcontroller. 33 releases · 2 other sources · first seen Aug 2020

release 33 total

  • Add FCC module IDs and station AP selection to identify regulatory module details and choose a target AP. v1.20.0 · Oct 2026 · source · release history
  • Add guided per-AP WiFi attack profiles to walk through targeted attacks against a selected access point. v1.20.0 · Oct 2026 · source · release history
  • Adds cross-hardware Recon mission mode enabling recon tasks across different hardware variants. v1.16.0 · Sep 2026 · source · release history
  • Add Channel Analyzer for non-touch screen marauder hardware v1.3.0 · Mar 2025 · source · release history
  • Adds support for the StickCPlus 2 hardware platform. v1.2.1 · Feb 2025 · source · release history
  • Adds Headless Mode for operation without a display v0.13.3 · Oct 2023 · source · release history

docs

  • Suite of WiFi/Bluetooth offensive and defensive cyber tools for the ESP32 microcontroller.

example

  • Run a targeted WiFi attack against a specific AP using the new guided per-AP attack profiles instead of broad channel attacks. On the device, go to WiFi > Attacks, select a scanned access point from the list, then choose an attack profile from the guided per-AP menu. v1.20.0 · Oct 2026 · source
Bluetooth Attack Capabilities shipped Executes various Bluetooth attacks including Sour Apple, Swiftpair spam, and BLE spam. 13 releases · 1 other source · first seen Oct 2023

Also counts toward: Command-line interface

release 13 total

  • Add Save/Load Airtag data functionality via the Save/Load file menu in Device menu v1.2.0 · Dec 2024 · source · release history
  • Adds Flipper Zero Sniff capability for interacting with Flipper Zero devices over BLE. v1.1.0 · Dec 2024 · source · release history
  • Adds List Airtag capability to enumerate detected Apple AirTags. v1.1.0 · Dec 2024 · source · release history
  • Adds Airtag Sniff capability for detecting nearby Apple AirTags via Bluetooth Low Energy. v1.1.0 · Dec 2024 · source · release history
  • Adds Spoof Airtag capability to send spoofed advertising signals mimicking Apple AirTags. v1.1.0 · Dec 2024 · source · release history
  • Adds Flipper Zero Spam capability to broadcast packets targeting Flipper Zero devices. v1.1.0 · Dec 2024 · source · release history

example

  • Execute all BLE spam methods via command line for comprehensive coverage during an assessment. blespamall v0.13.4 · Nov 2023 · source
GPS Integration and Wardriving shipped Integrates GPS hardware to log location data during WiFi and Bluetooth wardriving operations. 13 releases · first seen Dec 2022

Also counts toward: Command-line interface

release 13 total

  • Reduces no-PSRAM memory usage during wardriving on devices without PSRAM. v1.19.1 · Oct 2026 · source · release history
  • Upgrades wardrive logs to WiGLE 1.6 format. v1.19.0 · Oct 2026 · source · release history
  • Adds configurable wardrive geofences to restrict or define geographic boundaries for wardriving sessions. v1.17.0 · Sep 2026 · source · release history
  • Adds Continuous Bluetooth Wardrive operational mode v0.12.1 · Oct 2023 · source · release history
  • Adds Station Wardrive operational mode v0.12.1 · Oct 2023 · source · release history
  • Adds Bluetooth Wardrive operational mode v0.12.1 · Oct 2023 · source · release history
Access Point Selection and Filtering shipped Allows users to select, filter, and manage access points based on criteria such as signal strength, SSID, or BSSID. 9 releases · 2 other sources · first seen Jul 2022

Also counts toward: Command-line interface

release 9 total

example

  • Filter and select access points for further action based on specific criteria beyond just signal strength or SSID. select -f "criteria:value" v0.10.4 · May 2023 · source
  • Select target access points via the UI on Marauder Mini hardware In the Marauder Mini display, navigate to WiFi > General > Select APs v0.9.17 · Oct 2022 · source
CLI Command Interface verified Provides a command-line interface for controlling cyber tooling and executing operations via text commands. 6 releases · 2 other sources · first seen Jan 2020

Also counts toward: Command-line interface

release

  • Adds upload, foxhunt, and list bluetooth commands to the CLI v1.14.0 · Jul 2026 · source · release history
  • Add MAC Address CLI commands for interacting with hardware MAC addresses v1.9.0 · Dec 2025 · source · release history
  • samsungblespam CLI command added v0.13.5 · Nov 2023 · source · release history
  • Add ls <dir> command to CLI v0.10.6 · Jun 2023 · source · release history
  • Adds Basic CLI support for command-line interaction (more commands coming) v0.9.6 · May 2022 · source · release history
  • Adds over-the-air (OTA) firmware update capability accessible through a web interface. v0.4.0 · Jan 2020 · source · release history

command line

Evil Portal Attack shipped Deploys a rogue access point to capture credentials or deliver malicious content via captive portal pages. 8 releases · first seen Jul 2023

Also counts toward: Command-line interface

release 8 total

  • Adds setap CLI subcommand to specify the target AP when running Evil Portal from the command line. v1.8.2 · Jul 2025 · source · release history
  • Adds option to deauth clients while the Evil Portal captive portal is active. v1.8.2 · Jul 2025 · source · release history
  • Adds support for the ESP32-C5 flasher via a new binary release named _esp32c5_devkit.bin. v1.8.1 · Jul 2025 · source · release history
  • Supports cloning the MAC address of an existing Access Point to the local STA interface v1.4.0 · Apr 2025 · source · release history
  • Supports generating random MAC addresses for the Access Point interface v1.4.0 · Apr 2025 · source · release history
  • Allow Evil Portal HTML Files to be pulled from Flipper Zero SD v0.13.5 · Nov 2023 · source · release history
Hardware Compatibility List Update shipped Adds specific configuration and operational support for the Pancake C5 board, ESP32-C5 DevKit platform, and expands the existing list of supported hardware variants. 6 releases · first seen May 2021

release

  • Adds _esp32c5_devkit.bin firmware binary to support the ESP32-C5 DevKit platform with 5GHz capabilities. v1.14.1 · Aug 2026 · source · release history
  • Adds the Pancake C5 board (ESP32-C5, ST7796 320x480, FT6336 capacitive touch) v1.13.0 · Jul 2026 · source · release history
  • Provides _cyd_2432S028_2usb.bin binary for CYD 2432S028 2 USB devices v1.6.1 · May 2025 · source · release history
  • Adds build support for the CYD 2 USB hardware platform (ST7789 display) v1.6.1 · May 2025 · source · release history
  • Add ATmega32u4 check enables the tool to verify or configure ATmega32u4 hardware compatibility v0.9.0 · May 2021 · source · release history
  • Add ESP8266 check adds specific detection/validation logic for ESP8266-based devices v0.9.0 · May 2021 · source · release history
Raw WiFi Traffic Capture shipped Captures raw WiFi traffic data for external analysis using tools like Wireshark. 5 releases · first seen Oct 2022

release

  • Manual channel scrolling for non-touch sniffers v1.11.0 · Mar 2026 · source · release history
  • Adds Pinescan feature for enhanced wireless signal scanning v1.6.0 · May 2025 · source · release history
  • Adds -serial argument to all sniffing functions to forward PCAP data to Flipper Zero UART v0.13.7 · Feb 2024 · source · release history
  • Removes the separate bin for Flipper Zero SD serial; use _flipper.bin or the new -serial argument instead v0.13.7 · Feb 2024 · source · release history
  • Adds Raw Capture function to menu for capturing all WiFi traffic for Wireshark analysis v0.9.16 · Oct 2022 · source · release history
PMKID Sniffing and KRACK Analysis shipped Captures PMKIDs from specified access points to identify vulnerabilities related to the KRACK attack. 4 releases · 1 other source · first seen May 2023

Also counts toward: Command-line interface

release

  • Add GPS to Main Menu v1.8.5 · Sep 2025 · source · release history
  • Enables automatic connection using saved wifi credentials without manual entry v1.8.4 · Aug 2025 · source · release history
  • Adds join wifi <ssid> <passphrase> command to connect the device to a Wi-Fi network v1.7.0 · Jun 2025 · source · release history
  • Adds sniffpmkid -d -l for targeted active PMKID sniffing of selected access points v0.10.4 · May 2023 · source · release history

example

  • Sniff PMKIDs from specific access points identified by SSID or BSSID to identify those vulnerable to KRACK attacks. sniffpmkid -d -l "target-ssid" "target-bssid" v0.10.4 · May 2023 · source
Deauthentication Attacks shipped Enables targeted or broadcast deauthentication attacks against WiFi clients and access points. 4 releases · 1 other source · first seen Oct 2022

Also counts toward: Command-line interface

release

  • Adds sleep attack capability to disrupt client connections v1.8.4 · Aug 2025 · source · release history
  • Modifies the attack command to support targeted deauthentication attacks against specific, selected stations instead of only broadcast targets v0.10.0 · Dec 2022 · source · release history
  • Adds -d <dst_mac> argument to attack -t deauth to specify destination MAC address for deauthentication attacks v0.9.17 · Oct 2022 · source · release history
  • Adds attack -t deauth -s <src mac> CLI command to allow manual deauthentication with a specified source MAC address v0.9.16 · Oct 2022 · source · release history

example

  • Target a specific client MAC for deauthentication using the CLI attack -t deauth -d <dst_mac> v0.9.17 · Oct 2022 · source
WiFi Signal Monitoring shipped Provides a signal monitoring mode to observe WiFi signal levels in real-time. 3 releases · first seen May 2023

Also counts toward: Command-line interface

release

MAC Address Tracking shipped Tracks device locations over time using MAC address correlation and synchronizes data via Bluetooth Low Energy. 3 releases · first seen Jan 2026

Also counts toward: Command-line interface

release

  • Adds CLI command for MAC tracking operations v1.10.0 · Jan 2026 · source · release history
  • Adds MAC tracking backend to persist and correlate device locations v1.10.0 · Jan 2026 · source · release history
  • Adds BLE support for MAC tracking data synchronization v1.10.0 · Jan 2026 · source · release history
SAE Attack and Sniffing shipped Performs SAE flood attacks and captures WPA3 handshakes for analysis. 3 releases · first seen Jan 2026

Also counts toward: Command-line interface

release

Remote ID Detection shipped Scans for and displays Remote ID broadcasts from drones and operators, with configurable censoring of identity data and improved scan timing compatibility. 2 releases · first seen Oct 2026

release

  • Remote ID detection now has improved compatibility and scan timing. v1.20.0 · Oct 2026 · source · release history
  • Apply the Censor setting to Remote ID identifiers to mask operator and drone identity data during scans.⁠︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄⁠ v1.20.0 · Oct 2026 · source · release history
Marauder Mini v3 Support shipped Adds specific configuration support for the Marauder Mini v3 hardware variant. 2 releases · first seen Feb 2026

release

  • Supports IP5306 and MAX17048 battery fuel gauge ICs on V4/V6/V6.1 hardware. v1.19.0 · Oct 2026 · source · release history
  • Adds Marauder Mini v3 configuration support for compatible hardware v1.10.2 · Feb 2026 · source · release history
Seeed XIAO ESP32-C5 Support shipped Adds the Seeed XIAO ESP32-C5 as a supported hardware target, including a dedicated firmware binary and installer catalog aliases. 2 releases · first seen Oct 2026

release

  • Adds C5 hardware aliases to the installer catalog. v1.19.0 · Oct 2026 · source · release history
  • Adds Seeed XIAO ESP32-C5 as a supported hardware target with firmware binary _xiao_esp32c5.bin.⁠︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄⁠ v1.19.0 · Oct 2026 · source · release history
Wardriving Geofencing shipped Allows users to define geographic boundaries to restrict or guide wardriving sessions. 2 releases · first seen Sep 2026

release

  • Adds configurable wardrive geofences to restrict or define geographic boundaries for wardriving sessions. v1.17.0 · Sep 2026 · source · release history
  • Add configurable wardrove geofences v1.17.0 · Sep 2026 · source · release history
M5Stack Cardputer ADV Support shipped Adds support for the M5Stack Cardputer ADV board. 2 releases · first seen Apr 2026

release

  • Adds _esp32c5_devkit.bin firmware binary to support the ESP32-C5 DevKit platform with 5GHz capabilities. v1.14.1 · Aug 2026 · source · release history
  • Adds M5Stack Cardputer ADV board support v1.12.0 · Apr 2026 · source · release history
Bluetooth LE Support on C5 shipped Adds Bluetooth Low Energy operational support specifically for the C5 hardware platform. 2 releases · first seen Dec 2025

release

  • Adds the Pancake C5 board (ESP32-C5, ST7796 320x480, FT6336 capacitive touch) v1.13.0 · Jul 2026 · source · release history
  • Add Bluetooth support on C5 hardware v1.9.0 · Dec 2025 · source · release history
Apple RF Interactions shipped Executes specific radio frequency interactions targeting Apple devices. 2 releases · first seen May 2026

Also counts toward: Command-line interface

release

EAPOL Handshake Tracking shipped Enhances EAPOL sniffer capabilities to track and display the completion status of full EAPOL handshakes. 2 releases · first seen Feb 2026

release

  • Overhauls the EAPOL sniffer to track complete EAPOL handshakes v1.10.2 · Feb 2026 · source · release history
  • Updates AP Info view to show EAPOL completion status during sniffing v1.10.2 · Feb 2026 · source · release history
WiFi Profile Management shipped Enables storage of multiple WiFi network profiles and automatic scanning/connection to available saved networks. 1 release · first seen Sep 2026

release

  • Adds support for multiple saved WiFi profiles with scan-first selection, allowing the device to scan and choose from stored network profiles.⁠︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄⁠ v1.17.0 · Sep 2026 · source · release history
Cross-Hardware Recon Missions shipped Enables the execution of reconnaissance tasks that span multiple different hardware variants within a single coordinated operation. 1 release · first seen Sep 2026

release

  • Adds cross-hardware Recon mission mode enabling recon tasks across different hardware variants. v1.16.0 · Sep 2026 · source · release history
Session Management verified Provides mechanisms to define, track, and restore mission sessions using JSON configuration files and SD card storage. 1 other source · first seen Sep 2026

command line

M5 Nano C6 Support shipped Adds support for the M5 Nano C6 hardware platform. 1 release · first seen Jun 2026

release

WEP/Karma Attacks shipped Deploys a rogue access point configured with pre-computed WEP keys or multiple SSIDs to capture client association requests. 1 release · first seen Jul 2025

release

  • Adds karma attack capability for capturing client association requests. v1.8.2 · Jul 2025 · source · release history
Network Discovery shipped Performs network-level discovery via ARP, SSH, and Telnet scans to identify live hosts and services. 1 release · first seen Jun 2025

Also counts toward: Command-line interface

release

  • Adds ping_scan <ip_range> command to perform ICMP ping scans across a specified IP range v1.7.0 · Jun 2025 · source · release history

Lines in monospace are the tool's own words: help text parsed from its source, or an endpoint from its API document. Under release, a line is our summary of a dated release. Under docs, it is quoted from the tool's own documentation or website. Each links back to the source it came from.

Score card

  1. Shipping velocity releases a month, last 12 months
  2. Documentation quality release-notes rubric, 0–100
  3. Breaking-change discipline how rarely a release breaks users, and notice given
  4. Maintenance risk quiet time against its own cadence, maintainers
  5. Innovation & surface new capabilities, API and MCP surface
  6. Community health
  7. Contributor trend distinct committers, this year against last
  8. Maintainer concentration bus factor now against a year ago
  9. Issue backlog trend issues closed per issue opened, 12 months
  10. Responsiveness median time to a maintainer’s first reply

Nine scores for ESP32 Marauder, each built from the releases, notes and API history this site tracks — and, on Researcher and Business, where it stands among every measured tool in its category and how that has moved.

Score cards are part of every paid plan.

See plans →

Each score is 0–100 on a published rubric, derived from data this site already shows. A dimension we cannot measure says so — it is never scored 0 and never enters a rank.

How this is scored
  • Shipping velocity — releases a month over the last 12 months, on a log scale where 16 a month scores 100. Needs 3 releases in the window.
  • Documentation quality — the release-notes rubric published on the analytics page, unchanged.
  • Breaking-change discipline — the share of releases carrying a breaking change (none scores 100, half or more scores 0). Only projects that label breaking changes are measured: a clean record cannot be told from an unlabelled one.
  • Maintenance risk — quiet time measured against the tool's own release cadence (quiet longer than 90 days and three typical gaps scores 0), plus the number of active maintainers and whether contributors are growing, where known. Higher is lower risk.
  • Innovation & surface — new capabilities in the feature ledger this year, API and MCP operations added, and the share of commits that are features: the mean of whichever we hold.
  • Community health (open-source tools only) — each is a direction, not a size: contributors this year against last, the bus factor now against a year ago, and issues closed per issue opened, where steady scores 50, doubled 100 and halved 0; plus the median time to a maintainer's first reply (an hour scores about 100, a month or more 0). A commercial card has no repository and carries none of the four.
  • Documented delivery (commercial tools) — when a vendor's documented new capabilities have slowed against its own baseline, that counts against the overall standing as heavily as two low dimensions. Steady delivery, or too little history to judge, leaves the standing alone; it is never a sixth score.
  • Open-source tools are scored on repository signals; commercial tools on their published changelog. Ranks compare tools within one category and one profile and need at least five measured peers; the overall standing needs three ranked dimensions. Best-in-breed or consolidator is a shape, not a quality, and is never scored.

Release-note detail over time

See how much detail ESP32 Marauder puts in its release notes, quarter by quarter, and compare it with tracked tools in the same category. This history uses up to ten retained, reviewed notes per tool; sparse or blank older quarters may reflect that limit.

Checking release-note history…

Explore the full chart →

Releases

Show

70 entries

  1. October 20263
  2. September 20262
  3. August 20262
  4. July 20262
  5. June 20261
  6. May 20261
  7. April 20261
  8. March 20261
  9. February 20261
  10. January 20261
  11. December 20251
  12. November 20251
  13. October 20252
  14. September 20252
  15. August 20251
  16. July 20253
  17. June 20252
  18. May 20252
  19. April 20254
  20. March 20251
  21. February 20251
  22. December 20242
  23. June 20241
  24. April 20241
  25. February 20243
  26. December 20231
  27. November 20232
  28. October 20234
  29. September 20232
  30. July 20231
  31. June 20232
  32. May 20232
  33. April 20231
  34. January 20231
  35. December 20222
  36. October 20222
  37. August 20222
  38. July 20221
  39. May 20221
  40. July 20211
  41. May 20211
  42. August 20201
  43. January 20201
    Show

    70 entries

    Project health

    Issue, contributor and maintainer activity in justcallmekoko/ESP32Marauder, 2023-12 – 2026-11, as of 2026-11-03. Twelve-month figures first; the trend lines run the whole window.

    1. Contributors 19 +7 vs prior 12 months
    2. Maintainers 2 +1 joined · −1 left, last 12 months
    3. Bus factor 1 committers behind half the commits
    4. Community-filed 93% of issues opened, last 12 months
    5. Median time to close 149 days first maintainer reply 2.5 days
    6. Open backlog 94 of 886 issues ever filed
    1. Issues opened / month 18 · 10 communitymaintainers
    2. Open backlog 94
    3. Contributors / month 0
    4. Commits / month 0
    5. Stars not measured
    Issue themes, last 12 months
    • features 1%
    • other 99%

    Counts from the project's public repository and git history; no individuals are identified. Maintainers are the committers covering 80% of the last year's commits. how we measure this

    Libraries its release ships

    What its latest release locks, checked against known advisories.

    None of its release's images build from a lockfile we can read.

    Add the badge to your README

    Maintain this project? The badge links readers straight to this page, so they can follow every release here.

    Tracked by Cyber Toolchain Choose a badge style and copy the code →
    Saved in this browser. Sign in to sync your tools.