No entries match these filters. Clear filters
ESP32 Marauder adds framed SD file streaming over serial︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.21.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.21.0
ESP32 Marauder adds guided per-AP WiFi attack profiles, FCC module ID display, and Censor setting coverage for Remote ID Remote ID A broadcast standard mandated by aviation regulators (FAA in the US, EASA in Europe) that requires drones to continuously transmit their identity, location, and operator position over Wi-Fi or Bluetooth, enabling airspace monitoring. identifiers︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.20.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.20.0
└──▷ HOW TO FIND IT
Run a targeted WiFi attack against a specific AP using the new guided per-AP attack profiles instead of broad channel attacks.
📍 On the device, go to WiFi › Attacks, select a scanned access point from the list, then choose an attack profile from the guided per-AP menu.
Apply the Censor setting to Remote ID identifiers to mask operator and drone identity data during scans.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Add guided per-AP WiFi attack profiles to walk through targeted attacks against a selected access point. Not checked yet Add FCC module IDs and station AP selection to identify regulatory module details and choose a target AP. Not checked yet Remote ID detection now has improved compatibility and scan timing. Not checked yet
Apply the Censor setting to Remote ID identifiers to mask operator and drone identity data during scans.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Add guided per-AP WiFi attack profiles to walk through targeted attacks against a selected access point. Not checked yet
2 more in Everything
ESP32 Marauder v1.19.1 adds M5Stack Core2 for AWS and Waveshare ESP32-C5-Touch-LCD-3.5 hardware ports.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.19.1 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.19.1
Reduces no-PSRAM memory usage during wardriving on devices without PSRAM. Not checked yet
1 more in Everything
ESP32 Marauder v1.19.0 adds Seeed XIAO ESP32-C5 support, CSI CSI An ambiguous abbreviation — it most commonly means Container Storage Interface (a Kubernetes storage plugin standard) or Crime Scene Investigation — without more context the correct meaning cannot be determined reliably. motion monitor, display censoring, and WiGLE WiGLE A crowdsourced database and website that maps wireless networks and cell towers worldwide, collected by volunteers wardriving. Cyber tools use it to geolocate networks by BSSID or SSID during reconnaissance. 1.6 wardrive logs.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.19.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.19.0
Adds Seeed XIAO ESP32-C5 as a supported hardware target with firmware binary _xiao_esp32c5.bin.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Upgrades wardrive logs to WiGLE 1.6 format. Not checked yet Supports IP5306 and MAX17048 battery fuel gauge ICs on V4/V6/V6.1 hardware. Not checked yet Adds C5 hardware aliases to the installer catalog. Not checked yet
Adds Seeed XIAO ESP32-C5 as a supported hardware target with firmware binary _xiao_esp32c5.bin.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Supports IP5306 and MAX17048 battery fuel gauge ICs on V4/V6/V6.1 hardware. Not checked yet
2 more in Everything
ESP32 Marauder v1.17.0 adds multiple saved WiFi profiles with scan-first selection and configurable wardrive geofences.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.17.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.17.0
Adds support for multiple saved WiFi profiles with scan-first selection, allowing the device to scan and choose from stored network profiles.︀︄︇︀︅︉︀︅︀︀︃︀︀︅︅︀︅︊︀︄︆︀︃︄ Not checked yet Adds configurable wardrive geofences to restrict or define geographic boundaries for wardriving sessions. Not checked yet
2 details in Everything
ESP32 Marauder v1.16.0 adds cross-hardware Recon mission mode, SD file deletion browser, and SPIFFS backup/restore capability.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.16.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.16.0
Adds a machine protocol for SPIFFS migration that allows backing up SPIFFS content to the SD card before wiping flash. Not checked yet Restores SPIFFS content from an SD backup via the new migration mechanism. Not checked yet Adds cross-hardware Recon mission mode enabling recon tasks across different hardware variants. Not checked yet Adds a traversable SD file deletion browser for nested browsing and multi-file deletion on the device. Not checked yet Adds Mini v3 Packet Monitor graphs to visualize packet data directly on the Mini v3 display. Not checked yet
5 details in Everything
└──▷ BREAKING ON UPGRADE
! The partition scheme for the firmware has changed; updating to v1.16.0 requires overwriting the entire flash of the ESP32 device, which wipes the settings file.
Adds LilyGo T-Dongle C5 CLI hardware target and stable sort/filter controls to fox hunt lists
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.15.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.15.0
ESP32 Marauder v1.14.1 adds firmware binary for the ESP32-C5 DevKit enabling 5GHz Wi-Fi support.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.14.1 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.14.1
ESP32 Marauder v1.14.0 adds upload, foxhunt, and findmy sound commands plus direct upload support.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.14.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.14.0
ESP32 Marauder v1.13.0 adds Bluetooth Fox Hunt and Pancake C5 board support
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.13.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.13.0
Adds the Pancake C5 board (ESP32-C5, ST7796 320x480, FT6336 capacitive touch) Not checked yet
1 detail in Everything
Adds M5 Nano C6 hardware support and increases NimBLE output power
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.12.2 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.12.2
Adds support for the M5 Nano C6 hardware platform Not checked yet Increases output power for NimBLE operations Not checked yet
2 details in Everything
ESP32 Marauder v1.12.1 adds Apple Juice CLI command and channel hopping for Flock sniffing
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.12.1 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.12.1
Add apple_juice CLI command for Apple-specific RF interactions Not checked yet Add Channel Hop capability to the Flock Sniff feature Not checked yet
2 details in Everything
ESP32 Marauder v1.12.0 adds channel hopping to Signal Monitor, new Flock-based elicitation capabilities, and M5Stack Cardputer ADV support.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.12.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.12.0
Enables channel hopping for the Signal Monitor feature Not checked yet Adds OUI filtering for Flock Detection Not checked yet Adds wardrove channel weighting Not checked yet Adds Marauder AP information view Not checked yet Adds Host AP info display showing connection events Not checked yet
+3 more
show less
Adds Wardrive-based Flock transmission elicitation Not checked yet Enables packet rate saving to PCAPs PCAPs A packet capture, recorded network packets that can be inspected later. Analysts use it to reconstruct communication and investigate protocol behavior or suspicious traffic. Not checked yet Adds M5Stack Cardputer ADV board support Not checked yet
8 details in Everything
Adds channel switch announcement and quiet time attacks, meta device scanning, CLI commands, PWM brightness control, and new hardware binaries.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.11.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.11.0
Add channel switch announcement attack Not checked yet Add quiet time attack Not checked yet Add scan for meta devices Not checked yet Add build config for dual mini c5 Not checked yet Add BT callback check for wardriving Not checked yet
+2 more
show less
toggle channel hop for beacon sniff Not checked yet Manual channel scrolling for non-touch sniffers Not checked yet
7 details in Everything
└──▷ BREAKING ON UPGRADE
! Reformat of settings to default values when updating.
ESP32 Marauder v1.10.2 adds Marauder Mini v3 support and overhauls EAPOL sniffer with complete tracking.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.10.2 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.10.2
Adds Marauder Mini v3 configuration support for compatible hardware Not checked yet Overhauls the EAPOL sniffer to track complete EAPOL handshakes Not checked yet Updates AP Info view to show EAPOL completion status during sniffing Not checked yet
3 details in Everything
ESP32 Marauder v1.10.0 adds MAC tracking backend, SAE sniff/attack commands, and BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. support for tracking.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.10.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.10.0
Adds MAC tracking backend to persist and correlate device locations Not checked yet Adds CLI command for MAC tracking operations Not checked yet Adds BLE support for MAC tracking data synchronization Not checked yet Adds SAE sniff capability for WPA3 WPA3 The third generation of the Wi-Fi Protected Access authentication and encryption standard, maintained by the Wi-Fi Alliance, offering stronger handshake protection and per-session encryption compared to WPA2. handshake capture Not checked yet Adds SAE flood attack functionality Not checked yet
+1 more
show less
Adds dedicated commands for SAE sniff and SAE attack workflows Not checked yet
6 details in Everything
ESP32 Marauder v1.9.0 adds Flock scanning/wardriving, MAC address MAC address A hardware-address identifier used on a local network, such as Ethernet or Wi-Fi. It identifies a network interface for delivery on that link, rather than routing across the internet. CLI commands, and ESP32-C5 5GHz packet injection.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.9.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.9.0
Add Flock penguin battery scanner capability via the /wiki/flock-sniff wiki page Not checked yet Add Flock WiFi sniffing capability via the /wiki/flock-sniff wiki page Not checked yet Add MAC Address CLI commands for interacting with hardware MAC addresses MAC addresses A hardware-address identifier used on a local network, such as Ethernet or Wi-Fi. It identifies a network interface for delivery on that link, rather than routing across the internet. Not checked yet Add Flock wardriving capability via the /wiki/flock-wardrive wiki page Not checked yet Add Bluetooth support on C5 hardware Not checked yet
+1 more
show less
Add 5ghz channels support for packet injection on C5 hardware Not checked yet
6 details in Everything
v1.8.10 adds a channel summary graph and allows CLI control of GPS pins on CYD hardware.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.8.10 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.8.10
Change GPS pins for CYDs to allow CLI control Not checked yet
1 detail in Everything
ESP32 Marauder v1.8.9 adds Airtag Monitor and firmware update UI
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.8.9 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.8.9
Adds Airtag Monitor capability for tracking nearby AirTags Not checked yet Allows selecting a binary file from a list to update firmware Not checked yet
2 details in Everything
v1.8.7 adds GPS POI CLI commands, new port scans, softAP WiFi feature, and CYD 3.5inch support.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.8.7 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.8.7
Adds new port scans capability via CLI Not checked yet Adds softAP to wifi general scanning Not checked yet Adds support for CYD 3.5inch hardware Not checked yet
3 details in Everything
ESP32 Marauder v1.8.6 adds port scan presets and SSID beacon spam attacks
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.8.6 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.8.6
Adds new port scan presets to the tool. Not checked yet Adds a Funny SSID Beacon Spam Attack capability for generating SSIDs. Not checked yet
2 details in Everything
Adds GPS integration to the main menu and enables LED support for C5 DevKit hardware.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.8.5 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.8.5
Add GPS to Main Menu Not checked yet
1 detail in Everything
ESP32 Marauder v1.8.4 adds sleep, ARP ARP A network protocol that maps IP addresses to MAC addresses on a local Ethernet segment, letting tools resolve layer-3 targets to layer-2 hardware addresses for packet crafting or host discovery. , SSH, and Telnet scanning with saved WiFi join support.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.8.4 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.8.4
Adds sleep attack capability to disrupt client connections Not checked yet Adds network discovery via ARP scan , SSH scan , and Telnet scan modules Not checked yet Enables automatic connection using saved wifi credentials without manual entry Not checked yet
3 details in Everything
ESP32 Marauder v1.8.2 adds Karma attack, GPS tracker, setap CLI command, and Malformed EAPoL Message 1 detection
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.8.2 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.8.2
Adds karma attack capability for capturing client association requests. Not checked yet Adds GPS tracker feature for logging device location data. Not checked yet Adds setap CLI subcommand to specify the target AP when running Evil Portal from the command line. Not checked yet Adds option to deauth clients while the Evil Portal captive portal is active. Not checked yet Adds Malformed EAPoL Message 1 detection mode (Advanced deauth) triggered when its install flag is set. Not checked yet
5 details in Everything
Adds ESP32-C5 flasher support with dedicated _esp32c5_devkit.bin for Marauder on C5 hardware
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.8.1 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.8.1
Adds support for the ESP32-C5 flasher via a new binary release named _esp32c5_devkit.bin. Not checked yet Enables 5GHz Wi-Fi scanning capabilities through the new ESP32-C5 hardware integration. Not checked yet
2 details in Everything
Adds captive endpoints redirection to index.html for Marauder device
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.7.2 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.7.2
ESP32 Marauder v1.7.1 adds ability to select SSIDs from Probe Request Sniff
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.7.1 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.7.1
Adds join wifi, ping scan, scan tcp, and shutdown wifi CLI commands with PMKID PMKID A 128-bit identifier derived from a PMK, the access point MAC, and the client MAC in WPA2 handshakes, allowing offline cracking of Wi-Fi passwords without capturing a full four-way handshake. status icons
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.7.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.7.0
Adds join wifi <ssid> <passphrase> command to connect the device to a Wi-Fi network Not checked yet Adds ping_scan <ip_range> command to perform ICMP ICMP A network-layer protocol in the TCP/IP suite used by devices to send error messages and operational diagnostics, such as unreachable hosts or TTL expiry; cyber tools use it for host discovery and path tracing. ping scans across a specified IP range Not checked yet Adds scan_tcp <host> <ports> command to perform TCP TCP A network protocol that delivers a reliable, ordered stream of bytes between two endpoints. It detects lost data and retransmits it. port scanning on target hosts Not checked yet Adds shutdown_wifi command to disable the Wi-Fi radio via CLI Not checked yet Adds status bar icons for Force PMKID detection and current Wi-Fi connection status Not checked yet
5 details in Everything
Adds firmware support for CYD 2 USB hardware with ST7789 display
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.6.1 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.6.1
Adds build support for the CYD 2 USB hardware platform (ST7789 display) Not checked yet Provides _cyd_2432S028_2usb.bin binary for CYD 2432S028 2 USB devices Not checked yet
2 details in Everything
ESP32 Marauder v1.6.0 adds Pinescan and MultiSSID detection capabilities
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.6.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.6.0
Adds Pinescan feature for enhanced wireless signal scanning Not checked yet Adds MultiSSID feature for detecting multiple SSIDs Not checked yet
2 details in Everything
ESP32 Marauder v1.4.6 adds CYD 2432S024 support and evil portal AP name exposure
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.4.6 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.4.6
Adds CYD 2432S024 GUITION hardware port for ESP32 Marauder Not checked yet
1 detail in Everything
Adds support and build for CYD 2432S028(R) hardware variant
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.4.5 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.4.5
Port ESP32 Marauder to CYD 2432S028(R) Not checked yet
1 detail in Everything
ESP32 Marauder v1.4.3 adds WPS and Manufacturer checks to AP scans.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.4.3 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.4.3
Adds WPS check for AP scan Not checked yet Adds Manufacturer check for AP scan Not checked yet
2 details in Everything
ESP32 Marauder v1.4.0 adds Info command, packet count, AP/STA MAC cloning and ILI9341 channel analyzer
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.4.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.4.0
Adds info command to display device and network status Not checked yet Adds a packet count function for monitoring captured frames Not checked yet Adds AP info view with Wi-Fi details like SSID, BSSID, RSSI, and encryption type Not checked yet Supports generating random MAC addresses MAC addresses A hardware-address identifier used on a local network, such as Ethernet or Wi-Fi. It identifies a network interface for delivery on that link, rather than routing across the internet. for the Access Point interface Not checked yet Supports cloning the MAC address MAC address A hardware-address identifier used on a local network, such as Ethernet or Wi-Fi. It identifies a network interface for delivery on that link, rather than routing across the internet. of an existing Access Point to the local STA interface Not checked yet
+2 more
show less
Supports cloning the MAC address of an existing Station to the local AP interface Not checked yet Adds a channel analyzer feature to ILI9341 devices with channel and exit buttons for raw capture Not checked yet
7 details in Everything
└──▷ BREAKING ON UPGRADE
! The Scan AP and Scan Sta menu options have been removed from ILI9341 devices
Adds Channel Analyzer and BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. Analyzer for non-touch hardware in v1.3.0
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.3.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.3.0
Adds StickCPlus 2 port and workflow enhancements
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.2.1 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.2.1
Adds support for the StickCPlus 2 hardware platform. Not checked yet Enhances the workflow for supported devices. Not checked yet
2 details in Everything
ESP32 Marauder v1.2.0 adds v7 config support, MAX17048 battery gauge integration, and Airtag data save/load capabilities
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.2.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.2.0
Add configuration for ESP32 Marauder v7 to support the new hardware variant Not checked yet Add MAX17048 Battery Fuel Gauge modification for improved power monitoring Not checked yet Add Save/Load Airtag data functionality via the Save/Load file menu in Device menu Not checked yet
3 details in Everything
ESP32 Marauder v1.1.0 adds Airtag and Flipper Zero BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. attack capabilities
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.1.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.1.0
Adds Airtag Sniff capability for detecting nearby Apple AirTags via Bluetooth Low Energy. Not checked yet Adds Flipper Zero Sniff capability for interacting with Flipper Zero devices over BLE. Not checked yet Adds Flipper Zero Spam capability to broadcast packets targeting Flipper Zero devices. Not checked yet Adds List Airtag capability to enumerate detected Apple AirTags. Not checked yet Adds Spoof Airtag capability to send spoofed advertising signals mimicking Apple AirTags. Not checked yet
5 details in Everything
Adds Select Stations menu option for Marauder Mini hardware.
└──▷ GET THIS VERSION
copy
$ git clone --branch v1.0.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v1.0.0
Adds Save SSIDs , Load SSIDs , Save APs , and Load APs commands to ESP32 Marauder for managing saved WiFi data.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.13.10 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.13.10
Adds Save SSIDs menu and command Not checked yet Adds Load SSIDs menu and command Not checked yet Adds Save APs menu and command Not checked yet Adds Load APs menu and command Not checked yet
4 details in Everything
v0.13.9 adds SD file removal for Mini devices and support for Adafruit ESP32-S2 Reverse Feather hardware.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.13.9 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.13.9
Adds a dedicated Marauder Mini keyboard for injecting custom SSIDs
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.13.8 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.13.8
Adds -serial argument to sniffing functions for Flipper Zero UART UART A hardware protocol for serial communication between devices, transmitting data one bit at a time over two wires. Cyber tools use it to access embedded device consoles and debug interfaces without a network stack. forwarding
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.13.7 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.13.7
└──▷ BREAKING ON UPGRADE
! Removes the separate bin for Flipper Zero SD serial; use _flipper.bin or the new -serial argument instead
ESP32 Marauder v0.13.6 adds Google BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. Spam and NMEA GPS streaming capabilities.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.13.6 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.13.6
Adds a Google BLE Spam menu option for broadcasting BLE spam messages targeting Google devices Not checked yet Adds an NMEA Stream menu option that streams raw GPS data over the Serial interface Not checked yet Unifies all BLE spam options under the single command blespam -t <apple/google/samsung/windows/all> Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! The individual BLE spam menu options are consolidated; users must now use the blespam -t <target> command instead of separate options for Apple, Samsung, Windows, etc.
Adds samsungblespam CLI command and Samsung BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. Spam menu option to ESP32 Marauder v0.13.5
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.13.5 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.13.5
samsungblespam CLI command added Not checked yet [Samsung BLE Spam](https://github.com/justcallmekoko/ESP32Marauder/wiki/samsung-ble-spam) menu option added Not checked yet Allow Evil Portal HTML Files to be pulled from Flipper Zero SD Not checked yet
3 details in Everything
ESP32 Marauder v0.13.4 adds BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. Spam All menu item and blespamall CLI command
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.13.4 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.13.4
└──▷ TRY IT
Execute all BLE spam methods via command line for comprehensive coverage during an assessment.
Adds blespamall Marauder CLI command to execute all included methods of BLE spam Not checked yet Adds BLE Spam All menu item in the UI to trigger comprehensive Bluetooth Low Energy spoofing Not checked yet
2 details in Everything
Adds Headless Mode and enhanced Bluetooth capabilities for LDDB hardware to ESP32 Marauder
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.13.3 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.13.3
Adds Headless Mode for operation without a display Not checked yet Adds Pwnscan menu option for Mini and M5Stick-C Plus devices Not checked yet
2 details in Everything
Adds Swiftpair Spam menu option and CLI command, plus sethtml subcommand for evilportal
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.13.2 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.13.2
Adds switfpair CLI command to send Swiftpair spam attacks Not checked yet Adds sethtml subcommand for evilportal to select HTML files from SD card Not checked yet
2 details in Everything
Adds Sour Apple Bluetooth attack and dedicated CLI command to ESP32 Marauder v0.13.0
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.13.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.13.0
Adds sourapple CLI command to execute the Sour Apple Bluetooth attack via the tool's command-line interface Not checked yet Adds a Sour Apple Bluetooth attack menu option in the device UI Not checked yet
2 details in Everything
Adds GPS support for Marauder Mini, station/bt wardriving modes, and CLI args
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.12.1 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.12.1
wardrive command now supports -s flag for station wardriving Not checked yet Adds GPS hardware support for Marauder Mini devices Not checked yet Adds Station Wardrive operational mode Not checked yet Adds Bluetooth Wardrive operational mode Not checked yet Adds Continuous Bluetooth Wardrive operational mode Not checked yet
+1 more
show less
Adds CLI command interface for initiating Bluetooth wardriving Not checked yet
6 details in Everything
└──▷ BREAKING ON UPGRADE
! Removes Detect pwnagotchi functionality
Adds a wardrive menu option and CLI command with an increased history limit
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.12.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.12.0
Adds the wardrive menu option and corresponding CLI command for wardriving operations. Not checked yet Increases the history limit for the Wardriver feature. Not checked yet
2 details in Everything
ESP32 Marauder v0.11.0 adds GPS module interface with gpsdata command and status bar satellite count.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.11.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.11.0
Adds GPS module interface support for ESP32 Marauder v4(OG) , v6, Kit, Flipper Zero WiFi Dev Board, and WiFi Dev Board Pro Not checked yet Adds gpsdata CLI command to retrieve GPS information Not checked yet Adds GPS Satellite count display in the status bar when a GPS module is installed Not checked yet
3 details in Everything
└──▷ BREAKING ON UPGRADE
! The join command and Join WiFi menu option have been removed.! The Shutdown WiFi and Shutdown Bluetooth menu options have been removed.! The Draw menu option has been removed.! The temperature reading has been removed from the status bar.
ESP32 Marauder v0.11.0-RC1 adds Remote OTA Update and Evil Portal attack capability.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.11.0-RC1 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.11.0-RC1
Adds Remote OTA Update capability for firmware updates Not checked yet Adds Evil Portal attack mode, requiring an SD card attachment Not checked yet
2 details in Everything
Adds led command for controlling neopixel LEDs on supported hardware
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.10.8 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.10.8
Adds led command Not checked yet
1 detail in Everything
Adds ls CLI subcommand to list SD card directory contents
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.10.6 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.10.6
Add ls <dir> command to CLI Not checked yet
1 detail in Everything
ESP32 Marauder v0.10.5 adds sigmon command and M5StickC Plus support
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.10.5 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.10.5
Adds sigmon command for signal monitoring workflow Not checked yet Adds Signal Monitor to the ESP32 Marauder menu interface Not checked yet Adds compatibility and precompiled binaries for M5StickC Plus hardware Not checked yet
3 details in Everything
ESP32 Marauder v0.10.4 adds targeted PMKID PMKID A 128-bit identifier derived from a PMK, the access point MAC, and the client MAC in WPA2 handshakes, allowing offline cracking of Wi-Fi passwords without capturing a full four-way handshake. sniffing via sniffpmkid, a join command, and enhanced CLI output.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.10.4 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.10.4
└──▷ TRY IT
Sniff PMKIDs from specific access points identified by SSID or BSSID to identify those vulnerable to KRACK attacks.
copy
$ sniffpmkid -d -l "target-ssid" "target-bssid"
Filter and select access points for further action based on specific criteria beyond just signal strength or SSID.
copy
$ select -f "criteria:value"
Adds sniffpmkid -d -l for targeted active PMKID sniffing of selected access points Not checked yet Adds new join WiFi command Not checked yet Adds -f switch to the select command for additional selection criteria Not checked yet Shows number of selected APs during target selection in CLI output Not checked yet Shows channel of scanned APs when executing list command Not checked yet
+1 more
show less
Displays SD Serial status on the logo screen in CLI Not checked yet
6 details in Everything
v0.10.3 allows AP ESSIDs with spaces and fixes Flipper SD serial
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.10.3 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.10.3
Adds hardware support for the WiFi Dev Board Pro.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.10.1 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.10.1
Adds scan sta and select sta commands for targeted deauth attacks against specific stations
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.10.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.10.0
Adds a new command to scan for WiFi stations (clients) and select them by name or address Not checked yet Modifies the attack command to support targeted deauthentication attacks against specific, selected stations instead of only broadcast targets Not checked yet
2 details in Everything
v0.9.19 adds LED control settings and Flipper Zero Multi Board S3 support
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.9.19 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.9.19
Adds led.enable and led.disable settings to control the hardware LED Not checked yet Adds Flipper Zero Multi Board S3 board support for ESP32 Marauder Not checked yet
2 details in Everything
v0.9.17 adds attack -t deauth -d <dst_mac> CLI flag and Marauder Mini Select APs UI menu
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.9.17 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.9.17
└──▷ TRY IT
Target a specific client MAC for deauthentication using the CLI
copy
$ attack -t deauth -d <dst_mac>
Select target access points via the UI on Marauder Mini hardware
📍 In the Marauder Mini display, navigate to WiFi › General › Select APs
Adds -d <dst_mac> argument to attack -t deauth to specify destination MAC address MAC address A hardware-address identifier used on a local network, such as Ethernet or Wi-Fi. It identifies a network interface for delivery on that link, rather than routing across the internet. for deauthentication attacks Not checked yet Adds Select APs option in the WiFi General menu on Marauder Mini for targeting specific access points Not checked yet
2 details in Everything
Adds Raw Capture menu function and manual deauth source MAC targeting via attack -t deauth -s.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.9.16 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.9.16
Adds Raw Capture function to menu for capturing all WiFi traffic for Wireshark analysis Not checked yet Adds attack -t deauth -s <src mac> CLI command to allow manual deauthentication with a specified source MAC address MAC address A hardware-address identifier used on a local network, such as Ethernet or Wi-Fi. It identifies a network interface for delivery on that link, rather than routing across the internet. Not checked yet
2 details in Everything
Adds settings command switches and RSSI data to AP scanning.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.9.13 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.9.13
Adds settings command switches for configuration management Not checked yet Adds RSSI field to AP scanning output and characteristic Not checked yet
2 details in Everything
└──▷ BREAKING ON UPGRADE
! The settings -s command requires a format reset via settings -r, which resets current settings to the new format.
v0.9.12 adds the settings command and SD card PCAP PCAP A packet capture, recorded network packets that can be inspected later. Analysts use it to reconstruct communication and investigate protocol behavior or suspicious traffic. save support on Flipper Zero WiFi Dev Board
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.9.12 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.9.12
└──▷ HOW TO FIND IT
Ensure PCAPs PCAPs A packet capture, recorded network packets that can be inspected later. Analysts use it to reconstruct communication and investigate protocol behavior or suspicious traffic. are stored on the external SD card for extended recording sessions on the Flipper Zero WiFi Dev Board.
📍 Verify SD card mod is installed and check that capture files appear in /sd/pcap/ after running scans.
Adds the settings command to access configuration options. Not checked yet Enables saving PCAP files directly to the SD card on the Flipper Zero WiFi Dev Board (requires mod installed). Not checked yet
2 details in Everything
ESP32 Marauder v0.9.11 adds select -a all for AP selection and Flipper Zero LED support
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.9.11 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.9.11
Adds select -a all command to select or deselect all Access Points at once Not checked yet Adds Flipper Zero WiFi Dev Board LED indicator support for sniffing and attacking states Not checked yet
2 details in Everything
ESP32 Marauder v0.9.6 adds Flipper Zero WiFi Dev Board and Marauder Mini hardware support plus a Basic CLI.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.9.6 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.9.6
Adds Flipper Zero WiFi Dev Board support as a new target platform Not checked yet Adds Marauder Mini support as a new target platform Not checked yet Adds Basic CLI support for command-line interaction (more commands coming) Not checked yet Adds configuration file for source compilation Not checked yet
4 details in Everything
Adds Deauthentication Flood capability and updates underlying frameworks.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.9.3 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.9.3
Additional device information under Device Info Not checked yet
1 detail in Everything
Adds ATmega32u4 and ESP8266 hardware checks, AT32u4 BadUSB support, and a restructured menu for sniffers/scanners
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.9.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.9.0
Add ATmega32u4 check enables the tool to verify or configure ATmega32u4 hardware compatibility Not checked yet Add ESP8266 check adds specific detection/validation logic for ESP8266-based devices Not checked yet Redo menu structure for sniffers and scanners reorganizes the UI workflow for RF scanning operations Not checked yet
3 details in Everything
ESP32 Marauder v0.8.0 adds WiFi joining, beacon spamming, and BLE BLE Bluetooth Low Energy, a wireless protocol maintained by the Bluetooth SIG for short-range communication at minimal power draw, making it useful for cyber tools that interact with IoT devices or proximity-based systems. shutdown capabilities
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.8.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.8.0
Adds the ability to join a specified WiFi network via the new Join WiFi command in the General menu. Not checked yet Adds Shutdown WiFi capability to terminate the WiFi interface and conserve RAM RAM Working memory that holds programs and data while a computer is running. Its contents usually disappear when power is removed. . Not checked yet Adds Generate SSIDs feature to produce 20 random Service Set Identifiers for testing. Not checked yet Adds manual SSID creation via the on-screen keyboard with the new Add SSID option. Not checked yet Adds Beacon Spam List functionality to transmit beacon frames and monitor connection attempts. Not checked yet
+1 more
show less
Adds Shutdown BLE command to stop Bluetooth Low Energy operations. Not checked yet
6 details in Everything
ESP32 Marauder v0.4.0 adds OTA firmware update via web page.
└──▷ GET THIS VERSION
copy
$ git clone --branch v0.4.0 https://github.com/justcallmekoko/ESP32Marauder.git
$ git checkout v0.4.0
Adds over-the-air (OTA) firmware update capability accessible through a web interface. Not checked yet
1 detail in Everything